A new 3T1R parallel manipulator (PM) 2PPaRR-2PPaRU with rotational pitch motion is proposed in this paper. In such a mechanism, there are four limbs connected to the moving platform (MP) through several revolute joints and universal joints, and all actuated joints are prismatic joints with an axis along a vertical direction. Mobility and motion characteristics are verified by constraint screw theory. The inverse kinematic solutions and the singularity configurations are derived through kinematic analysis. Next, the workspace analysis and the connection between and the volume of the reachable workspace are performed. The local motion/force transmission index is selected to evaluate the local transmission performance of 2PPaRR-2PPaRU PM. Finally, the global motion/force transmission index and the volume of reachable workspace are considered simultaneously to optimize the structural parameters. The 2PPaRR-2PPaRU PM with improved local transmission performance and reachable workspace has been achieved after optimization.
AngelesJCaroSKhanW, et al.Kinetostatic design of an innovative schönflies-motion generator, Proc Inst Mech Eng C J Mech Eng Sci2006; 220(7): 935–943.
5.
Al-WidyanKAngelesJ. The robust design of Schoenflies-motion generators. In: LenarcicJGallettiC (eds). On advances in robot kinematic. Dordrecht, The Netherlands: Kluwer Academic Publisher; 2004, pp. 339–350.
6.
AnglesJCaroSKhanW, et al.Kinetostatic design of an innovative Schonflies-motion generator. Proc Inst Mech Eng C: J Mech Eng Sci2006; 220(7): 935–943.
7.
HuangZLiQC. Type synthesis of symmetrical lower mobility parallel mechanisms using the constraint-synthesis method. Int J Rob Res2003; 22(1): 59–79.
8.
YangTLLiuAShenH, et al.Topological structural synthesis of 3T-1R parallel mechanism based on POC equations. J Mech Eng2017; 53(021): 54–64.
9.
ClavelR.. Delta, a fast robot with parallel geometry. In: Proceedings 18th international symposium on industrial robots, Lausanne, Switzerland, 26-28 April 1988: 1988: 91–100.
10.
PowellD. Delta-4: a generic architecture for dependable distributed computing. 1st ed.Berlin: Springer Berlin Heidelberg, 1991, pp. 9–29.
11.
CorbelDGouttefardeMCompanyO, et al.Actuation redundancy as a way to improve the acceleration capabilities of 3T and 3T1R pick-and-place parallel manipulators. ASME J Mech Rob2010; 2(4): 041002.
12.
KrutSBenoitMOtaH, et al.I4: a new parallel mechanism for Scara motions, 2003. In: IEEE Int Conf Robot Automation (Cat, No.03CH37422), Taipei, Taiwan, 2003: 1875–1880.
13.
NabatVCompanyOKrutS, et al., 2005, Par4: very high speed parallel robot for pick-and-place. In: IEEE/RSJ international conference on intelligent robots and systems, Edmonton, AB, Canada, 2-6 August 2005: 2005: 553–558.
14.
XieFLiTLiuX. Type synthesis of 4-dof parallel kinematic mechanisms based on Grassmann line geometry and atlas method, Chin. J Mech Eng2013; 26(6): 1073–1081.
15.
WuG. Kinematic analysis and optimal design of a wall-mounted four-limb parallel schnflies-motion robot for pick-and-place operations. J Intell Robot Syst2017; 85(3–4): 663–677.
16.
LiZLouYZhangY, et al.Type synthesis, kinematic analysis, and optimal design of a novel class of schonflies-motion parallel manipulators. IEEE Trans Automation Sci Eng2013; 10(3): 674–686.
17.
WuCYangGChenCY, et al.Kinematic design of a novel 4-DOF parallel manipulator. In: IEEE international conference on robotics & automation, Singapore, 29 May-3 June 2017: 6099–6104.
18.
XieFLiuXJ. Analysis of the kinematic characteristics of a high-speed parallel robot with Schönflies-motion: mobility, kinematics, and singularity. Front Mech Eng2016; 11(2): 135–143.
19.
XieFLiuX-J. Design and development of a high-speed and high-rotation robot with four identical arms and a single platform. J Mech Robot2015; 7(4): 41015.
20.
SalgadoOAltuzarraOAmezuaE, et al.A parallelogram-based parallel manipulator for schönflies motion. J Mech Des2006; 129(12): 1243–1250.
21.
KimSMKimWYiBJ. Kinematic analysis and design of a new 3T1R 4-DOF parallel mechanism with rotational pitch motion. In: IEEE/RSJ international conference on intelligent robots and systems, St. Louis, MO, USA, 10-15 October 2009: 5167–5172.
