To investigate the influence of the trailing edge shape of the impeller on the aerodynamic performance of the centrifugal compressor, four types of impellers with different trailing edge shapes were studied in this work. The internal flow and aerodynamic load distribution of the impellers were also analyzed. Results show that the Bezier, Ellipse, and Linear impellers can optimize the pressure distribution of the impeller, decrease the reverse pressure gradient, reduce the occurrence of internal flow separation and vortices in the trailing edge area, thereby increasing compressor efficiency. Especially noteworthy is the Linear impeller, which attains robust performance for the centrifugal compressor by notably bolstering work capacity under near-choking condition and extending operating flow range.
CullenDANeyerlinKCAhluwaliaRK, et al. New roads and challenges for fuel cells in heavy-duty transportation. Nat Energy2021; 6: 462–474. https://doi.org/10.1038/s41560-021-00775-z
2.
RenLZhouSPengT, et al. Greenhouse gas life cycle analysis of China’s fuel cell medium- and heavy-duty trucks under segmented usage scenarios and vehicle types. Energy2022; 249: 123628. https://doi.org/10.1016/j.energy.2022.123628
3.
JiaoYYuLWangJ. Diffusion of new energy vehicles under incentive policies of China: moderating role of market characteristic. J Clean Prod2022; 353: 131660. https://doi.org/10.1016/j.jclepro.2022.131660
4.
ChuXZhouDHLiuKN. Hydrogen fuel cell vehicles at home and abroad: development situation and future. Automot Pract Technol2019; 4: 8–10.
5.
GuoHSunSYuH, et al. Proton exchange membrane fuel cell subzero start-up with hydrogen catalytic reaction assistance. J Power Sources2019; 429: 180–187. https://doi.org/10.1016/j.jpowsour.2019.02.092
6.
YuWSichuanXNiH. Air compressors for fuel cell vehicles: an systematic review. SAE Int J Altern Powertrains2015; 04(1): 115–122. https://doi.org/10.4271/2015-01-1172
7.
BaoPLZhangDBXuSC, et al. Development status and trend of fuel cell vehicle air compressor. Power Supply Technol2016; 40(8): 1731–1734.
8.
LiYPeiPMaZ, et al. Analysis of air compression, progress of compressor and control for optimal energy efficiency in proton exchange membrane fuel cell. Sustain Energy Rev2020; 133: 110304. https://doi.org/10.1016/j.rser.2020.110304
9.
ZhaoDXuLHuangfuY, et al. Semi-physical modeling and control of a centrifugal compressor for the air feeding of a PEM fuel cell. Energy Convers Manag2017; 154: 380–386. https://doi.org/10.1016/j.enconman.2017.11.030
10.
YuYGeJChenYW, et al. Development trend of centrifugal air compressor at home and abroad. Combust Eng Access2020; 12: 122–123.
WanYGuanJXuS. Improved empirical parameters design method for centrifugal compressor in PEM fuel cell vehicle application. Int J Hydrogen Energy2017; 42(8): 5590–5605. https://doi.org/10.1016/j.ijhydene.2016.08.162
13.
SmithLHYehH. Sweep and dihedral effects in axial-flow turbomachinery. J Basic Eng1963; 85(3): 401–414. https://doi.org/10.1115/1.3656623
14.
HowardJHGAshrafizaadehM. A numerical investigation of blade lean angle effects on flow in a centrifugal impeller. In: Proceedings of ASME 1994 international gas turbine & aeroengine congress and exposition, The Hague, 1994, pp. 1–10.
15.
OhJBuckleyCWAgrawalGL. Numerical study on the effects of blade lean on high-pressure centrifugal impeller performance. In: Turbo expo: turbine technical conference and exposition, Vancouver, BC, Canada, 2011, Vol. 7, pp. 1957–1969. ASME.
16.
ZuoSGWeiKJWuXD, et al. Multi-objective parameter optimization of centrifugal compressor impeller using Kriging model. Trans Chinese Soc Agric Eng2016; 32(2): 77–83.
17.
EkradiKMadadiA. Performance improvement of a transonic centrifugal compressor impeller with splitter blade by three-dimensional optimization. Energy2020; 201: 117582. https://doi.org/10.1016/j.energy.2020.117582
18.
ZhanQZhangYMXuSC. Multi-parameter and multi-working condition optimization of fuel cell centrifugal air compressor impeller for vehicle. Automot Pract Technol2018; 24: 25–29.
19.
MouSZDuCJMouFY, et al. Topology optimization of continuum structure based on multi-island genetic algorithm. Mech Sci Technol Aero Eng2009; 10: 1316–1320.
20.
SongXGuZQZhangQL, et al. Optimization of turbulence model based on multi-island genetic algorithm. J Hunan Univ2011; 38(2): 23–29.
21.
WuYBaoHFuJ, et al. Review of recent developments in fuel cell centrifugal air compressor: comprehensive performance and testing techniques. Int J Hydrogen Energy2023; 48: 32039–32055. https://doi.org/10.1016/j.ijhydene.2023.04.262
22.
KimJHKimKY. Analysis and optimization of a vaned diffuser in a mixed flow pump to improve hydrodynamic performance. J Fluid Eng2012; 134(7): 071104. https://doi.org/10.1115/1.4006820
23.
HeskestadGOlbertsDR. Influence of trailing-edge geometry on hydraulic-turbine-blade vibration resulting from vortex excitation. J Eng Gas Turbine Power1960; 82(2): 103–109. https://doi.org/10.1115/1.3672718
24.
GaoBZhangNLiZ, et al. Influence of the blade trailing edge profile on the performance and unsteady pressure pulsations in a low specific speed centrifugal pump. J Fluid Eng2016; 138(5): 051106.
25.
YangZJiangHZhugeW, et al. Design of a partial discharge shrouded impeller for the centrifugal compressor of supercritical carbon dioxide power cycles. Energy2024; 307: 132713. https://doi.org/10.1016/j.energy.2024.132713
RoachePJ. Verification and validation in computational science and engineering. Hermosa Publishers, 1998.
28.
ASME V&V 20-2009. Standard for verification and validation in computational fluid dynamics and heat transfer. American Society of Mechanical Engineers, 2009.
29.
JamesonA. Time dependent calculations using multigrid, with applications to unsteady flows past airfoils and wings. In: Proceedings of the 10th computational fluid dynamics conference, Honolulu, USA, 1991.
30.
WangTYuHXiangR, et al. Performance and unsteady flow characteristic of forward-curved impeller with different blade inlet swept angles in a pump as turbine. Energy2023; 282: 128890. https://doi.org/10.1016/j.energy.2023.128890
31.
EckardtD. Detailed flow investigations within a high-speed centrifugal compressor impeller. J Fluid Eng1976; 98(3): 390–399. https://doi.org/10.1115/1.3448334
