The rising demand for electric vehicle highlights the importance of developing high performance, reliable and durable drive motors capable of withstanding thermal and mechanical stresses. This study uses CFD and FEM simulations to assess the thermal and mechanical reliability of electric motor drive motors. CFD simulations separately analyzed the stator and rotor oil passages to evaluate cooling performance under varying condition, FEM simulations assessed the strength of the gear, shell and bearings to ensure mechanical reliability. Bench tests validated these findings, confirming the motors ability to achieve maximum speed while maintaining acceptable winding temperatures and operating durations.
KimSEJungCHLeeMG, et al. Thermo-mechanical coupled analysis of electric vehicle drive shafts. Appl Sci2024; 14(24): 11768. https://doi.org/10.3390/app142411768
2.
LiYLiQFanT, et al. Heat dissipation design of end winding of permanent magnet synchronous motor for electric vehicle. Energy Rep2023; 9: 282–288. https://doi.org/10.1016/j.egyr.2022.10.416
3.
GaiYMaCXuY, et al. Numerical prediction and measurement of pressure drop and heat transfer in a water-cooled hollow-shaft rotor for a traction motor application. IET Electric Power Appl2021; 15(4): 476–486. https://doi.org/10.1049/elp2.12042
4.
KimiabeigiMSheridanRSWidmerJD, et al. Production and application of HPMS recycled bonded permanent magnets for a traction motor application. IEEE Trans Ind Electron2018; 65(5): 3795–3804. https://doi.org/10.1109/TIE.2017.2762625
5.
AyachitAKazimierczukMK. Thermal effects on inductor winding resistance at high frequencies. IEEE Magnetics Lett2013; 4: 0500304–0500304. https://doi.org/10.1109/lmag.2013.2286582
6.
HugerDGerlingD. On the effects of high-temperature-induced aging on electrical machine windings. 2015 IEEE International Electric Machines & Drives Conference (IEMDC), Coeur d’Alene, ID, USA, 2015, pp. 1018–1021. DOI: 10.1109/IEMDC.2015.7409186
7.
BennionK. Electric motor thermal management research: Annual Progress Report. 2017. www.nrel.gov/publications.
8.
GaiYKimiabeigiMChuan ChongY, et al. Cooling of automotive traction motors: schemes, examples, and computation methods. IEEE Trans Ind Electron2019; 66(3): 1681–1692. https://doi.org/10.1109/TIE.2018.2835397
9.
GundabattiniEKuppanRSolomonDG, et al. A review on methods of finding losses and cooling methods to increase efficiency of electric machines. Ain Shams University2021; 12: 497–505. https://doi.org/10.1016/j.asej.2020.08.014
ZhangYWangLZhangY, et al. Design and thermal characteristic analysis of motorized spindle cooling system. Adv Mech Eng2021; 13(5): 16878140211020878.
12.
JieD. Thermal performance analysis of motor based on motor-CAD. In: AIP Conference Proceedings, American Institute of Physics Inc. Feb. 2019. https://doi.org/10.1063/1.5090703.
13.
MadhavanSRaunak DevdattaPBGundabattiniE, et al. Thermal analysis and heat management strategies for an induction motor, a Review. Energies2022; 15(21): 8127. https://doi.org/10.3390/en15218127
14.
CredoATursiniMVillaniM, et al. Axial flux pm in-wheel motor for electric vehicles: 3d multiphysics analysis. Energies2021; 14(8): 2107. https://doi.org/10.3390/en14082107
15.
Mebarek-OudinaFLaouiraHHusseinAK, et al. Mixed convection inside a duct with an open trapezoidal cavity equipped with two discrete heat sources and moving walls. Mathematics2022; 10(6): 929. https://doi.org/10.3390/math10060929
16.
BouselsalMMebarek-OudinaFBiswasN, et al. Heat transfer enhancement using Al2O3-MWCNT hybrid-nanofluid inside a tube/shell heat exchanger with different tube shapes. Micromachines2023; 14(5): 1072. https://doi.org/10.3390/mi14051072
ChenBGuanXCaiD, et al. Simulation on thermal characteristics of high-speed motorized spindle. Case Stud Therm Eng2022; 35: 102144. https://doi.org/10.1016/j.csite.2022.102144
19.
JangJHChiuHCYanWM, et al. Numerical study on electromagnetics and thermal cooling of a switched reluctance motor. Case Stud Therm Eng2015; 6: 16–27. https://doi.org/10.1016/j.csite.2015.05.001
20.
SrinivasanCYangXSchlautmanJ, et al. Conjugate heat transfer CFD analysis of an oil cooled automotive electrical motor. In: SAE Technical Papers, SAE International, 2020. https://doi.org/10.4271/2020-01-0168.
LiuGLiuHZhuC, et al. Design optimization of a wind turbine gear transmission based on fatigue reliability sensitivity. Front Mech Eng2021; 16(1): 61–79. https://doi.org/10.1007/s11465-020-0611-5
24.
TanXXieL. Fatigue reliability evaluation method of a gear transmission system under variable amplitude loading. IEEE Trans Reliab2019; 68(2): 599–608. https://doi.org/10.1109/TR.2018.2864202
25.
YanY. Load characteristic analysis and fatigue reliability prediction of wind turbine gear transmission system. Int J Fatigue2020; 130: 105259. https://doi.org/10.1016/j.ijfatigue.2019.105259
26.
