Biodiesel is relatively higher corrosive compared to Diesel; consequently, the concern of viability is now a foremost issue. The biodiesel is self-oxidative in the environment; thus, its characteristics might be changed as fuel. The current work investigates the behavior of numerous biodiesel corresponding to corrosion when exposed to the surface of metal coupons. A gas chromatography mass spectrometry (GC-MS) was performed on eight biodiesel and a hypothesis was proposed to corroborate the hypothesis; static immersion tests, scanning electron microscopic (SEM) and surface roughness analysis were conducted. The immersion test was conducted for 150 days at ambient temperature conditions; later on, the corrosion rate of metals was examined. Results indicate that the Bronze has a maximum corrosion rate of 0.0674 mpy with Karanja biodiesel, followed by palm biodiesel. The Karanja biodiesel has the highest susceptibility to corrosion with all metals, while the Diesel is found to be the lowest with intermediate values for Rapeseed and Castor.
AbbaszaadehAGhobadianBOmidkhahMR, et al.
Current biodiesel production technologies: a comparative review. Energy Convers Manage2012;
63: 138–148.
2.
SongJYangWHiganoY, et al.
Introducing renewable energy and industrial restructuring to reduce GHG emission: application of a dynamic simulation model. Energy Convers Manage2015;
96: 625–636.
3.
LuoZZhaoJYaoR, et al.
Energy-based sustainability assessment of different energy options for green buildings. Energy Convers Manage2015;
100: 97–102.
4.
MosarofMHKalamMAMasjukiHH, et al.
Implementation of palm biodiesel based on economic aspects, performance, emission, and wear characteristics. Energy Convers Manage2015;
105: 617–629.
5.
GulzarMMasjukiHHKalamMA, et al.
Oil filter modification for biodiesel-fueled engine: a pathway to lubricant sustainability and exhaust emissions reduction. Energy Convers Manage2015;
91: 168–175.
6.
FazalMHaseebAMasjukiH.A critical review on the tribological compatibility of automotive materials in palm biodiesel. Energy Convers Manage2014;
79: 180–186.
7.
AshrafulAMMasjukiHHKalamMA, et al.
Influence of anti-corrosion additive on the performance, emission and engine component wear characteristics of an IDI diesel engine fueled with palm biodiesel. Energy Convers Manage2014;
87: 48–57.
8.
ZuletaECBaenaLRiosLA, et al.
The oxidative stability of biodiesel and its impact on the deterioration of metallic and polymeric materials: a review. J Braz Chem Soc2012;
23: 2159–2175.
9.
AgarwalAKKhuranaDDharA.Improving oxidation stability of biodiesels derived from karanja, neem and jatropha: step forward in the direction of commercialization. J Clean Prod2015;
107: 646–652.
10.
FazalMAJakeriaMRHaseebASMA, et al.
Effect of antioxidants on the stability and corrosiveness of palm biodiesel upon exposure of different metals. Energy2017;
135: 220–226.
11.
SilvaWLGSalomaoAAVilaMMDC, et al.
Influence of water and ultraviolet irradiation on the induction period of the oxidation of biodiesel. J Braz Chem Soc2017;
28: 676–680.
12.
SchaichKM.In Bailey’s industrial oil and fat products.
New York:
Wiley-Interscience, 2005, p.6.
13.
FazalMAHaseebASMAMasjukiH.Effect of temperature on the corrosion behavior of mild steel upon exposure to palm biodiesel. Energy2011;
36: 3328–3334.
14.
SalaheldeenMArouaMKMariodAA, et al.
Physicochemical characterization and thermal behavior of biodiesel and biodiesel–diesel blends derived from crude Moringa peregrina seed oil. Energy Convers Management2015;
92: 535–542.
15.
HaseebASiaSFazalM, et al.
Effect of temperature on tribological properties of palm biodiesel. Energy2010;
35: 1460–1464.
16.
SørensenGPedersenDVNørgaardAK, et al.
