Fault diagnosis of a machine tool rotary axis based on a motor current test and the ensemble empirical mode decomposition method

Abstract

Faults frequently occur in the rotary axis of machine tools due to their complicated drive mechanism. The machining accuracy and life time span will decline when there is a fault in the machine tool. Hence, it is necessary to develop a method to detect faults efficiently. In this article, a fault diagnosis method of the rotary axis of a computer numerical control (CNC) machine tool based on servo motor current analysis is proposed. A two-degree-of-freedom dynamic model of worm and worm gear is used in this study to analyse the relationship between the current signal and the fault of the rotary axis of the CNC machine tool. The ensemble empirical mode decomposition method is used as a self-adaptive low-pass filter to extract valuable information from the current signal. A number of experiments are carried out on a CNC machine tool which is in a fault state to validate the presented method. The result shows that the current of the servo motor contains enough information to detect the fault state of the feed axis of the machine tool. After being calculated by the dynamic model, the current signal clearly reveals the fluctuation of stiffness of the teeth which is caused by the fault of the rotary axis.

Keywords

fault diagnosis computer numerical control machine tool rotary feed axis dynamic model servo motor current ensemble empirical mode decomposition

Get full access to this article

View all access options for this article.

References

Tsutsumi

Saito

Identification and compensation of systematic deviations particular to 5-axis machining centers. Int. J. Mach. Tools Manuf., 2003, 43(8), 771–780.

Kahraman

Singh

Nonlinear dynamics of a spur gear pair. J. Sound Vibr., 1990, 142(1), 49–75.

Wojnarowski

Onishchenko

Tooth wear effects on spur gear dynamics. Mech. Mach. Theory, 2003, 38(2), 161–178.

Liang

S. Y.

Hecker

R.L.

Landers

R. G.

Machining process monitoring and control: the state-of-the-art. J. Manuf. Sci. Engng, 2004, 126(2), 297–310.

Plapper

Weck

Sensorless machine tool condition monitoring based on open NCs. In Proceedings of the 2001 IEEE International Conference on Robotic and automation. Seoul, Korea, 2001, 3104–3108.

Jeong

Y.-H.

Cho

D.-W.

Estimating cutting force from rotating and stationary feed motor currents on a milling machine. Int. J. Mach. Tools Manuf., 2002, 42(14), 1559–1566.

Kim

G. D.

Chu

C. N.

Indirect cutting force measurement considering frictional behaviour in a machining centre using feed motor current. Int. J. Adv. Manuf. Technol., 1999, 15(7), 478–484.

Zhou

Y. Q.

Mei

X. S.

Jiang

G. D.

Sensorless evaluation for computer numerical control machine tool slide level using an empirical mode decomposition method. Proc. IMechE, Part C: J. Mechanical Engineering Science, 2010, 224(C3), DOI: 10.1243/ 09544062JMES1631, 721–730.

Staszewski

W. J.

Worden

Tomlinson

G. R.

Time–frequency analysis in gearbox fault detection using the Wigner–Ville distribution and pattern recognition. Mech. Syst. Signal Process., 1997, 11(5), 673–692.

10.

Meng

Rotating machinery fault diagnosis using Wigner distribution. Mech. Syst. Signal Process., 1991, 5(3), 155–166.

11.

Staszewski

W. J.

Wavelet based compression and feature selection for vibration analysis. J. Sound Vibr., 1998, 211(5), 735–760.

12.

Huang

N. E.

Shen

Long

S. R.

The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis. Proc. R. Soc. Lond., A, 1998, 454. 903–995.

13.

Yang

D. J.

Cheng

J. S.

A roller bearing fault diagnosis method based on EMD energy entropy and ANN. J. Sound Vibr., 2006, 294. 269–277.

14.

Zhu

Sun

Application of EMD and SVD in fault identification. IPEC, 2007, 2007. 1247–1250.

15.

Shulin

Haifeng

Hui

Application of improved EMD algorithm for the fault diagnosis of reciprocating pump valves with spring failure. In Proceedings of the 9th International Symposium on ISSPA 2007. Sharjah, 2007, 1–4.

16.

Diagnosis of subharmonic faults of large rotating machinery based on EMD. Mech. Syst. Signal Process., 2009, 23. 467–475.

17.

Loutridis

S. J.

Damage detection in gear systems using empirical mode decomposition. Eng. Struct., 2004, 26. 1833–1841.

18.

Huang

N. E.

Ensemble empirical mode decomposition a noise assisted data analysis method. Adv. Ada. Data Anal. (AADA) , 2009, 1. 1–41.

19.

Yaguo

Zhengjia

Yanyang

Application of the EEMD method to rotor fault diagnosis of rotating machinery. Mech. Syst. Signal Process, 2009, 23(4), 1327–1338.

20.

T. Y.

Chung

Y. L.

Misalignment diagnosis of rotating machinery through vibration analysis via the hybrid EEMD and EMD approach. Smart Mater. Struct., 2009, 18. 095004–095004.

21.

Cao

T.-F.

Zhang

C.-Y.

Study on the affection of gear fault diagnosis bases on HHT by noises. Fuzzy Inf. Eng., 2009, 2. 87–96.

22.

Flandrin

Rilling

Gonçalvés

Empirical mode decomposition as a filter bank. IEEE Signal Process. Lett., 2004, 11(2), 112–114.