With the goal of enhancing the efficiency of electric vehicles and improving the driving range, the appropriate dimensioning, so-called “right-sizing,” of the electric machines is a promising approach. This paper presents an efficient approach of scaling the thermal parameters in a low order lumped parameter thermal network (LPTN) model to estimate the temperature of the scaled permanent magnet synchronous machine (PMSM) by taking into account the temperature dependence of the power losses. At an early stage of development, the proposed scaling approach enables a preliminary evaluation of the thermal limit of the PMSM within the optimization of the electric powertrain and offers a notable benefit in that the low order LPTN model can easily be parameterized and scaled based on the experimental measurements. Validation for both axial scaling and radial scaling with factors ranging from 0.8 to 1.2 was carried out on a previously validated Ansys Motor-CAD model for typical automotive driving cycles. The maximum temperature error between the scaling approach and the Ansys Motor-CAD model is less than 3.5°C.
AndertJKöhlerENiehuesJ, et al. KSPG range extender. MTZ Worldwide2012; 73(5): 12–18.
2.
WahlAWellmannCKrautwigB, et al. Efficiency increase through model predictive thermal control of electric vehicle powertrains. Energies2022; 15(4): 1476.
3.
NunzioGDGharbiaIBSciarrettaA. A time- and energy-optimal routing strategy for electric vehicles with charging constraints. In: 2020 IEEE 23rd international conference on intelligent transportation systems (ITSC), Rhodes, Greece, 20–23 September 2020, pp.1–8. New York: IEEE.
4.
NgoCSolano-AraqueEAguado-RojasM, et al. Real-time eco-driving for connected electric vehicles. IFAC Pap OnLine2021; 54(10): 126–131.
5.
ChakrabortySBaghdadiMEJaguemontJ, et al. Parameterized cloud-connected electro-thermal modelling of a battery electric vehicle. In: 2021 IEEE vehicle power and propulsion conference (VPPC), Gijon, Spain, 25–28 October 2021.
6.
DominguesGReinapAAlakulaM. Design and cost optimization of electrified automotive powertrain. In: 2016 international conference on electrical systems for aircraft, railway, ship propulsion and road vehicles & international transportation electrification conference (ESARS-ITEC), Toulouse, France, 2–4 November 2016.
7.
ArouaALhommeWVerbelenF, et al. Impact of scaling laws of permanent magnet synchronous machines on the accuracy of energy consumption computation of electric vehicles. eTransportation2023; 18: 100269.
8.
KaltSErhardJLienkampM.Electric machine design tool for permanent magnet synchronous machines and induction machines. Machines2020; 8(1): 15.
9.
GletterCMayerAKalloJ, et al. A novel approach for development of neural network based electrical machine models for HEV system-level design optimization. In: Proceedings of the 5th international conference on vehicle technology and intelligent transport systems. Crete, Greece: SCITEPRESS -Science and Technology Publications, 2019, pp. 17–24. DOI: 10.5220/0007570300170024.
10.
StipeticSZarkoDPopescuM. Scaling laws for synchronous permanent magnet machines. In: 2015 tenth international conference on ecological vehicles and renewable energies (EVER), Monte Carlo, Monaco, 31 March–2 April 2015, pp.1–7. New York: IEEE.
11.
StipeticSZarkoDPopescuM.Ultra-fast axial and radial scaling of synchronous permanent magnet machines. IET Electr Power Appl2016; 10(7): 658–666.
12.
StipeticSGossJZarkoD, et al. Calculation of efficiency maps using a scalable saturated model of synchronous permanent magnet machines. IEEE Trans Ind Appl2018; 54(5): 4257–4267.
13.
PauliFRufAHameyerK. Thermal overload capability of permanent magnet synchronous motors employing scaling laws. In: 2018 XIII international conference on electrical machines (ICEM), Alexandroupoli, Greece, 3–6 September 2018, pp.433–439. New York: IEEE.
14.
MakowskiNHelenbrookB. Scaling of permanent magnet machines with thermal effects. In: 2019 IEEE international electric machines & drives conference (IEMDC), San Diego, CA, USA, 12–15 May 2019, pp.2035–2041. New York: IEEE.
15.
