Microstructural and wear properties of iron slag reinforced aluminum alloy (LM30) based composite prepared through a stir casting method

Abstract

Aluminum alloys are widely used in various industries due to their as low density, high strength-to-weight ratio, and good corrosion resistance. However, their wear resistance is often inadequate for certain applications. Utilization of industrial waste materials, such as iron slag, as reinforcement in aluminum alloy matrix composites offers a sustainable approach to material development and waste management. The utilization of industrial waste materials for aluminum alloy matrix composite fabrication offers a waste utilization to material development. The loading of this reinforcement varied from 0 to 15 wt.% and different particle size range (220-140, 140-70, and 70-0 µm). A microscopic analysis indicated that the iron slag particles are spread uniformly inside the metallic matrix. There is also a reduction in the size of primary silicon, as well as morphological changes (acicular to globular shape). The wear behavior was calculated using a pin-on-disk wear set up in accordance with ASTM G99 standard. The composites were employed to dry sliding wear test under various operating conditions such as applied pressure (0.2–1.4 MPa), and sliding distance (0–3000 m). The 15F composite outperformed all other composite samples in terms of wear rate under all working conditions. When compared to the base alloy, it demonstrated a remarkable 67% drop in steady state wear rate. The enhancements in wear performance for the 15F composite were attributed to the effects of Fe slag reinforcement. The inclusion of iron slag particles induced strong interfacial bonding between matrix and reinforcement particles improving the durability of the mechanical mixed layer developed during relative motion. Importantly, the wear rate parameters of the 15F composite were similar to those of the brake drum material used in commercial applications. This emphasizes the composite suitability for usage in a variety of automobile components.