The aim of this study was to develop a diagnostic algorithm for assessing the technical condition of the lubrication system in KAMAZ diesel engines based on the analysis of used oil parameters. Experimental measurements were conducted to determine discrepancies between the actual and permissible (according to technical documentation) oil levels, as well as statistical calculations to evaluate the diagnostic value of specific parameters. The findings revealed that the maximum permissible oil volume in the KAMAZ-740 engine exceeds the nominal level by 30%, and in the KAMAZ-EURO engine by 24%. Statistical analysis identified the most informative diagnostic parameters as oil volume, viscosity, total base number, and flash point. Using the permissible values of the identified indicators, schematic plots were developed, each reflecting the current oil condition and enabling the identification of complex and combined faults. The results led to the development of a diagnostic algorithm for diesel engine lubrication system evaluation and a finite state machine method to predict critical oil levels and prevent typical problems and critical engine breakdowns. The projected annual economic benefit from implementing the developed diagnostic system amounted to USD 144,000 for a fleet of 2000 vehicles, based on an average annual mileage of 60,000 km.
PolezhayevaISShevchenkoIIBekmanovaGU, et al. Problems and prospects of mechanical engineering development in Kazakhstan. Ind Technol Eng2022; 2: 22–31.
2.
YeSDaBQiL, et al. Condition monitoring of marine diesel lubrication system based on an optimized random singular value decomposition model. Machines2024; 13(1): 7.
3.
MohammedM.Application and evaluation of multi-sensor fusion technology in diesel engine oil analysis – a review. Polytechnic University of Turin, 2021.
4.
BiniyazovAZakharovVSadykovaL, et al. Improving the performance of automotive forced diesel engines by improving the control of oil volume in the lubrication system. J Chin Inst Eng2025; 48(4): 352–361.
5.
TemizerİEskiciB. Investigation on the combustion characteristics and lubrication of biodiesel and diesel fuel used in a diesel engine. Fuel2020; 278: 118363.
6.
LiSQiLShiJ, et al. Study on few-shot fault diagnosis method for marine fuel systems based on DT-SVIT-KNN. Sensors2024; 25(1): 6.
VentikosNPSotiralisPAnnetisE.A combined risk-based and condition monitoring approach: developing a dynamic model for the case of marine engine lubrication. Transp Saf Environ2022; 4(3): 020.
9.
GlazyrinSAVarlamovGBZhumagulovMG, et al. Improving the efficiency and environmental friendliness of diesel engines of mining dump trucks by installing hybrid gas-diesel fuel systems. In: MSariAKulachinskaya (eds) Digital transformation: what are the smart cities today?Springer, 2024, pp.295–303.
ASTM D445-24: Standard test method for kinematic viscosity of transparent and opaque liquids (and calculation of dynamic viscosity). https://store.astm.org/d0445-24.html (2024, accessed 13 January 2026).
14.
ASTM D2896-21: Standard test method for base number of petroleum products by potentiometric perchloric acid titration. https://store.astm.org/d2896-21.html (2021, accessed 13 January 2026).
15.
ASTM D93-20: Standard test methods for flash point by Pensky-Martens closed cup tester. https://store.astm.org/d0093-20.html (2025, accessed 13 January 2026).
16.
ISO 3675:1998. Crude petroleum and liquid petroleum products – laboratory determination of density – hydrometer method. https://www.iso.org/standard/26326.html (1998, accessed 13 January 2026).
ChuTNguyenTYooH, et al. A review of vibration analysis and its applications. Heliyon2024; 10(5): e26282.
21.
BleicherFBiermannDDrosselW-G, et al. Sensor and actuator integrated tooling systems. CIRP Ann2023; 72(2): 673–696.
22.
GhanbariAMazaheriK.Cylinder-piston application for surge prevention and energy efficiency in an industrial compression unit. Heliyon2024; 10(15): e35318.
23.
