Modeling the valve dynamics in a reciprocating compressor based on two-dimensional computational fluid dynamic numerical simulation

Abstract

This article presents a numerical simulation of the thermodynamic process in the cylinder and dynamics of the self-acting valves for an air reciprocating compressor. The finite-volume method was employed to solve the compressible turbulent flow in the cylinder and through the valves. A single degree-of-freedom model was adopted to simulate the valve dynamics. The piston’s motion was defined by a user’s preset function, and the fluid-structure interaction between the gas flow and the valve dynamics was solved in a strictly coupled fashion. The technique of non-conformal interfaces was adopted to allow fluxes between adjacent zones with different mesh node locations. Based on the analysis of the characteristics of the flow through valves and the valve movement, sensitivity analysis on the valve impact velocity and the angle of inclination indicates that the valve impact velocity was more sensitive to the variation of the rotational speed and the valve lift while severe inclining motion occurs when the valves are installed in the radial direction. Instantaneous gas flow and force coefficients with the variation of valve displacement are also obtained according to the mass-flow rate across the valve and the gas force acting on the ring plate.

Keywords

Reciprocating compressor impact velocity inclining motion gas flow and force coefficient

Get full access to this article

View all access options for this article.

References

Almasi

. Optimum selection and design of reciprocating compressor for petroleum services. Proc IMechE Part E: J Process Mech Eng 2010; 224(1): 63–66.

Ottitsch F and Scarpinato P. CFD a viable engineering tool for compressor valve design or just a toy? In: Proceedings of the international compressor engineering conference at Purdue, West Lafayette, IN, USA, 25–28 July 2000, pp.423–428.

Fagotti F and Possamai FC. Using computational fluid dynamics as a compressor design tool. In: Proceedings of the international compressor engineering conference at Purdue, West Lafayette, IN, USA, 25–28 July 2000, pp.137–144.

Shiva PBG. CFD for positive displacement compressors. In: Proceedings of the international compressor engineering conference at Purdue, New York, USA, 12–15 July 2004, paper no. C133.

Cavallini A, Doretti L, Longo GA, et al. Thermal analysis of a hermetic reciprocating compressor. In: Proceedings of the international compressor engineering conference at Purdue, West Lafayette, IN, USA, 23–26 July 1996, pp.535–540.

Pérez-Segarra

Rigola

Oliva

. Modeling and numerical simulation of the thermal and fluid dynamic behavior of hermetic reciprocating compressors-Part 1: Theoretical basis. HVAC&R Res 2003; 9(2): 215–235.

Negrão

COR

Erthal

Andrade

DEV

. A semi-empirical model for the unsteady-state simulation of reciprocating compressors for household refrigeration applications. Appl Therm Eng 2011; 31(6): 1114–1124.

Habing

Peters

MCAM

. An experimental method for validating compressor valve vibration theory. J Fluid Struct 2006; 22(5): 683–697.

Castaing-Lasvignottes

Gibout

. Dynamic simulation of reciprocating refrigeration compressors and experimental validation. Int J Refrig 2010; 33(2): 381–389.

10.

Stouffs

Tazerout

Wauters

. Thermodynamic analysis of reciprocating compressors. Int J Therm Sci 2001; 40(1): 52–66.

11.

Yaşar

Koçaş

. Computational modeling of hermetic reciprocating compressors. Int J High Perform Comput Appl 2007; 21(1): 30–41.

12.

Abidin Z, Almbauer R, Burgstaller A, et al. Domain decomposition method for 3-Dimensional simulation of the piston cylinder section of a hermetic reciprocating compressor. In: Proceedings of the international compressor engineering conference at Purdue, West Lafayette, IN, USA, 17–20 July 2006, paper no. C078.

13.

Matos FFS, Prata AT and Deschamps CJ. Numerical simulation of the dynamics of reed type valves. In: Proceedings of the international compressor engineering conference at Purdue, West Lafayette, IN, USA, 16--19 July 2002, paper no. C15-2.

14.

Matos FFS, Deschamps CJ and Prata ATT. A two-dimensional simulation model for reciprocating compressors with automatic valves. In: Proceedings of the international compressor engineering conference at Purdue, West Lafayette, IN, USA, 17–20 July 2006, paper no. C053.

15.

Rigola J, Lekmuhl O, Perez-Segarra CD, et al. Numerical simulation of fluid flow through valve reeds based on large eddy simulation models (LES). In: Proceedings of the international compressor engineering conference at Purdue, West Lafayette, IN, USA, 14–17 July 2008, paper no. 1405.

16.

Roland A, Georg M and Herbert S. Valve dynamics and internal waves in a reciprocating compressor. In: Proceedings of the 4th conference of the EFRC, Antwerp, Belgium, 9–10 June 2005, pp.1–10.

17.

Pereira

ELL

Deschamps

Ribas

. Performance analysis of reciprocating compressors through computational fluid dynamics. Proc IMechE Part E: J Process Mech Eng 2008; 222(4): 183–192.

18.

ANSYS, I., Ansys fluent theory guide v. 14.0., 2011.

19.

Salinas-Casanova DA, Deschamps CJ and Prata AT. Turbulent flow through a valve with inclined reeds. In: Proceedings of the international conference on compressors and their systems, London, UK, 13–15 September 1999, pp.443–452.