You are on the new improved site. You can view the old site in view-only mode here until June 27, 2026

Filter Results

Select search scope: search across all journals or within the current journal

Search this journal

Enter search terms…

Advanced search

/

About

About Sage
About Sage Journals
Privacy Policy
Terms of Use
Contact Us
Help

Information for

Authors
Editors
Librarians
Researchers
Reviewers
Frequently asked questions

Copyright © 2026 by Sage Publications.京ICP备09090397号-11

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Impact Factor: 1.7 / 5-Year Impact Factor: 1.9

Journal Homepage Submission guidelines

Restricted access

Research article

First published online 2022-8

A new approach to increase the environmental sustainability of the discharging process in the over-injection of conduits for bowden cables using automation

,

, [...], and

Volume 236, Issue 16

https://doi.org/10.1177/09544062221087547

Abstract

The industry of automotive components is highly competitive. Polymer injection, used to over-mould conduits, is used to produce the necessary connections between the end of the Bowden cables and the car parts where they need to be assembled. Depending on the vehicle or the use, there will be a different connection of the conduit. The industry continuously looks for greener and more sustainable solutions. This study presents a strategy to save energy in polymer over-injection moulding. The developed concept consists of replacing the previous moulding system by a custom automatic one, using two more compact injection machines and automation, allowing for increased productivity and sustainability, all while retaining operators’ jobs. An application of the novel methodology is presented, reporting an energy consumption reduction of about 80% and an increase of 12% in production rate. With this work, the benefits of automation for overcoming sustainability and productivity problems are highlighted. Furthermore, the developed strategy may be applied to other production processes, regarding the injection of small parts in large quantities for a variety of materials.

Keywords

polymer injection moulding energy reduction automation vs sustainability productivity cleaner production

Get full access to this article

View all access options for this article.

References

1.

Rashid

O

Low

KWQ

Pittman

JFT

. Mold cooling in thermoplastics injection molding: effectiveness and energy efficiency. J Clean Prod 2020; 264: 121375, DOI: 10.1016/j.jclepro.2020.121375.

. All electric injection molding machines: how much energy can you save? 30th Ind Energ Tech Conf 2008; 1–12, http://txspace.di.tamu.edu/handle/1969.1/87974.

3.

Cardeal

GNA

. Energy Consumption Modelling in the Injection Moulding Industry. MSc. Thesis, Department of Mechanical Engineering, Instituto Superior Técnico, Universidade Nova de Lisboa, 2016. Available at: https://fenix.tecnico.ulisboa.pt/downloadFile/1407770020545302/70375_Resumo.pdf.

4.

Lu

N-Y

Gong

G-X

Yang

Y

, et al. Multi-objective process parameter optimization for energy saving in injection molding process. J Zhejiang Univ SCIENCE A 2012; 13(5): 382–394, DOI: 10.1631/jzus.A1100250.

, et al. Energy performance evaluation and improvement of unit-manufacturing processes: injection molding case study. J Clean Prod 2015; 105: 157–170, DOI: 10.1016/j.jclepro.2014.09.060 .

. Optimization of injection molding process for car fender in consideration of energy efficiency and product quality. J Comput Des Eng 2014; 1(4): 256–265, DOI: 10.7315/jcde.2014.025 .

. The use of variable speed drives to retrofit hydraulic injection molding machines. Energ Eng 1998; 95(1): 55–76, DOI: 10.1080/01998595.1998.10530408 .

. The promise of all-electric injection molding machines: a promise kept? Proc ACEEE Summer Study Energ Efficiency Industry 2005; 1: 155–166.

. Energy monitoring of plastic injection molding process running with hydraulic injection molding machines. J Clean Prod 2017; 148: 804–810, DOI: 10.1016/j.jclepro.2017.02.053 .

, et al. Environmental impact analysis of the injection molding process: analysis of the processing of high-density polyethylene parts. J Clean Prod 2015; 108: 80–89, DOI: 10.1016/j.jclepro.2015.07.119 .

, et al. Energy efficiency benchmarking for injection moulding processes. Robotics and Computer-Integrated Manufacturing 2015; 36: 45–59, DOI: 10.1016/j.rcim.2014.12.010 .

. An environmental analysis of injection molding. IEEE Int Symp Electro Environ 2006; 1: 195–200, DOI: 10.1109/ISEE.2006.1650060 .

, et al. Transition towards sustainable material innovation: evidence and evaluation of the flemish case. J Clean Prod 2013; 56: 63–72, DOI: 10.1016/j.jclepro.2012.01.023 .

. Strategic response to pollution taxes in supply chain networks: dynamic, spatial, and organizational dimensions. Eur J Oper Res 2013; 231(2): 314–327, DOI: 10.1016/j.ejor.2013.05.036 .

. The impact of greening on supply chain design and cost: a case for a developing region. J Transport Geogr 2012; 22: 118–128, DOI: 10.1016/j.jtrangeo.2011.12.007 .

. A multicriteria decision making model for reverse logistics using analytical hierarchy process. Omega 2011; 39(5): 558–573, DOI: 10.1016/j.omega.2010.12.002 .

. A goal programming model for paper recycling system☆. Omega 2008; 36(3): 405–417, DOI: 10.1016/j.omega.2006.04.014 .

. Integrating sustainability into supplier selection with grey system and rough set methodologies. Int J Prod Econ 2010; 124(1): 252–264, DOI: 10.1016/j.ijpe.2009.11.023 .