22.
MalekpourMKavianyFFesharakifardR, et al.Kinematic analysis and optimal design of a new 3T1R parallel mechanism. In: International conference on robotics and mechatronics (ICRoM), Tehran, Iran, 20-21 November 2019: 20–21.
23.
KucukS. Dexterous workspace optimization for a new hybrid parallel robot manipulator. J Mech Robotics2018; 10(6).
24.
WuCYangGChenCY, et al.Kinematic design of a novel 4-DOF parallel manipulator. In: IEEE international conference on robotics & automation, Singapore, 29 May-3 June 2017, IEEE: 2017: 6099–6104.
25.
WuCYangGChenC Y, et al.Kinematic and performance analysis of a 4-DOF 2PPPaR parallel manipulator. J Mech Eng2018; 54(3): 36–45.
26.
ZarkandiS. Kinematic analysis and workspace optimization of a novel 4RPSP+PSparallel manipulator. Mech Based Des Structures Machines2021; 49(1): 131–153.
27.
ChengGYuJ-LGeS-R, et al.Workspace analysis of 3SPS+1PS bionic parallel test platform for hip joint simulator. Proc Inst Mech Eng Part C: J Mech Eng Sci2011; 225(9): 2216–2231.
28.
ZarkandiS. Kinematics, workspace and optimal design of a novel 4RSS+PSparallel manipulator. J Braz Soc Mech Sci Eng2019; 41(11): 1–17.
29.
ValeroFDíaz-RodríguezMVallésM, et al.Reconfiguration of a parallel kinematic manipulator with 2T2R motions for avoiding singularities through minimizing actuator forces. Mechatronics2020; 69: 102382.
30.
GanDDaiJSDiasJ, et al.Singularity-free workspace aimed optimal design of a 2T2R parallel mechanism for automated fiber placement. ASME J Mech Robotics2015; 7(4): 041022.
31.
StoughtonRSAraiTA modified Stewart platform manipulator with improved dexterity. IEEE Trans Robot Automation1993; 9(2): 166–173.
32.
AngelesJLópez-CajúnCS. Kinematic isotropy and the conditioning index of serial robotic manipulators. The Int J Robot Res1992; 11(6): 560–571.
33.
MerletJ. Jacobian, manipulability, condition number and accuracy of parallel robots. J Mech Des2006; 128(128): 199–206.
34.
LiuXJChaoWWangJ. A new index for the performance evaluation of parallel manipulators: a study on planar parallel manipulators. In: World congress on intelligent control and automation intelligent control and automation, Chongqing, China, 25-27 June 2008: 353–357.
35.
LiuXJWuCWangJ. A new approach for singularity analysis and closeness measurement to singularities of parallel manipulators. J Mech Robot2012; 4(4): 041001.
36.
WuCLiuXJWangL, et al.Optimal design of spherical 5R parallel manipulators considering the motion/force transmissibility. J Mech Des2010; 132(3): 031002.
37.
WangJWuCLiuX-J. Performance evaluation of parallel manipulators: motion/force transmissibility and its index. Mech Machi Theor2010; 45(10): 1462–1476.
38.
KucukSGungorBD. Inverse kinematics solution of a new hybrid robot manipulator proposed for medical purposes. In: 2016 medical technologies national congress, Antalya, Turkey, 27-29 October 2016, IEEE: 2017: 1–4.
39.
GaoXSLeiDLiaoQ, et al.Generalized Stewart-Gough platforms and their direct kinematics. IEEE Trans Robot2005; 21(2): 141–151.
40.
TozMKucukS. Dimensional optimization of 6-DOF 3-CCC type asymmetric parallel manipulator. Adv Robot2014; 28(9): 625–637.
41.
TozMKucukS. Dexterous workspace optimization of an asymmetric six-degree of freedom Stewart–Gough platform type manipulator. Robot Autonomous Syst2013; 61: 1516–1528.
42.
HuangZLiQC. Type synthesis of symmetrical lower-mobility parallel mechanisms using the constraint-synthesis method. Int J Rob Res; 22(1): 59–79.
43.
GosselinCAngelesJ. Singularity analysis of closed-loop kinematic chains. IEEE Trans Robot Automation1990; 6(3): 281–290.
44.
ZlatanovDBonevIAGosselinCM. Constraint singularities of parallel mechanisms. In: Proceedings 2002 IEEE international conference on robotics and automation, Washington, DC, USA, 11-15 May 2002, ICRA: 2002: 496–502.
45.
YuJLiuXDingX. Mathematic foundation of mechanisms and robotics. 2nd ed. Beijing: Higher Education Press, 2018, p. 201.