Marquez-FernandezFReinapAHuangZ, et al. Dynamic evaluation of the overloading potential of a convection cooled permanent magnet synchronous motor. In: 2011 IEEE international electric machines & drives conference (IEMDC), Niagara Falls, ON, Canada, 15–18 May 2011.
16.
Domingues-OlavarriaGMarquez-FernandezFJFyhrP, et al. Optimization of electric powertrains based on scalable cost and performance models. IEEE Trans Ind Appl2019; 55(1): 751–764.
17.
KuenzlerMPfluegerRLehmannR, et al. Scalable thermal model of an electric machine for the thermal assessment in different electric vehicle use cases. In: 2020 international symposium on power electronics, electrical drives, automation and motion (SPEEDAM), Sorrento, Italy, 24–26 June 2020, pp.281–286. New York: IEEE.
18.
RamakrishnanKStipeticSGobbiM, et al. Optimal sizing of traction motors using scalable electric machine model. IEEE Trans Transp Electrif2018; 4(1): 314–321.
19.
WahlAWellmannCMonissenC, et al. Active temperature control of electric drivetrains for efficiency increase. Appl Energy2023; 338: 120887.
MellorPWrobelRSimpsonN. AC losses in high frequency electrical machine windings formed from large section conductors. In: 2014 IEEE energy conversion congress and exposition (ECCE), Pittsburgh, PA, USA, 14–18 September 2014.
22.
DenisNOdawaraSFujisakiK. Attempt to evaluate the building factor of a stator core in inverter-fed permanent magnet synchronous motor. IEEE Trans Ind Electron2017; 64(3): 2424–2432.
23.
BogliettiACavagninoAStatonD, et al. Evolution and modern approaches for thermal analysis of electrical machines. IEEE Trans Ind Electron2009; 56(3): 871–882.
24.
StatonDCavagninoA. Convection heat transfer and flow calculations suitable for analytical modelling of electric machines. In: IECON 2006-32nd annual conference on IEEE industrial electronics, Paris, France, 6–10 November 2006, pp.4841–4846. New York: IEEE.
25.
HuberTPetersWBockerJ. A low-order thermal model for monitoring critical temperatures in permanent magnet synchronous motors. In: 7th IET international conference on power electronics, machines and drives, Manchester, UK, 8–10 April 2014, pp.1–6. The Institution of Engineering and Technology.
26.
ChenBWulffCEtzoldK, et al. A comprehensive thermal model for system-level electric drivetrain simulation with respect to heat exchange between components. In: 2020 19th IEEE intersociety conference on thermal and thermomechanical phenomena in electronic systems (ITherm), Orlando, FL, USA, 21–23 July 2020, pp.558–567. New York: IEEE.
WallscheidOBöckerJ. Global identification of a low-order lumped-parameter thermal network for permanent magnet synchronous motors. IEEE Trans Energy Convers2016; 31(1): 354–365.
29.
DonckerRWDPulleDWJVeltmanA. Advanced electrical drives. Cham: Springer International Publishing, 2020.
30.
GossJMellorPWrobelR, et al. The design of AC permanent magnet motors for electric vehicles: a computationally efficient model of the operational envelope. In: 6th IET international conference on power electronics, machines and drives (PEMD 2012), Bristol, 27–29 March 2012.
31.
ChenBMonissenCAyyildizM, et al. A study on scaling laws for thermal parameters of permanent magnet synchronous machines. In: 2021 24th international conference on electrical machines and systems (ICEMS), Gyeongju, Republic of Korea, 31 October–3 November 2021, pp.35–41. New York: IEEE.
32.
WalterELPronzato. Identification of parametric models. Berlin, Heidelberg: Springer-Verlag, 1997.
33.
SchlueterMEgeaJABangaJR. Extended ant colony optimization for non-convex mixed integer nonlinear programming. Comput Oper Res2009; 36(7): 2217–2229.
34.
SchlueterMErbSOGerdtsM, et al. MIDACO on MINLP space applications. Adv Space Res2013; 51(7): 1116–1131.
35.
MahmoudiASoongWLPellegrinoG, et al. Loss function modeling of efficiency maps of electrical machines. IEEE Trans Ind Appl2017; 53(5): 4221–4231.