Microbial growth studies in biodiesel blends. Bioresour Technol2011;
102: 5259–5264.
17.
HaseebASMAMasjukiHAnnL, et al.
Corrosion characteristics of copper and leaded bronze in palm biodiesel. Fuel Process Technol2010;
91: 329–334.
18.
FazalMAHaseebAMasjukiH.Degradation of automotive materials in palm biodiesel. Energy2012;
40: 76–83.
19.
HuEXuYHuX, et al.
Corrosion behaviors of metals in biodiesel from rapeseed oil and methanol. Renew Energy2012;
37: 371–378.
20.
KennethPCromickMRChandlerK, et al. Operating experience and teardown Analysis for engines operated on biodiesel blends (B20). SAE International 2005-01-3641, 2006.
21.
GellerDPAdamsTTGoodrumJW, et al.
Storage stability of poultry fat and diesel fuel mixtures: specific gravity and viscosity. Fuel2008;
87: 92–102.
22.
SgroiMBollitoGSaraccoG, et al.
BIOFEAT: Biodiesel fuel processor for a vehicle fuel cell auxiliary power unit – study of the feed system. J Power Sources2005;
149: 8–14.
23.
TsuchiyaTShiotaniHGotoS, et al. Maeda, Japanese standards for diesel fuel containing 5% fame blended diesel fuels and its impact on corrosion. SAE Technical 2006-01-3303, 2006.
24.
KamisnkiJKurzydlowskiKJ.Use of impedance spectroscopy on testing corrosion resistance of carbon steel and stainless steel in water–biodiesel configuration. J Corros Measur2008;
6: B35–B39.
25.
KlofutarBGolobJ.Microorganisms in diesel and in biodiesel fuels.Acta Chim Slovenica2007;
54: 744–748.
26.
GerhardKKevinRS.The effect of metals and metal oxides on biodiesel oxidative stability from promotion to inhibition. Fuel Process Technol2018;
177: 75–80.
27.
KalamMAMasjukiHH.Biodiesel from palmoil – an analysis of its properties and potential. Biomass Bioenergy2002;
23: 471–479.
28.
MaruMMLuccheseMMLegnaniC, et al.
Biodiesel compatibility with carbon steel and HDPE parts. Fuel Process Technol2009;
90: 1175–1182.
29.
KaulSSaxenaRCKumarA, et al.
Corrosive behaviour of biodiesel from seed oils of Indian origin on diesel engine parts. Fuel Process Technol2007;
88: 303–307.
30.
HuangTJTsaiDH.CO oxidation behavior of copper and copper oxides. Catalysis Letters2003;
87: 173–174.
31.
FazalMAHaseebASMAMasjukiHH.Effect of different corrosion inhibitors on the corrosion of cast iron in palm biodiesel. Fuel Process Technol2011;
92: 2154–2159.
32.
HaseebASMAFazalMAJahirulMI, et al.
Compatibility of automotive materials in biodiesel: a review. Fuel2011;
90: 922–931.
33.
RajasekarAMaruthamuthuSPalaniswamyN, et al.
Biodegradation of corrosion inhibitors and their influence on petroleum product pipeline. Microbiol Res2007;
162: 355–368.
34.
VinothTBalajiBRamanathanA.Experimental investigation of tribo-corrosion and engine characteristics of Aegle marmelos Correa biodiesel and its diesel blends on direct injection diesel engine. Energy2019;
171: 879–892.
35.
AlvesSMDutra-PereiraFKBicudoTC.Influence of stainless steel corrosion on biodiesel oxidative stability during storage. Fuel2019;
249: 73–79.
36.
DavidMFAndréLSAlexandreFL, et al.
Corrosive character of Moringa oleifera Lam biodiesel exposed to carbon steel under simulated storage conditions. Renewable Energy2019;
139: 1263–1271.
37.
