Aimed at addressing the issues of cage instability and excessive skidding of cylindrical roller bearings under high-speed and light-load conditions. Dynamic Time Warping method was employed to quantitatively assess the stability of cage motion by calculating the similarity between the tracks of the cage mass center. Additionally, the effects of cage force and roller skidding on the whirling characteristics of the cage were analyzed under various whirling states. The findings indicate that the cage motion is most stable during local periodic whirling, followed by regular circular whirling. The force acting on the cage, which determines the whirling characteristics, varies across different whirling states. The rate of roller slip variation directly affects the normal force, subsequently influencing the whirling characteristics. By reducing the degree of bearing skidding, the collision force between the cage and the roller is lessened, thereby enhancing the stability of cage whirling.
WangMYanKLiuZ, et al. Transient collision behavior and cage instable whirling mechanism in ball bearings: modeling approach and properties investigation. Tribol Int2023; 185: 108497.
2.
CuiYDengSZhangW, et al. The impact of roller dynamic unbalance of high-speed cylindrical roller bearing on the cage nonlinear dynamic characteristics. Mech Mach Theory2017; 118(10): 65–83.
3.
TianJWangPXuH, et al. Nonlinear vibration characteristics of rolling bearing considering flexible cage fracture. Int J Non Linear Mech2023; 156: 104478.
4.
KingsburyEP.Torque variations in instrument ball bearings. Tribol Trans1965; 8(4): 435–441.
5.
KingsburyEWalkerR.Motions of an unstable retainer in an instrument ball bearing. J Tribol1994; 116(2): 202–208.
6.
SalamITauqirAUl HaqA, et al. An air crash due to fatigue failure of a ball bearing. Eng Fail Anal1998; 5(4): 261–269.
7.
TakabiJKhonsariMM.On the thermally induced failure of rolling element bearings. Tribol Int2016; 94: 661–674.
HoupertL.CAGEDYN: a contribution to roller bearing dynamic calculations part I: basic tribology concepts. Tribol Trans2009; 53(1): 1–9.
11.
WenBRenHZhangH, et al. Experimental investigation of cage motions in an angular contact ball bearing. Proc IMechE, Part J2017; 231(8): 1041–1055.
12.
GaoSHanQZhouN, et al. Experimental and theoretical approaches for determining cage motion dynamic characteristics of angular contact ball bearings considering whirling and overall skidding behaviors. Mech Syst Signal Process2021; 168: 108704.
13.
GuptaPK.Modeling of instabilities induced by cage clearances in cylindrical roller bearings. Tribol Trans1991; 34(1): 1–8.
14.
GhaisasNWassgrenCRSadeghiF.Cage instabilities in cylindrical roller bearings. J Tribol2004; 12(6): 681–689.
15.
YuanDWangRChenS, et al. Experimental research on cage motion with different pocket shapes in angular contact ball bearing. Proc IMechE, Part J2022; 236(7): 1325–1335.
16.
GaoSHanQZhouN, et al. Dynamic and wear characteristics of self-lubricating bearing cage: effects of cage pocket shape. Nonlinear Dyn2022; 110(1): 177–200.
17.
DengSZhuXQianD, et al. Nonlinear dynamic correlation between balls, cage and bearing rings of angular contact ball bearings at different number of balls and groove curvature radii. Nonlinear Dyn2023; 111(4): 3207–3237.
18.
DengSChangHQianD, et al. Nonlinear dynamic model of ball bearings with elastohydrodynamic lubrication and cage whirl motion, influences of structural sizes, and materials of cage. Nonlinear Dyn2022; 110(3): 2129–2163.
19.
NiuL.A simulation study on the effects of race surface waviness on cage dynamics in high-speed ball bearings. J Tribol2019; 141(5): 1–43.
20.
DengSZhuXQianD, et al. Nonlinear dynamic mechanisms of angular contact ball bearings with waviness and cage whirl motion. Nonlinear Dyn2022; 109(4): 2547–2571.
21.
ChoeBKwakWJeonD, et al. Experimental study on dynamic behavior of ball bearing cage in cryogenic environments, part II: Effects of cage mass imbalance. Mech Syst Signal Process2019; 116: 25–39.
22.
YuYGuoLChenZ, et al. Dynamics modelling and vibration characteristics of urban rail vehicle axle-box bearings with the cage crack. Mech Syst Signal Process2023; 205: 110870.
23.
ShiZLiuJLiH, et al. Dynamic simulation of a planet roller bearing considering the cage bridge crack. Eng Fail Anal2022; 131: 105849.
24.
NogiTManiwaKMatsuokaN.A dynamic analysis of cage instability in ball bearings. J Tribol2017; 140(1): 1–23.
25.
SchwarzSGrillenbergerHTremmelS, et al. Prediction of rolling bearing cage dynamics using dynamic simulations and machine learning algorithms. Tribol Trans2022; 65(2): 225–241.
26.
GuptaPK.Cage unbalance and wear in ball bearings. Wear1990; 147(1): 93–104.
27.
MeeksCRNgKO.The dynamics of ball separators in ball bearings-part I: analysis. Tribol Trans1985; 28(3): 277–287.
28.
MeeksCR.The dynamics of ball separators in ball bearings-part II: results of optimization study. Tribol Trans1985; 28(3): 288–295.
29.
YeZWangL.Effect of external loads on cage stability of high-speed ball bearings. Proc IMechE, Part J2015; 229(11): 1300–1318.
30.
NiuLCaoHHeZ, et al. An investigation on the occurrence of stable cage whirl motions in ball bearings based on dynamic simulations. Tribol Int2016; 103: 12–24.
31.
SelvarajAMarappanR.Experimental analysis of factors influencing the cage slip in cylindrical roller bearing. Int J Adv Manuf Technol 2011; 53(5–8): 635–644.
32.
NiuLCaoHHeZ, et al. A systematic study of ball passing frequencies based on dynamic modeling of rolling ball bearings with localized surface defects. J Sound Vib2015; 357: 207–232.
33.
LiHLiHLiuY, et al. Dynamic characteristics of ball bearing with flexible cage lintel and wear. Eng Fail Anal2020; 117: 104956.
34.
LiuYWangWQingT, et al. The effect of lubricant temperature on dynamic behavior in angular contact ball bearings. Mech Mach Theory2020; 149: 103832.
35.
ZhangJQiuMDongY, et al. Investigation on the Cage Whirl State of cylindrical roller bearings under high speed and light load. Machines2022; 10(9): 768.
36.
TakabiJKhonsariMM.On the influence of traction coefficient on the cage angular velocity in roller bearings. Tribol Trans2014; 57(5): 793–805.
37.
NiuLCaoHOHeZ.Dynamic modeling of rolling ball bearing with localized surface defects considering three dimensional motions and relative slippage. J Mech Eng2015; 51(19): 53–59.
38.
NicholsonBDGivanGDThompsonKL, et al. Assessment of bearing heat generation prediction by the program ADORE with respect to experimental results and SHABERTH predictions. In: Turbo expo: power for land, sea, and air, 2017, vol. 50770, p.V001T01A001. American Society of Mechanical Engineers.
39.
GuptaPK.Advanced dynamics of rolling elements. New York, NY: Springer-Verlag, 1984.
40.
AgarwalPKAvrahamRBKaplanH, et al. Computing the discrete Fréchet distance in subquadratic time. SIAM J Comput2014; 43(2): 429–449.
