In this research, buckling and vibrational characteristics of a spinning cylindrical moderately thick shell covered with piezoelectric actuator carrying spring-mass systems are performed. This structure rotates about axial direction and the formulations include the Coriolis and centrifugal effects. In addition, various cases of thermal (uniform, linear, and nonlinear) distributions are studied. The modeled cylindrical moderately thick shell covered with piezoelectric actuator, its equations of motion, and boundary conditions are derived by the Hamilton's principle and based on a moderately cylindrical thick shell theory. For the first time in the present study, attached mass-spring systems has been considered in the rotating cylindrical moderately thick shells covered with piezoelectric actuator. The accuracy of the presented model is verified with previous studies. The novelty of the current study is consideration of the applied voltage, rotation, various temperature distributions, and mass-spring systems implemented on proposed model using moderately cylindrical thick shell theory. Generalized differential quadrature method is examined to discretize the model and to approximate the governing equations. In this study, the simply supported conditions have been applied to edges and cantilever (clamped–free) boundary conditions has been studied in x = 0, L, respectively. Finally, the effects of the applied voltage, angular velocity, temperature changes, and spring-mass systems on the critical voltage, critical angular speed, critical temperature, and natural frequency of the structure are investigated.
HosseiniMBahaadiniRMakkiabadiM. Application of the Green function method to flow-thermoelastic forced vibration analysis of viscoelastic carbon nanotubes. Microfluid Nanofluid2018; 22: 6.
2.
Bryan GH. On the beats in the vibrations of a revolving cylinder or bell. In: Proceedings of the Cambridge Philosophical Society, 1890, pp.101–111.
3.
DiTarantoRLessenM. Coriolis acceleration effect on the vibration of a rotating thin-walled circular cylinder. J Appl Mech1964; 31: 700–701.
4.
SrinivasanALauterbachGF. Traveling waves in rotating cylindrical shells. J Eng Ind1971; 93: 1229–1232.
5.
ZoharAAboudi J. The free vibrations of a thin circular finite rotating cylinder. Int J Mech Sci1973; 15: 269–278.
HuangSSoedelW. Effects of Coriolis acceleration on the forced vibration of rotating cylindrical shells. J Appl Mech1988; 55: 231–233.
8.
HuangSHsuB. Resonant phenomena of a rotating cylindrical shell subjected to a harmonic moving load. J Sound Vib1990; 136: 215–228.
9.
RandOStavskyY. Free vibrations of spinning composite cylindrical shells. Int J Solids Struct1991; 28: 831–843.
10.
ChenYZhaoHShenZ, et al.Vibrations of high speed rotating shells with calculations for cylindrical shells. J Sound Vib1993; 160: 137–160.
11.
LiXDuCLiY. Parametric instability of a functionally graded cylindrical thin shell subjected to both axial disturbance and thermal environment. Thin-Wall Struct2018; 123: 25–35.
12.
LiXDuCLiY. Parametric resonance of a FG cylindrical thin shell with periodic rotating angular speeds in thermal environment. Appl Math Model2018; 59: 393–409.
13.
LiXLiYXieT. Vibration characteristics of a rotating composite laminated cylindrical shell in subsonic air flow and hygrothermal environment. Int J Mech Sci2019; 150: 356–368.
14.
KhareRKKantTGargAK. Closed-form thermo-mechanical solutions of higher-order theories of cross-ply laminated shallow shells. Compos Struct2003; 59: 313–340.
15.
PourmoayedAFardKMShahraviM. Vibration analysis of a cylindrical sandwich panel with flexible core using an improved higher-order theory. Latin Am J Solids Struct2017; 14: 714–742.
16.
KhaliliSDavarAFardKM. Free vibration analysis of homogeneous isotropic circular cylindrical shells based on a new three-dimensional refined higher-order theory. Int J Mech Sci2012; 56: 1–25.
17.
JabbariMNejadMZGhannadM. Thermo-elastic analysis of axially functionally graded rotating thick cylindrical pressure vessels with variable thickness under mechanical loading. Int J Eng Sci2015; 96: 1–18.
