At present, convolutional neural network (CNN) is widely applied to bearing fault diagnosis However, the diagnosis performance will descend under the strong noise condition in the real industrial environment. Therefore, a denoising method named non-local block wide kernel CNN (NLBWCNN) is proposed based on wide convolution kernel and non-local block. Additionally, the data in the mechanical fault state is less than that in the health state in actual industrial production, which leads to the data imbalance problem. However, the fault classifier based on CNN needs a large amount of balanced data to train. Otherwise, it will not be fully trained, and thus its generalization ability will be affected. As a result, a method called VAE-NLBWCNN (variational autoencoder and NLBWCNN) is proposed for diagnosing bearing faults. The method employs variational autoencoder balanced the fault data. And then, the NLBWCNN is utilized to denoise and classify the fault data. The proposed VAE-NLBWCNN method is validated on three bearing datasets. The comparative experiments demonstrate that the proposed method can effectively expand unbalanced data and achieve the best performance in various noise conditions.
XiongSZhouHHeS, et al. Fault diagnosis of a rolling bearing based on the wavelet packet transform and a deep residual network with lightweight multi-branch structure. Meas Sci Technol2021; 32: 085106.
2.
LiHZhangQQinX, et al. Raw vibration signal pattern recognition with automatic hyper-parameter-optimized convolutional neural network for bearing fault diagnosis. Proc IMechE, C: J Mechanical Engineering Science2020; 234: 343–360.
3.
YanSShaoHMinZ, et al. FGDAE: a new machinery anomaly detection method towards complex operating conditions. Reliab Eng Syst Saf2023; 236: 109319.
4.
ZhangXLiuSLiL, et al. Multiscale holospectrum convolutional neural network-based fault diagnosis of rolling bearings with variable operating conditions. Meas Sci Technol2021; 32: 105027.
5.
YangSZhengX. A novel bearing fault diagnosis method with feature selection and manifold embedded domain adaptation. Proc IMechE, C: J Mechanical Engineering Science2022; 236: 8185–8197.
6.
TangTHuTChenM, et al. A deep convolutional neural network approach with information fusion for bearing fault diagnosis under different working conditions. Proc IMechE, C: J Mechanical Engineering Science2020; 235: 1389–1400.
7.
ZhangXHuangTWuB, et al. Multi-model ensemble deep learning method for intelligent fault diagnosis with high-dimensional samples. Front Mech Eng2021; 16: 340–352.
8.
YangSWenYQiaoB, et al. Fault detection filter design for nonlinear singular systems with markovian jump parameters. IEEE Syst J2021; 15: 4168–4176.
9.
LiuJZhouKYangC, et al. Imbalanced fault diagnosis of rotating machinery using autoencoder-based SuperGraph feature learning. Front Mech Eng2021; 16: 829–839.
10.
ShaoHJiangHZhangH, et al. Rolling bearing fault feature learning using improved convolutional deep belief network with compressed sensing. Mech Syst Signal Process2018; 100: 743–765.
11.
LiuHZhouJZhengY, et al. Fault diagnosis of rolling bearings with recurrent neural network-based autoencoders. ISA Trans2018; 77: 167–178.
12.
YuJ-B. Evolutionary manifold regularized stacked denoising autoencoders for gearbox fault diagnosis. Knowl Based Syst2019; 178: 111–122.
13.
XuYLiZWangS, et al. A hybrid deep-learning model for fault diagnosis of rolling bearings. Measurement2021; 169: 108502.
14.
HuangRLiaoYZhangS, et al. Deep decoupling convolutional neural network for intelligent compound fault diagnosis. IEEE Access2018; 7: 1848–1858.
15.
ErenLInceTKiranyazS. A generic intelligent bearing fault diagnosis system using compact adaptive 1D CNN classifier. J Signal Process Syst2018; 91: 179–189.
16.
HuangDLiSQinN, et al. Fault diagnosis of high-speed train bogie based on the improved-CEEMDAN and 1-D CNN algorithms. IEEE Trans Instrum Meas2021; 70: 1–11.
17.
ZhaoBYuanQ. Improved generative adversarial network for vibration-based fault diagnosis with imbalanced data. Measurement2021; 169: 108522.
