Active camber system for lateral stability improvement of urban vehicles

Abstract

A suspension system with the capability of cambering has an additional degree of freedom for changing camber angle to increase the maximum lateral tire force. This study investigates the effects of cambering on overall vehicle stability with emphasis on applications to urban vehicles. A full vehicle model with a reliable tire model including camber effects is employed to investigate the vehicle dynamics behavior under cambering. Besides, a linearized vehicle model is used to analytically study the effects of camber lateral forces on vehicle dynamics. Vehicle behavior for different configurations of camber angles in front and rear wheels is studied and compared. Then, an active camber system is suggested for improvement of vehicle lateral stability. Specifically, performances of active front camber, active rear camber, and their combination are investigated. The results show that a proper strategy for camber control can improve both yaw rate and sideslip angle, simultaneously. Finally, the active front camber system is compared with the well-known active front steering. It is shown that, utilizing more friction forces at the limits, active front camber is more effective in improving maneuverability and lateral stability than active front steering.

Keywords

Active camber system lateral stability control variable camber suspension urban vehicles optimal control

Get full access to this article

View all access options for this article.

References

Rajamani

Vehicle dynamics and control. New York: Springer, 2011.

Ataei

Khajepour

Jeon

A novel reconfigurable integrated vehicle stability control with Omni actuation systems. IEEE T Veh Technol 2017; 67: 2945–2957.

Ataei

Asadi

Goodarzi

, et al. Multi-objective optimization of a hybrid electromagnetic suspension system for ride comfort, road holding and regenerated power. J Vib Control 2017; 23: 782–793.

Manning

Crolla

DA.

A review of yaw rate and sideslip controllers for passenger vehicles. T I Meas Control 2007; 29: 117–135.

Beal

CE.

Applications of model predictive control to vehicle dynamics for active safety and stability. PhD Thesis, Stanford University, Stanford, CA, 2011.

Ataei

Khajepour

Jeon

A General Rollover Index for Tripped and Un-tripped Rollovers on Flat and Sloped Roads. Proc IMechE, Part D: J Automobile Engineering 2017; 233: 304–316.

Khajepour

Fallah

Goodarzi

Electric and hybrid vehicles: technologies, modeling and control—a mechatronic approach. Hoboken, NJ: John Wiley & Sons, 2014.

Ataei

Reconfigurable integrated control for urban vehicles with different types of control actuation. PhD Thesis, University of Waterloo, Ontario, Canada, 2017. http://hdl.handle.net/10012/12690

Ataei

Khajepour

Jeon

Model predictive rollover prevention for steer-by-wire vehicles with a new rollover index. Int J Control. Epub ahead of print 20 October 2018. DOI: 10.1080/00207179.2018.1535198.

10.

Laws

SM.

An active camber concept for extreme maneuverability: mechatronic suspension design, tire modeling, and prototype development. PhD Thesis, Stanford University, Stanford, CA, 2010.

11.

Ammon

Vehicle dynamics analysis tasks and related tyre simulation challenges. Veh Syst Dyn 2005; 43: 30–47.

12.

Németh

Gáspár

. Integration of control design and variable geometry suspension construction for vehicle stability enhancement. In: Proceedings of the IEEE conference on decision and control and European control conference, Orlando, FL, 12–15 December 2011, pp.7452–7457. New York: IEEE.

13.

Németh

Gáspár

Challenges and possibilities in variable geometry suspension systems. Period Polytech Transp Eng 2012; 40: 81–86.

14.

Esfahani

MIM

Mosayebi

Pourshams

, et al. Optimization of double wishbone suspension system with variable camber angle by hydraulic mechanism. World Acad Sci Eng Technol 2010; 4: 237–244.

15.

Park

Sohn

JH.

Effects of camber angle control of front suspension on vehicle dynamic behaviors. J Mech Sci Technol 2012; 26: 307–313.

16.

Hotiguchi

Mizuno

Jones

, et al. Active camber control. In: Proceedings of the FISITA 2012 world automotive congress, Beijing, China, 27–30 November 2012, pp.247–256. Heidelberg: Springer.

17.

Kuwayama

Baldoni

Cheli

. A full vehicle model for the development of a variable camber suspension. In: Proceedings of the ASME 2007 international design engineering technical conferences and computers and information in engineering conference, Las Vegas, NV, 4–7 September 2007. New York: ASME.

18.

Ataei

Khajepour

Jeon

Reconfigurable integrated stability control for four- and three-wheeled urban vehicles with flexible combinations of actuation systems. IEEE/ASME T Mech 2018; 23: 2031–2041.

19.

Kuwayama

Baldoni

Cheli

Development of a control strategy for a variable camber suspension. Int J Mech Control 2007; 08: 38–52.

20.

Kuwayama

Baldoni

Cheli

. Development of a variable camber controller along with a state observer. In: Proceedings of the 9th international symposium on advanced vehicle control, AVEC’08, Kobe, Japan, 6–8 October 2008. Soc. of Automotive Engineers of Japan.

21.

Edrén

Motion modelling and control strategies of over-actuated vehicles. PhD Thesis, KTH University, Stockholm, 2014.

22.

Jerrelind

Edrén

, et al. Exploring active camber to enhance vehicle performance and safety. In: Proceedings of the 23rd international symposium on dynamics of vehicles on roads and tracks, Qingdao, China, 19–23 August 2013.

23.

Shyrokau

Wang

Lienkamp

. Integrated vehicle dynamics control based on control allocation with subsystem coordination. In: Proceedings of the 23rd IAVSD international symposium on dynamics of vehicles on roads and tracks, Qingdao, China, 19–23 August 2013.

24.

Ataei

Khajepour

Jeon

Rollover stabilities of three-wheeled vehicles including road configuration effects. Proc IMechE, Part D: J Automobile Engineering 2017; 231: 859–871.

25.

Tang

Ataei

Khajepour

A reconfigurable integrated control for narrow tilting vehicles. IEEE T Veh Technol 2018; 68: 233–244.

26.

Evangelou

Control and stability analysis of two-wheeled road vehicles. PhD Thesis, University of London, London, 2003.

27.

Pacejka

Tire and vehicle dynamics. New York: Elsevier, 2005.

28.

Esmailzadeh

Goodarzi

Vossoughi

GR.

Optimal yaw moment control law for improved vehicle handling. Mechatronics 2003; 13: 659–675.

29.

Rabik

Muthuramalingam

Tracking and locking system for shooter with sensory noise cancellation. IEEE Sens J 2018; 18: 732–735.