Nitinol superelasticity is a crucial property for collapsible/expandable cardiovascular implants. The high class of risk associated with these devices requires an accurate mechanical characterisation as starting point for a reliable design methodology. Actual standards (ASTM-F2516) are based on standard metal testing and recommend the use of extensometers for the measurement of average nominal strains during tensile tests. However, measurement provided by classic extensometers may not be adequate to capture the strain evolution during the material phase transformation. These limitations can be overcome by full-field optical techniques such as Digital Image Correlation (DIC). This work presents a comprehensive comparison of various techniques for measuring strain on nitinol specimens. These include crosshead position, single and averaging (applied on both sides of the specimen) measurements using physical extensometers, virtual extensometer, and 1D and 2D DIC. Results are compared on the basis of the values determined for the upper/lower plateau stress, as defined by ASTM-F2516. Results show that the use of extensometers on nitinol strips subjected to tensile testing is inaccurate during phase transformation. Physical extensometers also introduce spurious local concentrated pressures at the knives contact region, which may alter the material stress plateaus values. DIC resulted more adequate to provide an accurate evaluation of strain localisation.
WadoodA.Brief overview on nitinol as biomaterial. Adv Mater Sci Eng2016; 2016: 1–9.
2.
LiuYXieZHumbeeckJV, et al. On the deformation of the twinned domain in NiTi shape memory alloys. Philos Mag A2000; 80(8): 1935–1953.
3.
FrostMSedlákPSedmákP, et al. SMA constitutive modeling backed up by 3D-XRD experiments: transformation front in stretched NiTi wire. Shape Mem Superelasticity2018; 4(4): 411–416.
4.
ShawJAKyriakidesS.On the nucleation and propagation of phase transformation fronts in a NiTi alloy. Acta Mater1997; 45(2): 683–700.
5.
SchlosserPFavierDLoucheH, et al. Experimental characterization of NiTi SMAs thermomechanical behaviour using temperature and strain full-field measurements. In: CIMTEC 2008 - Proceedings of the 3rd international conference on smart materials, structures and systems - state-of-the-art research and application of SMAs technologies, 2008;59:140–149.
6.
ZhengLHeYMoumniZ.Effects of Lüders-like bands on NiTi fatigue behaviors. Int J Solids Struct2016; 83: 28–44.
7.
ShariatBSLiYYangH, et al. Shear strain evolution during tension-induced Lüders-type deformation of polycrystalline NiTi plates. Mater Sci Eng A2022; 839: 142774.
8.
BrinsonLSchmidtILammeringR.Stress-induced transformation behavior of a polycrystalline NiTi shape memory alloy: micro and macromechanical investigations via in situ optical microscopy. J Mech Phys Solids2004; 52(7): 1549–1571.
9.
MachadoLGLagoudasDC.Thermomechanical constitutive modeling of SMAs. In: LagoudasDC (ed.) Shape memory alloys: modeling and engineering applications. Boston, MA: Springer US, 2008, pp. 121–187.
10.
MurasawaGKitamuraKYoneyamaS, et al. Macroscopic stress–strain curve, local strain band behavior and the texture of NiTi thin sheets. Smart Mater Struct2009; 18(5): 055003.
11.
SenolKCaoHTripathyS.Characterization and validation of fatigue strains for superelastic nitinol using digital image correlation. J Med Device2021; 15(4): 041005.
12.
BewerseCGallKRMcFarlandGJ, et al. Local and global strains and strain ratios in shape memory alloys using digital imagecorrelation. Mater Sci Eng A2013; 568: 134–142.
13.
DalySRavichandranGBhattacharyaK.Stress-induced martensitic phase transformation in thin sheets of nitinol. Acta Mater2007; 55(10): 3593–3600.
14.
TsimpoukisSKyriakidesS.Rate induced thermomechanical interactions in NiTi tensile tests on strips. J Mech Phys Solids2024; 184: 105530.
15.
XiaoRHouBSunQP, et al. An experimental investigation of the nucleation and the propagation of NiTi martensitic transformation front under impact loading. Int J Impact Eng2020; 140: 103559.
16.
XieXKanQKangG, et al. Observation on rate-dependent cyclic transformation domain of super-elastic NiTi shape memory alloy. Mater Sci Eng A2016; 671: 32–47.
17.
ZhangXFengPHeY, et al. Experimental study on rate dependence of macroscopic domain and stress hysteresis in NiTi shape memory alloy strips. Int J Mech Sci2010; 52(12): 1660–1670.
18.
ZhangYChaiXJuX, et al. Concentration of transformation-induced plasticity in pseudoelastic NiTi shape memory alloys: insight from austenite–martensite interface instability. Int J Plast2023; 160: 103481.
19.
XiaoYZengPLeiL, et al. Local mechanical response of superelastic NiTi shape-memory alloy under uniaxial loading. Shape Mem Superelasticity2015; 1(4): 468–478.
20.
