A series of papers has previously presented a semi-physical model for NOx and soot emissions prediction for diesel engines. In this paper, the work is continued with an original analysis of the model’s capacity to be ported to a new engine and a sensitivity analysis of the number of training points required to obtain the desired accuracy. These two aspects are rarely developed in similar studies.
BauerCHoferJAlthausHJ, et al. The environmental performance of current and future passenger vehicles: life cycle assessment based on a novel scenario analysis framework. Appl Energ2015; 157: 871–883.
4.
SteinerSBisigCPetri-FinkA, et al. Diesel exhaust: current knowledge of adverse effects and underlying cellular mechanisms. Arch Toxicol2016; 90: 1541–1553. http://www.ncbi.nlm.nih.gov/pubmed/27165416
5.
Raaschou-NielsenOAndersenZJBeelenR, et al. Air pollution and lung cancer incidence in 17 European cohorts: prospective analyses from the European Study of Cohorts for Air Pollution Effects (ESCAPE). Lancet Oncol2013; 14: 813–822.
6.
KarakyH. Modélisation phénoménologique des émissions de NOx et particules pour la mise au point des moteurs Diesel automobiles. Nantes: École Centrale de Nantes, 2016.
7.
BarbaCBurkhardtCBoulouchosK, et al. A phenomenological combustion model for heat release rate prediction in high-speed DI diesel engines with common rail injection. SAE technical paper 2000-01-2933, 2000.
8.
KarakyHMauviotGTauziaX, et al. Semi-empirical 0D modeling for engine-out soot emission prediction in D.I. diesel engines. SAE technical paper 2016-01-0562, 2016.
9.
KarakyHMauviotGTauziaX, et al. Development and validation of a new zero-dimensional semi-physical NOx emission model for a D.I. diesel engine using simulated combustion process. SAE Int J Engines2015; 8: 1924–1937.
10.
RakopoulosCDGiakoumisEG. Review of thermodynamic diesel engine simulations under transient operating conditions. SAE technical paper 2006-01-0884, 2006.
11.
ChengXChenLHongG, et al. Modeling study of soot formation and oxidation in di diesel engine using an improved soot model. Appl Therm Eng2014; 62: 303–312.
12.
AnHYangWLiJ, et al. A numerical modeling on the emission characteristics of a diesel engine fueled by diesel and biodiesel blend fuels. Appl Energy2014; 130: 458–465.
13.
LiHYangWZhouD, et al. Numerical study of the effects of biodiesel unsaturation on combustion and emission characteristics in diesel engine. Appl Therm Eng2018; 137: 310–318.
14.
MaghbouliAYangWAnH, et al. An advanced combustion model coupled with detailed chemical reaction mechanism for D.I diesel engine simulation. Appl Energy2013; 111: 758–770.
15.
TaghavifarHTaghavifarHMardaniA, et al. Modeling the impact of in-cylinder combustion parameters of di engines on soot and NOx emissions at rated EGR levels using ANN approach. Energ Convers Manage2014; 87: 1–9.
16.
TaghavifarHTaghavifarHMardaniA, et al. Appraisal of artificial neural networks to the emission analysis and prediction of CO2, soot, and NOx of n-heptane fueled engine. J Clean Prod2016; 112: 1729–1739.
17.
IsmailHMNgHKQueckCW, et al. Artificial neural networks modelling of engine-out responses for a light-duty diesel engine fuelled with biodiesel blends. Appl Energ2012; 92: 769–777.
18.
ChannapattanaSVPawarAAKamblePG. Optimisation of operating parameters of DI-CI engine fueled with second generation bio-fuel and development of ANN based prediction model. Appl Energ2017; 187: 84–95.
19.
GrahnMJohanssonKMcKelveyT. Data-driven emission model structures for diesel engine management system development. Int J Engine Res2014; 15: 906–917.
20.
D’AmbrosioSFinessoRFuL, et al. A control-oriented real-time semi-empirical model for the prediction of NOx emissions in diesel engines. Appl Energ2014; 130: 265–279.
21.
BernardGLebasRDemoulinF-X. A 0D phenomenological model using detailed tabulated chemistry methods to predict diesel combustion heat release and pollutant emissions. SAE technical paper, 2011, https://www.sae.org/content/2011-01-0847/ (accessed 19 September 2019).
22.
GoncaGSahinBParlakA, et al. Theoretical and experimental investigation of the Miller cycle diesel engine in terms of performance and emission parameters. Appl Energ2015; 138: 11–20.