HaTKangYKimNS, et al. Cooling effect of oil cooling method on electric vehicle motors with hairpin winding. J Mech Sci Technol2021; 35(1): 407–415. https://doi.org/10.1007/s12206-020-1240-y
27.
WangXFengY. Research on energy consumption optimization control strategy of electric vehicle electric drive oil/water cooling system. Int J Autom Technol2024; 25(3): 595–610. https://doi.org/10.1007/s12239-024-00047-1
28.
GuoFZhangC. Oil cooling method for internal heat sources in the outer rotor hub motor of electric vehicle and thermal characteristics research. Energies2024; 17(24): 6312. https://doi.org/10.3390/en17246312
29.
ChavanSVenkateswarluBLiuJ, et al. Investigating the impact of fluid flow channels and cooling fluids on thermal management of lithium-ion battery: a simulation study. J Therm Anal Calorim2024; 149(4): 1629–1648. https://doi.org/10.1007/s10973-023-12802-0
CaiWWuXZhouM, et al. Review and development of electric motor systems and electric powertrains for new energy vehicles. Automot Innov2021; 4(1): 3–22. https://doi.org/10.1007/s42154-021-00139-z
RenXSunJPengC, et al. Analysis and design method of a combined radial–axial magnetic bearing based on asymmetric factor. IET Electric Power Appl2019; 13(5): 686–693. https://doi.org/10.1049/iet-epa.2018.5347
34.
GrabovicEArtoniAGabicciniM, et al. Exploration of trade-offs between NVH and efficiency in bevel gear design. Forschung im Ingenieurwesen/Engineering Research2023; 87(3): 933–947. https://doi.org/10.1007/s10010-023-00690-7
35.
GaramboisPPerret-LiaudetJRigaudE, et al. NVH robust optimization of gear macro and microgeometries using an efficient tooth contact model. Mech Mach Theory2017; 117: 78–95. https://doi.org/10.1016/j.mechmachtheory.2017.07.008
HonarmandiPZuJWBehdinanK. Reliability-based design optimization of cantilever beams under fatigue constraint. AIAA J2007; 45(11): 2737–2746. https://doi.org/10.2514/1.24807
40.
Dabade VinayakMPatilYR. Optimum design of gear drive for non-linear contact and dynamic analysis by using finite element method. Int Res J Eng Technol2021; 8(1): 1552–1558. www.irjet.net
41.
WeiLYaoCWangH. Finite element analysis of dynamic contact stress of Planetary gear of RV Reducer. In: VijayanSZhengXShankarP, et al. (eds) Advances in intelligent systems and computing. Springer Verlag, 2019, Vol. 929, pp.574–584.
42.
MushiriTMbohwaC. Analysis of a gear train using finite element modelling. In: International conference on operation Exellence and service Engineering, 2015.
43.
PacanaJPacanaA. The impact of geometry errors on the motion transmission of dual path gearing. Adv Sci Technol Res J2016; 10(32): 94–100. https://doi.org/10.12913/22998624/65134
44.
SahooVMaitiR. Evidence of secondary tooth contact in harmonic drive, with involute toothed gear pair, through experimental and finite element analyses of stresses in flex-gear cup. Proc Inst Mech Eng C J Mech Eng Sci2018; 232(2): 341–357. https://doi.org/10.1177/0954406216682541
45.
DongHLiuZYDuanLL, et al. Research on the sliding friction associated spur-face gear meshing efficiency based on the loaded tooth contact analysis. PLoS One2018; 13(6): e0198677. https://doi.org/10.1371/journal.pone.0198677
46.
BengisuMTAkayA. Stick–slip oscillations: dynamics of friction and surface roughness. J Acoust Soc Am1999; 105(1): 194–205.
47.
VlašićekDMilerDMašovićR, et al. Approaches to reducing gear mass and their effects on gearing stresses and deformations. Proc Des Soc2024; 4: 3033–3040. https://doi.org/10.1017/pds.2024.307
48.
SánchezMBPleguezuelosMPedreroJI. Enhanced model of load distribution along the line of contact for non-standard involute external gears. Meccanica2013; 48(3): 527–543. https://doi.org/10.1007/s11012-012-9612-8
49.
LiZZhuYXiongP, et al. Experiment and numerical simulation study of thermal fatigue of an aluminum alloy piston. Fatigue Fract Eng Mater Struct2024; 47(2): 384–396. https://doi.org/10.1111/ffe.14193
50.
HeLShiWXiaX, et al. Research on temperature rise characteristics of vehicle motors under bench working condition. J Electr Eng Technol2021; 16(6): 3135–3143. https://doi.org/10.1007/s42835-021-00853-y
51.
HeLTongBZhangY, et al. Temperature rise characteristics research of integrated electric drive system for vehicles. J Electr Eng Technol2024; 19(7): 4381–4393. https://doi.org/10.1007/s42835-024-01866-z
52.
AdegbiteAONwasikeCNNwaobiaNK, et al. Modern electric motors: a review of sustainable design and maintenance principles: scrutinizing the latest trends focusing on motor efficiency, sustainability, recyclability, and reduced maintenance. World J Adv Res Rev2023; 20(3): 1198–1211.
53.
LiBZhaoJMouQ, et al. Research on torque characteristics of a modular arc-linear flux switching permanent-magnet motor. IEEE Access2019; 7: 57312–57320. https://doi.org/10.1109/ACCESS.2019.2913952
