Adaptive gravity-balancing mechanism using adjustable spring for a 6-DoF serial cooperative manipulator

Abstract

Cumbersome high-power joint actuators are not suitable for lightweight cooperative manipulators, which require flexibility and high energy efficiency while maintaining moderate payload capacity. Thus, gravity compensation is proposed in this work to drive cooperative manipulators by small joint actuators. Most existing gravity compensation methods are focused on fixed load (i.e. dead-weight), while in this study, a variable-payload balanced 6-DoF (degrees of freedom) serial manipulator is realized by adaptive gravity-balancing mechanism. Since joint actuators can be small enough to withstand only joint friction and inertia, this manipulator is inherently safe for man-robot interaction. The adaptive gravity-balancing mechanism is composed of ZFL (zero-free length) springs with adjustable endpoints, which are actively adjusted by cable after payload changes. Three advantages of the proposed manipulator include: Firstly, balancing all joints affected by gravity by only one additional balancing motor; Secondly, the balancing mechanism can actively adapt to variable payloads; Finally, the adjustment of the balancing mechanism is independent of the manipulator’s pose. Through simulation, these three advantages have been verified, which provides a new scheme for the design of safe-interaction and energy-saving cooperative manipulators.

Keywords

Adaptive gravity balance energy-saving manipulator design safe-interaction zero-free length spring

Get full access to this article

View all access options for this article.

References

Heredia

Schlette

Kjaergaard

. Data-driven energy estimation of individual instructions in user-defined robot programs for collaborative robots. IEEE Robot Autom Lett 2021; 6(4): 6836–6843.

Lee

Yamada

Ichikawa

, et al. Safety-function design for the control system of a human-cooperative robot based on functional safety of hardware and software. IEEE/ASME Trans Mechatron 2014; 19(2): 719–729.

Briot

Arakelian

. A new energy-free gravity-compensation adaptive system for balancing of 4-DOF robot manipulators with variable payloads. The Fourteenth International Federation for the Promotion of Mechanism and Machine Science World Congress (2015 IFToMM World Congress), 2015.

Arakelian

. Gravity compensation in robotics. Adv Robot 2016; 30(2): 79–96.

Newman

Hogan

. Time optimal control of balanced manipulators. J Dyn Syst Meas Control 1989; 111: 187–193.

Gopalswamy

Gupta

Vidyasagar

. A new parallelogram linkage configuration for gravity compensation using torsional springs. In Proceedings 1992 IEEE international conference on robotics and automation, Nice, France, 12–14 May 1992, pp. 664–669.New York: IEEE.

Arezoo

Fard

. A symmetric cable-pulley based mechanism for gravity compensation of robotic manipulators: Static and dynamic analysis. Proc IMechE, Part C: J Mechanical Engineering Science 2022; 236(12): 6822–6834.

Rahman

Ramanathan

Seliktar

, et al. A simple technique to passively gravity-balance articulated mechanisms. J Mech Des 1995; 117: 655–658.

Kim

H-S

Song

J-B

. Multi-dof counterbalance mechanism for a service robot arm. IEEE/ASME Trans Mechatron 2014; 19(6): 1756–1763.

10.

Min

J-K

Kim

D-W

Song

J-B

. A wall-mounted robot arm equipped with a 4-DOF yaw-pitch-yaw-pitch counterbalance mechanism. IEEE Robot Autom Lett 2020; 5(3): 3768–3774.

11.

Endo

Yamada

Yajima

, et al. A weight compensation mechanism with a non-circular pulley and a spring: application to a parallel Four-Bar linkage arm. SICE J Control Meas Syst Integr 2010; 3(2): 130–136.

12.

Kim

H-S

Min

J-K

Song

J-B

. Multiple-degree-of-freedom counterbalance robot arm based on slider-crank mechanism and bevel gear units. IEEE Trans Robot 2016; 32(1): 230–235.

13.

Fahim

Fernandez

. Performance enhancement of robot arms through active counterbalancing. Int J Adv Manuf Technol 1988; 3(4): 63–72.

14.

Baradat

Arakelian

Briot

, et al. Design and prototyping of a new balancing mechanism for spatial parallel manipulators. J Mech Des 2008; 130(7): 072305.

15.

Lacasse

M-A

Lachance

Boisclair

, et al. On the design of a statically balanced serial robot using remote counterweights. In 2013 IEEE International Conference on Robotics and Automation, Karlsruhe, Germany, 2013, pp. 4189–4194. DOI: 10.1109/ICRA.2013.6631169.

16.

Spong

Hutchinson

Vidyasagar

. Robot modeling and control. New York: Wiley, 2006.

17.

Liu

, et al. ParaMaster: Design and experimental characterizations of a haptic device for surgical teleoperation. In 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), Boston, MA, USA, 2020, pp. 375–380. DOI: 10.1109/AIM43001.2020.9158897.

18.

Herder

. Energy-free systems. PhD Dissertation, Delft Univ. Technol., Delft, The Netherlands, 2001. pp.92–95.