FazalMAHaseebASMAMasjukiHH.Comparative corrosive characteristics of petroleum diesel and palm biodiesel for automotive materials. Fuel Process Technol2010;
91: 1308–1315.
38.
OgawaTKajiyaSOhshimaA, et al. Analysis of the deterioration of nylon-66 immersed in GTL diesel fuel part 1. Analysis and test of nylon and GTL diesel fuel before and after immersion. SAE technical paper 2006-01-3326, 2006.
39.
PullenJSaeedK.An overview of biodiesel oxidation stability. Renewable Sustainable Energy Rev2012;
16: 5924–5950.
40.
ObadiahAKannanRRamasubbuA, et al.
Studies on the effect of antioxidants on the long-term storage and oxidation stability of Pongamia pinnata (L.) Pierre biodiesel. Fuel Process Technol2012;
99: 56–63.
41.
DunnRO.Antioxidants for improving storage stability of biodiesel. Biofuels Bioprod Biorefin2008;
2: 304–318.
42.
DamascenoSSSantosNASantosIMGSouzaAL, et al.
Caffeic and ferulic acids: an investigation of the effect of antioxidants on the stability of soybean biodiesel during storage. Fuel2013;
107: 641–646.
43.
SantosNADamascenoSSde AraújoPHM, et al.
Caffeic acid: an efficient antioxidant for soybean biodiesel contaminated with metals. Energy Fuels2011;
25: 4190–4194.
44.
MaiaECRBorsatoDMoreiraI, et al.
Study of the biodiesel B100 oxidative stability in mixture with antioxidants. Fuel Process Technol2011;
92: 1750–1755.
45.
LapuertaMRodríguez-FernándezJRamosÁ, et al.
Effect of the test temperature and anti-oxidant addition on the oxidation stability of commercial biodiesel fuels. Fuel2012;
93: 391–396.
46.
ASTM G31-12a:2012. Standard guide for laboratory immersion corrosion testing of metals.
47.
ChenZHuangLZhangG, et al.
Benzotriazole as a volatile corrosion inhibitor during the early stage of copper corrosion under adsorbed thin electrolyte layers. Corrosion Sci2012;
65: 214–222.
48.
ASTM G46-94:2018. Standard guide for examination and evaluation of pitting corrosion.
49.
ASTM G1-03:2017. Standard practice for preparing, cleaning, and evaluating corrosion test specimens.
50.
FazalMAHaseebASMAMasjukiHH.Corrosion mechanism of copper in palm biodiesel. Corros Sci2013;
67: 50–59.
51.
FazalMAJakeriaMRHaseebASMA.Effect of copper and mild steel on the stability of palm biodiesel properties: a comparative study. Ind Crops Prod2014;
58: 8–14.
52.
Diana-LucianaCGheorgheBIbrahimR, et al.
Degradation of automotive materials upon exposure to sunflower biodiesel. Ind Crops Prod2014;
54: 149–158.
53.
ConceiçãoJNMarangoniBSMichelsFS, et al.
Evaluation of molecular spectroscopy for predicting oxidative degradation of biodiesel and vegetable oil: correlation analysis between acid value and UV–vis absorbance and fluorescence. Fuel Process Technol2019;
183: 1–7.
54.
ASTM D6751-20:2020. Standard specification for biodiesel fuel blend stock (B100) for middle distillate fuels.
55.
ChourasiaSPatelPDLakdawalaA, et al.
Study on tribological behavior of biodiesel – diethyl ether (B20A4) blend for long run test on compression ignition engine. Fuel2018;
230: 64–77.
56.
BaenaLMCalderonJA.Effects of palm biodiesel and blends of biodiesel with organic acids on metals. Heliyon2020;
6: e03735.
57.
KumarN.Oxidative stability of biodiesel: causes, effects and prevention. Fuel2017;
190: 328–350.
58.
SarinAAroraRSinghNP, et al.
Influence of metal contaminants on oxidation stability of jatropha biodiesel. Energy2009;
34: 1271–1275.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