. Sustainable supply management: an empirical study. Int J Prod Econ 2012; 140(1): 168–182, DOI: 10.1016/j.ijpe.2011.04.007 .

. Global population growth and industrial impact on the environment. In: Cleaner Production-Toward a better future. . Switzzerland: Springer Nature; 2020, pp. 33–75.

, et al. Sustainable supply chain network design: an optimization-oriented review. Omega 2015; 54: 11–32, DOI: 10.1016/j.omega.2015.01.006 .

. From energy efficiency towards resource efficiency within the ecodesign directive. J Clean Prod 2017; 144: 358–374, DOI: 10.1016/j.jclepro.2016.12.144 .

Monteiro de Carvalho

. From 50 to 1: integrating literature toward a systemic ecodesign model. J Clean Prod 2015; 96(9): 44–57, DOI: 10.1016/j.jclepro.2014.07.036 .

. Industry attitudes towards ecodesign standards for improved resource efficiency. J Clean Prod 2015; 123: 155–166, DOI: 10.1016/j.jclepro.2015.12.035 .

. Definitions and terminology. In: Handbook of Recycling, State-of-the-art for Practitioners, Analysts and Scientists. . Amsterdam, The Netherlands: Elsevier; 2014, pp. 9–16.

. Development of an evaluation tool for engineering sustainable recycling pathways. Proced CIRP 2018; 69: 781–786, DOI: 10.1016/j.procir.2017.11.023 .

. Conceptualizing the circular economy: an analysis of 114 definitions. Resour Conservation Recycling 2017; 127: 221–232, DOI: 10.1016/j.resconrec.2017.09.005 .

. A complete guide to the evaluation, selection, and use of sustainable construction materials. In: Materials for Sustainable Sites. Hoboken, NJ, USA: Wiley; 2008.

. Cleaner Production Tools and Environmental Management Practices. In: Cleaner Production - Toward a better future. Switzerland: Springer Nature; 2020, pp. 143–245.

. Reducing energy consumption of a raw mill in cement industry. Energy 2012; 42(1): 261–269, DOI: 10.1016/j.energy.2012.03.060 .

. Energy consumption and energy saving potential in clothing industry. Energy 2018; 159: 74–85, DOI: 10.1016/j.energy.2018.06.128 .

Bollinger . Cradle-to-cradle design: creating healthy emissions-a strategy for eco-effective product and system design. J Clean Prod 2007; 15(13–14): 1337–1348, DOI: 10.1016/j.jclepro.2006.08.003 .

, et al. Characterization of the specific energy consumption of electricity in the portuguese sausage industry. WIT Trans Ecol Environ 2014; 186: 763–774, DOI: 10.2495/ESUS140681 .

, et al. Industrial oven improvement for energy reduction and enhanced process performance. Clean Tech Environ Pol 2017; 19(1): 215–224, DOI: 10.1007/s10098-016-1206-z .

, et al. Energy-saving Effect of integrated cooling unit with rotary booster and compressor for data center. Int J Refrigeration 2020; 119: 366–375, DOI: 10.1016/j.ijrefrig.2020.04.015 .

, et al. Characterization of cooling loads in the wine industry and novel seasonal indicator for reliable assessment of energy saving through retrofit of chillers. Appl Energ 2020; 266: 114856, DOI: 10.1016/j.apenergy.2020.114856 .

, et al. An economic viability analysis on energy-saving solutions for wireless access networks. Comp Commun 2016; 75: 50–61, DOI: 10.1016/j.comcom.2015.10.005 .

, et al. Comparative study about heating systems for pultrusion process. Composites B: Eng 2012; 43(4): 1823–1829, DOI: 10.1016/j.compositesb.2012.01.057 .

, et al. Optimising the energy consumption on pultrusion process. Composites Part B: Eng 2014; 57: 13–20, DOI: 10.1016/j.compositesb.2013.09.035 .

. A systematic literature review on machine tool energy consumption. J Clean Prod 2020; 275: 123125, DOI: 10.1016/j.jclepro.2020.123125 .

, et al. A Novel Automated System for the Handling of Car Seat Wires on Plastic Over-Injection Molding Machines. Machines 2021; 9: 141, DOI: 10.3390/machines9080141 .

, et al. How to solve qua-lity problems by advanced fully-automated manufacturing systems. Int J Adv Manufacturing Tech 2018; 94(9–12): 3041–3063, DOI: 10.1007/s00170-017-0158-8 .

. Increasing flexibility and productivity in small assembly operations: a case study. In: Advances in Sustainable and Competitive Manufacturing Systems. Lecture Notes in Mechanical Engineering. Heidelberg, Germany: Springer; 2013, pp. 329–340, DOI: 10.1007/978-3-319-00557-7 .

. A novel concept of agile assembly machine for sets applied in the automotive industry. Int J Adv Manufacturing Tech 2017; 91(9–12): 4043–4054, DOI: 10.1007/s00170-017-0109-4 .

, et al. The improvement of an APEX machine involved in the tire manufacturing process. Proced Manufacturing 2018; 17: 571–578, DOI: 10.1016/j.promfg.2018.10.098 .

Browse journal

Current issue OnlineFirst All issues

Similar articles

Free access

Application of the Taguchi method for consistent polymer melt production in injection moulding

Free access

Use of non-invasive measurement methods to aid the control of part quality in the injection moulding process

Free access

Manufacture of production injection mould tooling incorporating conformal cooling channels via indirect selective laser sintering

Free access

Microinjection moulding: The influence of runner systems on flow behaviour and melt fill of multiple microcavities