The full equations of motion of the valvetrain of an internal combustion engine formulated by finite element techniques are solved by imposing the contact conditions. Velocity and acceleration constraints as well as displacement constraints are imposed on the contact points by an iterative scheme similar to the augmented Lagrangian multiplier method for stability of the solution. The valve spring is also modelled by employing rod elements, and surging with the coil collisions is computed by the contact conditions.
ChanCPasanoA PDynamic model of a fluctuating rocker-arm ratio cam systemTrans. ASME, J. Mech. Trans. Auto. Des., 1987, 109, 356–365.
2.
LeeJPattersonD JNonlinear valve train dynamics simulation with a distributed parameter model of valve springs, Trans. ASME, J. Engng for Gas Turb. and Power, 1997, 119, 692–698.
3.
MclaughlinSHaqueIDevelopment of a multi-body simulation model of a Winston Cup valvetrain to study valve bounceProc. Instn Mech. Engrs, Part K: J. Multi-body Dynamics, 2002, 216, 237–248.
4.
KushwahaMRahnejatHJinZ MValve-train dynamics: A simplified tribo-elasto-multi-body analysisProc. Instn Mech. Engrs, Part K: J. Multi-body Dynamics, 2000, 214, 95–110.
5.
KushwahaMRahnejatHTransient elastohydrodynamic lubrication of finite line conjunction of cam to follower concentrated contactJ. Phys., Part D, Appl. Phys., 2002, 35, 2872–2890.
6.
HamidzadehH RDehghaniMDynamic stability of flexible cam follower systemsProc. Instn Mech. Engrs, Part K: J. Multi-body Dynamics, 1999, 213, 45–52.
7.
LeeKAnalysis of dynamic contact between rotating spur gears by finite element and multi-body dynamics techniquesProc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science, 2001, 215, 423–435.
8.
ABAQUS Manual, Version 6.3, 2002 (ABAQUS Inc.).
9.
CrisfieldM ANon-linear Finite Element Analysis of Solids and Structures, 1997, Vol. 2, (John Wiley, Chichester).
