This paper presents a method of identifying the dynamic characteristics of tyres for non-steady-state conditions on the basis of road measurements on a vehicle. The side force acting on the tyre is presented as a function of not only the slip angle but also the slip angle derivative (i.e. the velocity of the change in the slip angle). Hence, the influence of the manoeuvre dynamics on the tyre characteristics and the difference between the characteristics obtained for steady-state conditions and the characteristics for non-steady-state conditions are shown. Also the results of computer simulations prepared for different types of tyre characteristics are presented in this paper. It is evident from the presented graphs that applying dynamic non-linear tyre characteristics for computer simulations instead of steady-state characteristics enables us to describe the real motion of a vehicle better.
WangJHsiehMF. Vehicle yaw-inertia- and mass-independent adaptive steering control. Proc IMechE Part D: J Automobile Engineering2009; 223(9): 1101–1108.
2.
MancosuFArosioD. Vehicle, road, tyre and electronic control systems interaction: increasing vehicle active safety by means of a fully integrated model for behaviour prediction in potentially dangerous situations. In: IEEE international symposium on industrial electronics, Dubrovnik, Croatia, 20–23 June 2005, Vol 1, pp. 337–342. New York: IEEE.
3.
PacejkaHB. Tyre and vehicle dynamics. 2nd edition. Amsterdam: Elsevier, 2006, pp. 586–594.
StańczykTLStachowskiP. Assessment of the possibilities of determining the characteristics of a pneumatic tyre with the use of an original road test system. Arch Automot Engng2013; 1: 65–83.
8.
KimJ. Identification of lateral tyre force dynamics using an extended Kalman filter from experimental road test data. Control Engng Practice2009; 17: 357–367.
MizunoM. Development of tire side force model based on “magic formula” with the influence of tire surface temperature. R&D Rev Toyota CRDL2003; 38: 17–22.
11.
DoumiatiMSenameODugardL. Integrated vehicle dynamics control via coordination of active front steering and rear braking. Eur J Control2013; 19: 121–143.
12.
BobierCG. A phase portrait approach to vehicle stabilization and envelope control. PhD Thesis, Stanford University, Stanford, California, USA, 2012.
13.
TavasoliA. An optimizing scheme to achieve maximum handling with guaranteed vehicle dynamics stability. Aust J Basic Appl Sci2011; 11: 1989–2001.
14.
FarroniF. T.R.I.C.K.-tire/road interaction characterization & knowledge – a tool for the evaluation of tire and vehicle performances in outdoor test sessions. Mech Systems Signal Processing2016; 72–72; 808–831.
15.
FarroniF. Development of a grip and thermodynamics sensitive tyre/road interaction forces characterization procedure employed in high-performance vehicles simulation. PhD Thesis, Università degli Studi di Napoli Federico II, Naples, Italy, 2014.
16.
BaffetGChararaAStephantJ. Sideslip angle, lateral tire force and road friction estimation in simulations and experiments. In: 2006 IEEE international conference on control applications, 2006 IEEE international symposium on intelligent control, 2006 IEEE computer aided control system design, Munich, Germany, 4–6 October 2006, pp. 903–908. New York: IEEE.
17.
EsmailzadehEGoodarziAVossoughiGR. Optimal yaw moment control law for improved vehicle handling. Mechatronics2003; 13: 659–675.
18.
HiraokaTKumamotoHNishiharaO. Sideslip angle estimation and active front steering system based on lateral acceleration data at centers of percussion with respect to front/rear wheels. JSAE Rev2004; 25: 37–42.
19.
LenainRThuilotBCariouCMartinetP. Mixed kinematic and dynamic sideslip angle observer for accurate control of fast off-road mobile robots. J Field Robotics2010; 27: 181–196.
20.
MokhiamarOAbeM. Effects of model response on model following type of combined lateral force and yaw moment control performance for active vehicle handling safety. JSAE Rev2002; 23: 473–480.
21.
MashadiBMostaghimiH. Effects of the lateral compliance of the suspension on the vehicle-handling responses. Proc IMechE Part D: J Automobile Engineering2015; 229: 641–655.
22.
BeroteJDarlingJPlummerA. Lateral dynamics simulations of a three-wheeled tilting vehicle. Proc IMechE Part D: J Automobile Engineering2015; 229: 342–356.
23.
LuDGuoK. Tire side slip rolling simulation with flexible carcass. In: 2011 3rd international conference on advanced computer control, Harbin, Heilongjiang, People’s Republic of China, 18–20 January 2011, pp. 60–64. New York: IEEE.
24.
LiangWMedanicJRuhlR. Analytical dynamic tire model. Veh System Dynamics2008; 46: 197–227.
25.
LukowskiSMomotMKraemerDKunzD. Basic linear theory of handling and stability of automobiles. Proc IMechE Part D: J Automobile Engineering2009; 223: 1–10.
26.
ReńskiASarH. Identification of tyres’ characteristics and vehicle’s yaw moment of inertia on the basis of road tests (in Polish). Proc Inst Veh2005; 59: 19–29.
27.
PokorskiJBielińskiM. Measuring system for testing of motion stability of motor vehicles (in Polish). Proc Inst Veh2003; 51: 17–30.
28.
PacejkaHB. Spin: camber and turning. Veh System Dynamics2005; 43(Suppl 1): 3–17.
29.
Virzì MariottiGFicarraG. Optimization of the characteristic angles of both front and rear McPherson suspensions on a circular track using multi-body numerical simulation. Proc IMechE Part D: J Automobile Engineering2009; 223: 1119–1132.
30.
TakácsDOroszGStépánG. Delay effects in shimmy dynamics of wheels with stretched string-like tyres. Eur J Mech A – Solids2009; 28: 516–525.
31.
LutyW. An analysis of tire relaxation in conditions of the wheel side cornering angle oscillations. J KONES, Powertrain Transport2011; 18: 325–332.
32.
LutyW. An analysis of truck tires porperties in aspect of non-steady-state cornering resistance (in Polish). Proc Inst Veh2000; 38: 5–12.
33.
RillG. First order tire dynamics. In: III European conference on computational mechanics. solids, structures and coupled problems in engineering (eds MotasoaresCAMartinsJACRodriguesHC.), Lisbon, Portugal, 5–8 June 2006, pp. 1–9. Berlin: Springer.
34.
FundowiczP. Obtaining the side slip characteristics of vehicle (in Polish). Proc Inst Veh1999; 34: 81–92.
35.
LugnerPPacejkaHBPlöchlM. Recent advances in tyre models and testing procedures. Veh System Dynamics2005; 43: 413–436.
36.
ISO 4138:2012. Passenger cars – steady-state circular driving behaviour – open-loop test methods. Geneva: International Organization for Standardization.
37.
ISO 3888-1:1999. Passenger cars - test track for a severe lane-change manoeuvre - Part 1: double lane-change. Geneva: International Organization for Standardization.