23.
LebasRFremoviciMFontG, et al. A phenomenological combustion model including in-cylinder pollutants to support engine control optimisation under transient conditions. SAE technical paper 2011-01-1837, 2011.
24.
OppenauerKSdel ReL. Hybrid 2-zone diesel combustion model for no formation. SAE Int J Engines2010; 2: 584–594.
25.
QuérelCGrondinOLetellierC. A semi-physical NOx model for diesel engine control. SAE technical paper 2013-01-0356, 2013.
26.
ArsieIDiGenova FPianeseC, et al. Development and identification of phenomenological models for combustion and emissions of common-rail multi-jet diesel engines. SAE technical paper 2004-01-1877, 2004.
27.
SavvaNHountalasD. Detailed evaluation of a new semi-empirical multi-zone NO x model by application on various diesel engine configurations. SAE technical paper, 2012, https://www.sae.org/content/2012-01-1156/ (acces-sed 15 October 2019).
28.
HiroyasuHKadotaTAraiM. Development and use of a spray combustion modeling to predict diesel engine efficiency and pollutant emissions : part 1 combustion modeling. Bullet JSME1983; 26: 569–575. http://joi.jlc.jst.go.jp/JST.Journalarchive/jsme1958/26.569?from=CrossRef (accessed 19 September 2019).
29.
FinessoRMisulDSpessaE. Development and validation of a semi-empirical model for the estimation of particulate matter in diesel engines. Energ Convers Manage2014; 84: 374–389.
30.
PötschCOfnerH. Assessment of a multi zone combustion model for analysis and prediction of CI engine combustion and emissions. SAE technical paper 2011-01-1439, 2011.
31.
SinghSReitzRDMusculusMPB, et al. Validation of engine combustion models against detailed in-cylinder optical diagnostics data for a heavy-duty compression-ignition engine. Int J Engine Res2007; 8: 97–126.
ÇebiECRottenkolberGUyarE. In-cylinder pressure based real-time estimation of engine-out particulate matter emissions of a diesel engine. SAE technical paper 2011-01-1440, 2011.
34.
AsprionJChinellatoOGuzzellaL. A fast and accurate physics-based model for the NOx emissions of diesel engines. Appl Energ2013; 103: 221–233.
35.
GuardiolaCMartínJPlaB, et al. Cycle by cycle NOx model for diesel engine control. Applied Thermal Engineering2017; 110: 1011–1020.
36.
GrahnMJohanssonKVartiaC, et al. A structure and calibration method for data-driven modeling of NO X and soot emissions from a diesel engine. SAE technical paper 2012-01-0355, 2012.
37.
BarroCObrechtPBoulouchosK. Development and validation of a virtual soot sensor: part 1: steady-state engine operation. Int J Engine Res2014; 15: 719–730.
38.
AsprionJChinellatoOGuzzellaL. Optimisation-oriented modelling of the NOx emissions of a diesel engine. Energ Convers Manage2013; 75: 61–73.
39.
RakopoulosCDAntonopoulosKARakopoulosDC. Development and application of multi-zone model for combustion and pollutants formation in direct injection diesel engine running with vegetable oil or its bio-diesel. Energ Convers Manage2007; 48: 1881–1901.
40.
PeriniFMattarelliEPaltrinieriF. Development and validation of predictive emissions schemes for quasi-dimensional combustion models. SAE technical paper 2010-01-0148, 2010.
41.
PariotisEGHountalasDTRakopoulosCD. Sensitivity analysis of multi-zone modeling for combustion and emissions formation in diesel engines. SAE technical paper 2006-01-1383, 2006.
42.
RaptotasiosSISakellaridisNFPapagiannakisRG, et al. Application of a multi-zone combustion model to investigate the NOx reduction potential of two-stroke marine diesel engines using EGR. Appl Energ2015; 157: 814–823.
43.
LafossasF-AMarbaixMMenegazziP. Development and application of a 0D D.I. diesel combustion model for emissions prediction. SAE technical paper, 2007, https://www.sae.org/content/2007-01-1841/ (accessed 11 October 2019).
44.
TauziaXMaiboomAKarakyH. Semi-physical models to assess the influence of CI engine calibration parameters on NOx and soot emissions. Appl Energ2017; 208: 1505–1518.
45.
WoschniG. A universally applicable equation for the instantaneous heat transfer coefficient in the internal combustion engine. SAE technical paper670931, 1967.
