Abstract
With the rapid development of the flexible electronics field, flexible pressure sensors are widely used inwearable devices, medical monitoring and other fields. However, it is still a huge challenge to design a sensor with highsensitivity, low cost and a simple manufacturing process. In this work, we report a flexible strain sensor based on discarded mask straps (MS) with a unique three-dimensional (3D) twist-like network structure. Multi-walled carbon nanotubes (MWCNTs)/carbon nanoparticles (CN)/MS composites were prepared by a simple dip-drying method and encapsulated using a medical Polyurethane (PU) film. It is founded that the fabricated MWCNTs/CN/MS/PU flexible strain sensor (MCMP-FSS) exhibits a high gauge factor (GF) of 13,928 and advanced performance with a large sensing range of 0%–72%. Moreover, good water-repellent harmony and various types of stimuli over 1000 cycles were obtained for the MCMP-FSS. Benefiting from the unique 3D twist-like network structure and the MWCNTs/CN synergistic conductive network, MCMP-FSS also has broad application prospects in the fields of human motion detection, encrypted communication, and natural human-robot interaction.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
