Stiffness control of an actuator is important to ensure stable contact motion and collision safety for human-robot integration tasks. The variable stiffness mechanism (VSM) is an important part of the variable stiffness actuator. We propose a novel reconfigurable rotational VSM that uses magnet springs and swing guide mechanisms in this paper. Magnet springs are used as elastic elements that are driven by the cable, and the initial stiffness of the mechanism can be regulated by adjusting the air gap distance between the magnets. The mathematical stiffness model of the VSM is developed, and the numerical calculation simulation and experiments are conducted to verify the feasibility of the proposed VSM.
HuangTHHuangHPKuanJY. Mechanism and control of continuous-state coupled elastic actuation. J Intell Robot Syst2014; 74(3–4): 571–587.
2.
SekiHKamiyaYHikizuM. SCARA type robot arm with mechanically adjustable compliant joints. In: IEEE conference on emerging technologies and factory automation, Prague, Czech Republic, 20–22 September 2006, pp.1175–1181. Piscataway, NJ: IEEE.
3.
ShaoYXZhangWXSuYJ, et al. Design and optimisation of load-adaptive actuator with variable stiffness for compact ankle exoskeleton. Mech Mach Theory2021; 161(104323): 1–17.
4.
MiglioreSABrownEADeWeerthSP. Biologically inspired joint stiffness control. In: IEEE international conference on robotics and automation, Barcelona, Spain, 2005, pp.4508–4513. Piscataway, NJ: IEEE.
5.
KajikawaS. Variable compliance mechanism for human-care robot arm. In: 33rd Annual conference of the IEEE industrial electronics, Taipei, Taiwan, 2007, pp. 2736–2741. Piscataway, NJ: IEEE.
6.
WangRJHuangHP. Active variable stiffness elastic actuator: Design and application for safe physical human-robot interaction. In: IEEE international conference on robotics and biomimetics, 2010, pp. 1417–1422. IEEE Computer Society Press.
7.
GaoXFLiXCZhaoCS, et al. Variable stiffness structural design of a dual-segment continuum manipulator with independent stiffness and angular position, Comput-Integr Manuf2021; 67: 102000.
8.
XiongJSunYXZhengJ, et al. Design and experiment of a SMA-based continuous-stiffness-adjustment torsional elastic component for variable stiffness actuators, Smart Mater Struct2021; 30(10): 105021.
9.
ManciniMGrioliGCatalanoMG, et al. Passive impedance control of a multi-DOF VSA CubeBot manipulator. In: IEEE conference on robotics and automation, 2012, pp.3335–3340. Piscataway, NJ: IEEE.
10.
WangWFuXYLiYM, et al. Design of variable stiffness actuator based on modified gear-rack mechanism. J Mech Robot2016; 8(6): 061008.
11.
LiuYWLiuXGYuanZQ, et al. Design and analysis of spring parallel variable stiffness actuator based on antagonistic principle. Mech Mach Theory2019; 140: 44–58.
12.
ZhangMFangLJSunF, et al. A novel wire-driven variable-stiffness joint based on a permanent magnetic mechanism. J Mech Robot2019; 11: 051001.
13.
LiZYBaiSP. A novel revolute joint of variable stiffness with reconfigurability. Mech Mach Theory2019; 133: 720–736.
14.
LiZYBaiSPMadsenO, et al. Design, modeling and testing of a compact variable stiffness mechanism for exoskeletons. Mech Mach Theory2020; 151: 103905.
15.
SongZBLanSBDaiJS. A new mechanical design method of compliant actuators with non-linear stiffness with preload deflection-torque profiles. Mech Mach Theory2019; 133: 164–178.
16.
NingYHHuangHLXuWF, et al. Design and Implementation of a novel variable stiffness actuator with cam-based relocation mechanism, J Mech Robot2021; 13: 021009.
GroothuisSSRusticelliGZucchelliA, et al. The variable stiffness actuator vsaUT-II: mechanical design, modeling, and identification. IEEE-ASME Trans Mechatron2014; 19(2): 589–597.
19.
KimBSSongJB. Design and control of a variable stiffness actuator based on adjustable moment arm. IEEE Trans Robot2012; 28(5): 1145–1151.
20.
LiuYWCuiSPSunYJ. Mechanical design and analysis of a novel variable stiffness actuator with symmetrical pivot adjustment. Front Mech Eng2021; 16: 711–725.
21.
SunJTGuoZZhangYB, et al. A novel design of serial variable stiffness actuator based on an Archimedean spiral relocation mechanism. IEEE-ASME Trans on Mechatron2018; 23(5): 2121–2131.
22.
JafariATsagarakisNGCaldwellDG. A novel intrinsically energy efficient actuator with adjustable stiffness (AwAS). IEEE-ASME Trans on Mechatron2013; 18(1): 355–365.
23.
ShaoYXZhangWXDingXL. Configuration synthesis of variable stiffness mechanism based on guide-bar mechanisms with length-adjustable links. Mech Mach Theory2021; 156: 104153.
24.
VuongNDLiRJChewCM, et al. A novel variable stiffness mechanism with linear spring characteristic for machining operations. Robotica2017; 35(7): 1627–1637.
25.
LiXZhuHYLinW, et al. Structure-controlled variable stiffness robotic joint based on multiple rotary flexure hinges. IEEE Trans Ind Electron2021; 68(12): 12452–12461.
26.
FangLJWangY. Study on the stiffness property of a variable stiffness joint using a leaf spring. Proc IMechE, Part C: J Mechanical Engineering Science2019; 233(3): 1021-1031.
27.
NaselliGARimassaLZoppiM, et al. A variable stiffness joint with superelastic material. Meccanica2017; 52(4–5): 781–793.
28.
QuXXCaoDXZhangS. Design and research of a variable stiffness compliant joint based on torsional spring. Journal of Mechanical Engineering2021; 57(13): 114–123.
29.
XuYPGuoKLiJF, et al. A novel rotational actuator with variable stiffness using s-shaped springs. IEEE-ASME Trans on Mechatron2021; 26(4): 2249–2260.
30.
SunJTGuoZSunDY, et al. Design, modeling and control of a novel compact, energy-efficient, and rotational serial variable stiffness actuator (SVSA-II). Mech Mach Theory2018; 130: 123–136.