XiaoYZengPLeiL, et al. In situ observation on temperature dependence of martensitic transformation and plastic deformation in superelastic NiTi shape memory alloy. Mater Des2017; 134: 111–120.
21.
KimKDalyS.Experimental studies of phase transformation in shape memory alloys. Conf Proc Soc Exp Mech Ser2012; 4: 267–269.
22.
MurasawaGYoneyamaSSakumaT, et al. Influence of cyclic loading on inhomogeneous deformation behavior arising in NiTi shape memory alloy plate. Mater Trans2006; 47(3): 780–786.
23.
BustosISoulHAlonsoG, et al. Heat source reconstruction and its relationship with functional fatigue of pseudoelastic NiTi ribbons. Shape Mem Superelasticity2023; 9: 156–175.
24.
ReedlunnBDalySHectorL, et al. Tips and tricks for characterizing shape memory wire part 5: Full-field strain measurement by digital image correlation. Exp Tech2013; 37(3): 62–78.
25.
XieXKanQKangG, et al. Observation on the transformation domains of super-elastic NiTi shape memory alloy and their evolutions during cyclic loading. Smart Mater Struct2016; 25(4): 045003.
26.
XiaoYJiangD.Effects of structural geometry on the localized deformation of superelastic NiTi sheets. Int J Solids Struct2022; 257: 111762.
27.
PetriniLMigliavaccaF.Biomedical applications of shape memory alloys. J Metall2011; 2011: 1–15.
28.
BozkurtSPreston-MaherGLToriiR, et al. Design, analysis and testing of a novel mitral valve for transcatheter implantation. Ann Biomed Eng2017; 45(8): 1852–1864.
29.
ASTM E8. ASTM E8/E8M standard test methods for tension testing of metallic materials 1. Annual Book of ASTM Standards 4. 2010;(C):1–27.
30.
ASTM F2516-14. ASTM F2516−14: standard test method for tension testing of nickel-titanium superelastic materials. 2015.
31.
ShawJKyriakidesS.Thermomechanical aspects of NiTi. J Mech Phys Solids1995; 43(8): 1243–1281.
32.
OrgéasLFavierD.Stress-induced martensitic transformation of a NiTi alloy in isothermal shear, tension and compression. Acta Mater1998; 46(15): 5579–5591.
33.
PrabhakaranRGallowayTL.Strain measurement in a shape memory alloy with strain gauges. Strain2005; 41(4): 177–184.
34.
DelpueyoDJuryABalandraudX, et al. Applying full-field measurement techniques for the thermomechanical characterization of shape memory alloys: a review and classification. Shape Mem Superelasticity2021; 7(4): 462–490.
35.
KimKDalyS.Martensite strain memory in the shape memory alloy nickel-titanium under mechanical cycling. Exp Mech2011; 51(4): 641–652.
36.
ZhangSHeY.Fatigue resistance of branching phase-transformation fronts in pseudoelastic NiTi polycrystalline strips. Int J Solids Struct2018; 135: 233–244.
37.
CatoorDMaZKumarS.Cyclic response and fatigue failure of Nitinol under tension–tension loading. J Mater Res2019; 34(20): 3504–3522.
38.
JiangDKyriakidesSLandisCM, et al. Modeling of propagation of phase transformation fronts in NiTi under uniaxial tension. Eur J Mech A/Solids2017; 64: 131–142.
39.
Di LeonardoSPitarresiGBurriesciG. Standard mechanical testing is inadequate for the mechanical characterisation of shape-memory alloys: source of errors and a new corrective approach. Mater Des2022; 216: 110538.
40.
BianXSalehAAPerelomaEV, et al. A digital image correlation study of a NiTi alloy subjected to monotonic uniaxial and cyclic loading-unloading in tension. Mater Sci Eng A2018; 726: 102–112.
41.
AhadiASarvariEFrenzelJ, et al. Size-dependent transformation patterns in NiTi tubes under tension and bending: Stereo digital image correlation experiments and modeling. J Mech Phys Solids2026; 206: 106413.
42.
PintoVCappelloRDi LeonardoS, et al. Evaluation of NiTi under low-amplitude cyclic loading by means of thermographic harmonic analysis. Mech Mater2025; 206: 105334.
43.
ZhengLHeYMoumniZ.Investigation on fatigue behaviors of NiTi polycrystalline strips under stress-controlled tension via in-situ macro-band observation. Int J Plast2017; 90: 116–145.
44.
WangZLuoJKuangW, et al. Strain rate effect on the thermomechanical behavior of NiTi shape memory alloys: a literature review. Metals2023; 13(1): 58.
45.
ASTM F2004-03. ASTM F2004-03 transformation temperature of nickel-titanium alloys by thermal analysis 1. ASTM International. 2018;05(Reapproved 2010):11–14.
46.
ElibolCWagnerMF.Virtual extensometer analysis of martensite band nucleation, growth, and strain softening in pseudoelastic NiTi subjected to different load cases. Materials2018; 11(8): 1458.
47.
PanBQianKXieH, et al. Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review. Meas Sci Technol2009; 20: 062001.