18.
LiuSJiangHWuZ, et al. Rolling bearing fault diagnosis using variational autoencoding generative adversarial networks with deep regret analysis. Measurement2021; 168: 108371.
19.
LongYZhouWLuoY. A fault diagnosis method based on one-dimensional data enhancement and convolutional neural network. Measurement2021; 180: 109532.
20.
LiangPDengCWuJ, et al. Intelligent fault diagnosis of rotating machinery via wavelet transform, generative adversarial nets and convolutional neural network. Measurement2020; 159: 107768.
21.
WangY-rSunG-dJinQ. Imbalanced sample fault diagnosis of rotating machinery using conditional variational auto-encoder generative adversarial network. Appl Soft Comput2020; 92: 106333.
22.
WuJ-LKashinathKAlbertA, et al. Enforcing statistical constraints in generative adversarial networks for modeling chaotic dynamical systems. J Comput Phys2020; 406: 109209.
23.
LiuJQuFHongX, et al. A small-sample wind turbine fault detection method with synthetic fault data using generative adversarial nets. IEEE Trans Industr Inform2019; 15: 3877–3888.
24.
YueG-dCuiX-sZouY-y, et al. A Bayesian wavelet packet denoising criterion for mechanical signal with non-Gaussian characteristic. Measurement2019; 138: 702–712.
25.
BondaAGYNandaBKJonnalagaddaS. Vibration signature based stability studies in internal turning with a wavelet denoising preprocessor. Measurement2020; 154: 107520.
26.
PaulRSenguptaAPathakRR. Wavelet based denoising technique for liquid level system. Measurement2013; 46: 1979–1994.
27.
QianLXuGTianW, et al. A novel hybrid EMD-based drift denoising method for a dynamically tuned gyroscope (DTG). Measurement2009; 42: 927–932.
28.
ZhangWLiCPengG, et al. A deep convolutional neural network with new training methods for bearing fault diagnosis under noisy environment and different working load. Mech Syst Signal Process2018; 100: 439–453.
29.
LuCWangZ-YQinW-L, et al. Fault diagnosis of rotary machinery components using a stacked denoising autoencoder-based health state identification. Signal Process2017; 130: 377–388.
30.
HanHWangHLiuZ, et al. Intelligent vibration signal denoising method based on non-local fully convolutional neural network for rolling bearings. ISA Trans2022; 122: 13–23.
WangXGirshickRGuptaA, et al. Non-local neural networks. In: 2018 IEEE/CVF conference on computer vision and pattern recognition, Salt Lake City, UT, USA, 2018, pp.7794–7803, IEEE.
33.
ZouLLiYXuF. An adversarial denoising convolutional neural network for fault diagnosis of rotating machinery under noisy environment and limited sample size case. Neurocomputing2020; 407: 105–120.
34.
SmithWARandallRB. Rolling element bearing diagnostics using the case Western reserve university data: a benchmark study. Mech Syst Signal Process2015; 64–65: 100–131.
35.
BaiXYanCYangH, et al. Adaptive hash retrieval with kernel based similarity. Pattern Recognit2018; 75: 136–148.
36.
GhoshAKulhariaVNamboodiriVP, et al. Multi-agent diverse generative adversarial networks. In: 2018 IEEE/CVF conference on computer vision and pattern recognition, Salt Lake City, UT, USA, 2018, pp.8513–8521, IEEE.
37.
YeJ. Cosine similarity measures for intuitionistic fuzzy sets and their applications. Math Comput Modell2011; 53: 91–97.
38.
FanJLiangR-Z. Stochastic learning of multi-instance dictionary for earth mover’s distance-based histogram comparison. Neural Comput Appl2016; 29: 733–743.
39.
LyAMarsmanMWagenmakersEJ. Analytic posteriors for Pearson’s correlation coefficient. Stat Neerl2017; 72: 4–13.
40.
LessmeierCKimothoJKZimmerD, et al. Condition monitoring of bearing damage in electromechanical drive systems by using motor current signals of electric motors: a benchmark data set for data-driven classification. PHM Society European Conference, Bilbao, Spain, 2016.