18.
NejadMZJabbariMGhannadM. Elastic analysis of axially functionally graded rotating thick cylinder with variable thickness under non-uniform arbitrarily pressure loading. Int J Eng Sci2015; 89: 86–99.
19.
AfshinAZamani NejadMDastaniK. Transient thermoelastic analysis of FGM rotating thick cylindrical pressure vessels under arbitrary boundary and initial conditions. J Comput Appl Mech2017; 48: 15–26.
20.
SafarpourHGhanizadehSAHabibiM. Wave propagation characteristics of a cylindrical laminated composite nanoshell in thermal environment based on the nonlocal strain gradient theory. Eur Phys J Plus2018; 133: 532.
21.
TourangHLoghmanAAzamiM, et al.Semi-analytical solution for electro-thermo-mechanical non-stationary creep behaviour of rotating disk made of nonlinear piezoelectric polymer. Plast Rub Compos2018; 47: 122–132.
22.
EbrahimiFHabibiMSafarpourH. On modeling of wave propagation in a thermally affected GNP-reinforced imperfect nanocomposite shell. Eng Comput2018.
23.
SafarpourHHajilakZEHabibiM. A size-dependent exact theory for thermal buckling, free and forced vibration analysis of temperature dependent FG multilayer GPLRC composite nanostructures restring on elastic foundation. Int J Mech Mater Des2018.
24.
EslamiMZiaiiAGhorbanpourA. Thermoelastic buckling of thin cylindrical shells based on improved stability equations. J Therm Stress1996; 19: 299–315.
TorabiMAShafieefarM. An experimental investigation on the stability of foundation of composite vertical breakwaters. J Marine Sci Appl2015; 14: 175–182.
28.
LauraPSusemihlEPomboJ, et al.On the dynamic behaviour of structural elements carrying elastically mounted, concentrated masses. Appl Acoust1977; 10: 121–145.
29.
RossitCLauraP. Free vibrations of a cantilever beam with a spring–mass system attached to the free end. Ocean Eng2001; 28: 933–939.
30.
BanerjeeJ. Free vibration of beams carrying spring-mass systems − A dynamic stiffness approach. Comput Struct2012; 104: 21–26.
31.
HozhabrossadatiSMAftabi SaniAMofidM. Free vibration analysis of a beam with an intermediate sliding connection joined by a mass-spring system. J Vib Control2016; 22: 955–964.
32.
HozhabrossadatiSMSaniAAMofidM. A closed-form study on the free vibration of a grid joined by a mass-spring system. J Vib Control2016; 22: 1147–1157.
33.
HozhabrossadatiSMSaniAAMofidM. Vibration of beam with elastically restrained ends and rotational spring-lumped rotary inertia system at mid-span. Int J Struct Stab Dyn2015; 15: 1450040.
34.
ShojaeefardMMahinzareMSafarpourH, et al.Free vibration of an ultra-fast-rotating-induced cylindrical nano-shell resting on a Winkler foundation under thermo-electro-magneto-elastic condition. Appl Math Model2018; 61: 255–279.
35.
SafarpourHMohammadiKGhadiriM, et al.Effect of porosity on flexural vibration of CNT-reinforced cylindrical shells in thermal environment using GDQM. Int J Struct Stab Dyn2018; 18: 1850123.
36.
SafarPourHHosseiniMGhadiriM. Influence of three-parameter viscoelastic medium on vibration behavior of a cylindrical nonhomogeneous microshell in thermal environment: an exact solution. J Therm Stress2017; 40: 1353–1367.
37.
SafarPourHMohammadiKGhadiriM, et al.Influence of various temperature distributions on critical speed and vibrational characteristics of rotating cylindrical microshells with modified lengthscale parameter. Eur Phys J Plus2017; 132: 281.
38.
SafarpourHMohammadiKGhadiriM. Temperature-dependent vibration analysis of a FG viscoelastic cylindrical microshell under various thermal distribution via modified length scale parameter: a numerical solution. J Mech Behav Mater2017; 26: 9–24.
