Optimization of the transmission characteristics of an HMCVT for a high-powered tractor based on an improved NSGA-II algorithm

Abstract

The hydro-mechanical continuously variable transmission (HMCVT) is a critical component of the power transmission system in a tractor. However, the complexity of the operating conditions imposes high requirements on the transmission characteristics. To improve the powerful performance and economy of HMCVTs and satisfy the operational demands of high-powered tractors, a new optimization design method for the characteristic parameters of an HMCVT is proposed. First, the characteristics of an HMCVT are modeled, and the influence of the structural parameters on the transmission characteristics is analyzed. Then, HMCVT performance evaluation indexes are formulated. In accordance with the speed regulation of system, power performance, and economy characteristics, a multi-objective optimization mathematical model is established, and an improved fast non-dominated sorting genetic algorithm (INSGA-II) is designed. The introduction of a normal distribution crossover operator (NDX) and an improved adaptive adjustment mutation operator not only ensures the population diversity but also improves the Pareto solution convergence properties during the process of genetic evolution. The superiority of INSGA-II is verified by comparison with a traditional multi-objective genetic algorithm. Finally, the optimization results show that the torque ratio is increased by approximately 2.81%, 14.32%, 2.31%, and 15.07% in HM1, HM2, HM3, and HM4 respectively. The transmission efficiency is increased by approximately 3.48% and 1.97% in HM1 (HM3) and HM2 (HM4). Also, INSGA-II finds the optimal solution with a faster speed and shorter optimization time than MULGA. This research can serve as a reference for the design and optimization of HMCVTs for high-powered tractors.

Keywords

Transmission characteristics high-powered tractor HMCVT INSGA-II multi-objective optimization

Get full access to this article

View all access options for this article.

References

Mattetti

Maraldi

Sedoni

, et al. Optimal criteria for durability test of stepped transmissions of agricultural tractors. Biosyst Eng 2019; 178: 145–155.

Linares

Méndez

Catalán

. Design parameters for continuously variable power-split transmissions using planetaries with 3 active shafts. J Terramechanics 2010; 47(5): 323–335.

Zhu

Gao

Cao

, et al. Research on the shift strategy of HMCVT based on the physical parameters and shift time. Appl Math Model 2016; 40(15–16): 6889–6907.

Xia

Sun

. Characteristic analysis on a new hydro-mechanical continuously variable transmission system. Mech Mach Theory 2018; 126: 457–467.

Liu

, et al. Design of multi-range hydro-mechanical transmission using modular method. Mech Syst Signal Process 2019; 126: 1–20.

Xia

Sun

Qin

, et al. Optimisation of the power-cycle hydro-mechanical parameters in a continuously variable transmission designed for agricultural tractors. Biosyst Eng 2020; 193: 12–24.

Cheong

Chase

. Optimal design of power-split transmissions for hydraulic hybrid passenger vehicles. New York: IEEE, 2011. pp.3295–3300.

Cammalleri

Rotella

. Functional design of power-split CVTs: an uncoupled hierarchical optimized model. Mech Mach Theory 2017; 116: 294–309.

Rotella

Cammalleri

. Direct analysis of power-split CVTs: a unified method. Mech Mach Theory 2018; 121: 116–127.

10.

Wan

Dai

Zeng

, et al. Characteristic analysis and co-validation of hydro-mechanical continuously variable transmission based on the wheel loader. Appl Sci 2020; 10(17): 5900.

11.

İnce

Güler

. On the advantages of the new power-split infinitely variable transmission over conventional mechanical transmissions based on fuel consumption analysis. J Clean Prod 2020; 244: 118795.

12.

Cheng

Qian

. A new non-geometric transmission parameter optimization design method for HMCVT based on improved GA and maximum transmission efficiency. Comput Electron Agric 2019; 167: 105034.

13.

Rossetti

Macor

. Multi-objective optimization of hydro-mechanical power split transmissions. Mech Mach Theory 2013; 62: 112–128.

14.

Kim

Park

, et al. Influence of soil moisture content on the traction performance of a 78-kW agricultural tractor during plow tillage. Soil Tillage Res 2021; 207: 104851.

15.

Cao

Cheng

, et al. Hydro-mechanical power split transmissions: progress evolution and future trends. Proc IMechE, Part D: J Automobile Engineering 2019; 233(3): 727–739.

16.

Macor

Rossetti

. Optimization of hydro-mechanical power split transmissions. Mech Mach Theory 2011; 46(12): 1901–1919.

17.

Renius

Resch

. Continuously variable tractor transmission. In: Agriculture equipment technology conference, Louisville, USA, 14–16 February 2005, pp.1–37. Kentuck: American Society of Agricultural Engineers.

18.

Qin

Liu

. Shift schedule optimization for dual clutch transmissions. In: IEEE vehicle power and propulsion conference, Dearborn, MI, USA, 7–10 September 2009, pp. 1071–1078. Dearborn: IEEE.

19.

Xia

Zong

Tang

, et al. Integrated control strategy of tractor hydromechanical continuously variable transmission. Proc IMechE, Part D: J Automobile Engineering 2021; 235(2-3): 649–671.

20.

You

Sun

Qin

. Shift strategy of a new continuously variable transmission based wheel loader. Mech Mach Theory 2018; 130: 313–329.

21.

Xiao

Zhao

Wang

, et al. Research on system identification based on hydraulic pump-motor of HMCVT. Eng Agric Environ Food 2019; 12(4): 420–426.

22.

Savaresi

Taroni

Prevedi

, et al. On the design and tuning of the controllers in a power-split continuously variable transmission for agricultural tractors. Proc IMechE, Part D: J Automobile Engineering 2003; 217(8): 745–759.

23.

Wang

Song

Wang

, et al. Shift quality of tractors fitted with hydrostatic power split CVT during starting. Biosyst Eng 2020; 196: 183–201.

24.

Kumar

Sarkar

, et al. Condition monitoring of hydraulic transmission system with variable displacement axial piston pump and fixed displacement motor. Mater Today Proc 2021; 46: 9758–9765.

25.

Jia

, et al. Parameter matching and optimal energy management for a novel dual-motor multi-modes powertrain system. Mech Syst Signal Process 2019; 116: 113–128.

26.

Zhou

Qin

. Multi-objective optimization design and performance evaluation for plug-in hybrid electric vehicle powertrains. Appl Energy 2017; 208: 1608–1625.

27.

Korchuganov

Smygacheva

Fomin

. Multi-objective optimization of the synchrotron radiation source Siberia-2 lattice using a genetic algorithm. Phys Part Nucl Lett 2018; 15(1): 92–96.

28.

Deb

Jain

. An evolutionary many-objective optimization algorithm using reference-point-based nondominated sorting approach, part I: solving problems with box constraints. IEEE Trans Evol Comput 2014; 18(4): 577–601.

29.

Tan

Lee

Khor

. Evolutionary algorithms for multi-objective optimization: performance assessments and comparisons. Artif Intell Rev 2002; 17(4): 251–290.