Variable-density topology optimization and bending test of quasi-honeycomb sandwich structures

Abstract

The topology optimization is considered to enhance the strength, stiffness, and specific energy absorption of a quasi-honeycomb sandwich structure since it can achieve the optimal distribution of materials. However, the existing material interpolation models do not make the topology structure have good clarity and stability. In the present study, a novel variable-density topology optimization based on an improved interpolation model is developed for the design of a quasi-honeycomb core. The combined cells are circularly spreading outward from the geometric center of the design domain, and the wall thickness function of the equivalent cell (i.e. a simplified model of the combined cell) is established on the basis of relative density. The SR material interpolation model is modified by adding the minimum elastic modulus term, fitting the weighting and penalty factors, and adopting the volume constraint of Bi-directional Evolutionary Structural Optimization (BESO). The optimization is conducted to minimize the compliance of the quasi-honeycomb core, in which the relative densities of equivalent cells are chosen as the design variables due to the mapping between topology elements and equivalent cells. The three-dimensional (3D) geometric models of original and optimized quasi-honeycomb cores, upper face sheets, and lower face sheets are built using SolidWorks and printed on a 3D printer. The deflection, strain, bending stiffness, and energy absorption under different material retention rates, restraint positions, and face sheet thicknesses are investigated by three-point bending tests. It is found that the improved SR material interpolation model is efficient for suppressing the grid dependence and checkerboard, and the mechanical properties of optimized quasi-honeycomb sandwich structures are significantly enhanced in comparison with original structures, confirming that the developed method provides important guidance for designing and optimizing the quasi-honeycomb sandwich structure.

Keywords

Quasi-honeycomb sandwich structure variable-density core topology optimization material interpolation model three-point bending test

Get full access to this article

View all access options for this article.

References

Huang

Guo

. Mechanical properties of honeycomb composite sandwich structure with applications to precision machine tools. J Xi’an Jiaotong Univ 2019; 53(5): 123–131.

Wang

Shi

Ding

, et al. Crashworthiness of innovative hexagonal honeycomb-like structures subjected to out-of-plane compression. J Central South Univ 2020; 27(2): 621–628.

Teimouri

Mahbod

Asgari

. Topology-optimized hybrid solid-lattice structures for efficient mechanical performance. Structures 2021; 29: 549–560.

Sun

Tian

, et al. Design of high-bearing performance honeycomb-like sandwich structure based on topology optimization. Mach Des Res 2021; 37(1): 31–35.

Zhang

Yanagimoto

. Density-based topology optimization integrated with genetic algorithm for optimizing formability and bending stiffness of 3D printed CFRP core sandwich sheets. Compos B Eng 2021; 225: 109248.

Xiao

Liu

Zhang

, et al. Design of graded lattice sandwich structures by multiscale topology optimization. Comput Methods Appl Mech Eng 2021; 384: 113949.

Kang

Wang

. Structural topology optimization based on non-local Shepard interpolation of density field. Comput Methods Appl Mech Eng 2011; 200(49–52): 3515–3525.

Liu

Sun

Jing

, et al. A SR interpolation model for density method. Manuf Automat 2019; 41(4): 159–163.

Garcia-Lopez

Sanchez-Silva

Medaglia

, et al. A hybrid topology optimization methodology combining simulated annealing and SIMP. Comput Struct 2011; 89: 1512–1522.

10.

Yan

Zhang

, et al. A modified interpolation approach for topology optimization. Acta Mech Solida Sin 2015; 28(4): 420–430.

11.

Zhang

, et al. Double-SIMP method for gray-scale elements suppression in topology optimization. Trans Chin Soc Agric 2015; 46(11): 405–410.

12.

Allahdadian

Boroomand

. Topology optimization of planar frames under seismic loads induced by actual and artificial earthquake records. Eng Struct 2016; 115: 140–154.

13.

Chen

Zhao

Yuan

, et al. Study on the optimization of the distribution of absorbing material on a noise barrier. Acoust Aust 2018; 46(1): 119–130.

14.

Cui

Zhang

Yang

, et al. Multi-material proportional topology optimization based on the modified interpolation scheme. Eng Comput 2018; 34(2): 287–305.

15.

De Troya

MAS

Tortorelli

. Adaptive mesh refinement in stress-constrained topology optimization. Struct Multidiscipl Optim 2018; 58(6): 2369–2386.

16.

Qiao

Wang

Zhao

, et al. Topology optimization for lightweight cellular material and structure simultaneously by combining SIMP with BESO. J Mech Sci Technol 2019; 33(2): 729–739.

17.

Teimouri

Asgari

. Multi-objective BESO topology optimization for stiffness and frequency of continuum structures. Struct Eng Technol 2019; 72(2): 181–190.

18.

Jiao

Yang

. An improved guide-weight method without the sensitivity analysis. IEEE Access 2019; 7: 109208–109215.

19.

Zhang

Huang

. An improved multi-objective topology optimization model based on SIMP method for continuum structures including self-weight. Struct Multidiscipl Optim 2021; 63(1): 211–230.

20.

Kumar

. Topology optimization of stiff structures under self-weight for given volume using a smooth Heaviside function. Struct Multidiscipl Optim 2022; 65(4): 1–17.

21.

Ding

. A study on the crashworthiness of lotus like cellular thin-walled structure. MA Thesis, Hunan University, China, 2020.

22.

Wang

. Research on innovation design and mechanical properties of combinatorial and hierarchical quasi-honeycomb core structure. MA Thesis, China Three Gorges University, China, 2021.

23.

, et al. Mechanical performance analysis and optimization design of quasi-honeycomb sandwich structure. J Yanshan Univ 2021; 45(5): 402–408.

24.

Pan

, et al. Parameter analysis and optimization design of light-weight and high-strength honeycomb sandwich structure. Machinery 2021; 48(11): 1–9.

25.

Xing

Jing

Zhang

, et al. A non-uniform honeycomb design method based on topology optimization density mapping. J Comput Aided Des Comput Graph 2017; 29(4): 734–741.

26.

Zhang

Deng

, et al. Bending deformation and optimal design of gradient honeycomb stiffened panel. Mech Eng 2022; 44(4): 857–867.

27.

, et al. Mechanical performance of 3D-Printing plastic honeycomb sandwich structure. Fiber Compos 2016; 33(4): 13–17.

28.

Chen

Hao

Zhao

, et al. Flexural properties and failure mechanism of 3D-printed grid beetle elytron plates. Int J Mech Sci 2021; 210: 106737.