ZhangYMaZFengY, et al. The effects of ultra-low viscosity engine oil on mechanical efficiency and fuel economy. Energies2021; 14(8): 2320.
24.
SejkorováMHurtováIJilekP, et al. Study of the effect of physicochemical degradation and contamination of motor oils on their lubricity. Coatings2021; 11(1): 60.
25.
Al Sheikh OmarAMotamen SalehiFFarooqU, et al. Chemical and physical assessment of engine oils degradation and additive depletion by soot. Tribol Int2021; 160: 107054.
26.
WolakAZającGFijorekK, et al. Experimental investigation of the viscosity parameters ranges—case study of engine oils in the selected viscosity grade. Energies2020; 13(12): 3152.
27.
ÁlvarezALapuertaMAgudeloJR. Prediction of flash-point temperature of alcohol/biodiesel/diesel fuel blends. Ind Eng Chem Res2019; 58(16): 6860–6869.
28.
AbdelkhalikAElsayedHHassanM, et al. Using thermal analysis techniques for identifying the flash point temperatures of some lubricant and base oils. Egypt J Pet2018; 27(1): 131–136.
29.
AlvisoDSaabEClevenotP, et al. Flash point, kinematic viscosity and refractive index: variations and correlations of biodiesel–diesel blends. J Braz Soc Mech Sci Eng2020; 42: 347.
30.
RanjitPSAhmedZBhuratSS, et al. Comprehensive comparative study of the durability wear assessment of a diesel engine fuelled with jatropha seed oil and diesel fuel and its troubleshooting and scheduled maintenance. ACS Omega2024; 9(43): 43331–43352.
31.
HönigVProcházkaPObergruberM, et al. Determination of tractor engine oil change interval based on material properties. Materials2020; 13(23): 5403.
32.
AgocsABesserCBrennerJ, et al. Engine oils in the field: a comprehensive tribological assessment of engine oil degradation in a passenger car. Tribol Lett2022; 70(1): 28.
33.
CenHMorinaANevilleA.Effect of lubricant ageing on lubricants’ physical and chemical properties and tribological performance: part I: effect of lubricant chemistry. Ind Lubrication Tribol2018; 70(2): 385–392.
34.
GuptaJGAgarwalAK.Engine durability and lubricating oil tribology study of a biodiesel fuelled common rail direct injection medium-duty transportation diesel engine. Wear2021; 486-487: 204104.
35.
WeiLDuanHJinY, et al. Motor oil degradation during urban cycle road tests. Friction2021; 9: 1002–1011.
36.
YuJCaoCPanY.Advances of adsorption and filtration techniques in separating highly viscous crude oil/water mixtures. Adv Mater Interfaces2021; 8(16): 2100061.
37.
KaratuğÇArslanoğluY. Importance of early fault diagnosis for marine diesel engines: a case study on efficiency management and environment. Ships Offshore Struct2022; 17(2): 472–480.
38.
MusurmanovRUtaevSTuraevA.Theoretical background and results of a study on changes in oil alkalinity of diesel engines. IOP Conf Ser Earth Environ Sci2024; 1390: 012001.
39.
KurreSKPandeySKhatriN, et al. Study of lubricating oil degradation of CI engine fueled with diesel-ethanol blend. Tribol Ind2021; 43(2): 222–231.
40.
LiHLiYAnY, et al. Thermal load analysis of piston damaged by wall-wetting combustion in a heavy-duty diesel engine. Sustainability2023; 15(19): 14634.
41.
JungSPYuDH.Prediction of vehicle engine oil viscosity using OBDII signal. Int J Automot Technol2023; 24(2): 595–602.
42.
RahmanMHShahriarSMenezesPL.Recent progress of machine learning algorithms for the oil and lubricant industry. Lubricants2023; 11(7): 289.
43.
AgarwalAKAgarwalD.Field-testing of biodiesel (B100) and diesel-fueled vehicles: part 2—lubricating oil condition monitoring. J Energy Resour Technol2021; 143(4): 042308.