39.
GhadiriMShafieiNSafarpourH. Influence of surface effects on vibration behavior of a rotary functionally graded nanobeam based on Eringen's nonlocal elasticity. Microsyst Technol2017; 23: 1045–1065.
40.
SafarPourHGhadiriM. Critical rotational speed, critical velocity of fluid flow and free vibration analysis of a spinning SWCNT conveying viscous fluid. Microfluid Nanofluid2017; 21: 22.
41.
GhadiriMSafarPourH. Free vibration analysis of size-dependent functionally graded porous cylindrical microshells in thermal environment. J Therm Stress2017; 40: 55–71.
42.
BarootiMMSafarpourHGhadiriM. Critical speed and free vibration analysis of spinning 3D single-walled carbon nanotubes resting on elastic foundations. Eur Phys J Plus2017; 132: 6.
43.
GhadiriMSafarpourH. Free vibration analysis of embedded magneto-electro-thermo-elastic cylindrical nanoshell based on the modified couple stress theory. Appl Phys A2016; 122: 833.
44.
PourjabariAHajilakZEMohammadiA, et al.Effect of Porosity on free and forced vibration characteristics of the GPL reinforcement composite nanostructures. Comput Math Appl2019.
45.
VafamehrAKhodayarMEAbdelghanyK. Oligopolistic competition among cloud providers in electricity and data networks. IEEE Trans Smart Grid2017.
46.
VafamehrAKhodayarMEManshadiSD, et al.A framework for expansion planning of data centers in electricity and data networks under uncertainty. IEEE Trans Smart Grid2017.
47.
HabibiMTaghdirASafarpourH. Stability analysis of an electrically cylindrical nanoshell reinforced with graphene nanoplatelets. Compos Part B: Eng2019.
48.
Masoud MohammadgholihaASHabibiMSafarpourH. Buckling and frequency analysis of the nonlocal strain–stress gradient shell reinforced with graphene nanoplatelets. J Vib Control2019.
49.
HabibiMHashemiRGhazanfariA, et al.Forming limit diagrams by including the M–K model in finite element simulation considering the effect of bending. Proc IMechE, Part L: J Materials: Design and Applications2018; 232: 625–636.
50.
HabibiMHashemiRTaftiMF, et al.Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding. J Manuf Process2018; 31: 310–323.
51.
HabibiMHashemiRSadeghiE, et al.Enhancing the mechanical properties and formability of low carbon steel with dual-phase microstructures. J Mater Eng Perform2016; 25: 382–389.
52.
HabibiMGhazanfariAAssempourA, et al.Determination of forming limit diagram using two modified finite element models. Mech Eng2017, pp. 48.
53.
GhazanfariAAssempuorAHabibiM, et al.Investigation on the effective range of the through thickness shear stress on forming limit diagram using a modified Marciniak–Kuczynski model. Modares Mech Eng2016; 16: 137–143.
54.
HosseiniSMRHabibiMAssempourA. Experimental and numerical determination of forming limit diagram of steel-copper two-layer sheet considering the interface between the layers. Modares Mech Eng2018; 18: 174–181.
55.
AlipourMTorabiMASarebanM, et al.Finite element and experimental method for analyzing the effects of martensite morphologies on the formability of DP steels. J Mech Based Des Struct Mach2019.
56.
DucNDQuanTQLuatVD. Nonlinear dynamic analysis and vibration of shear deformable piezoelectric FGM double curved shallow shells under damping-thermo-electro-mechanical loads. Compos Struct2015; 125: 29–40.
57.
Dinh DucNHong CongP. Nonlinear thermo-mechanical dynamic analysis and vibration of higher order shear deformable piezoelectric functionally graded material sandwich plates resting on elastic foundations. J Sandw Struct Mater2018; 20: 191–218.
58.
AlamMN. Active vibration control of a piezoelectric beam using PID controller: experimental study. Latin Am J Solids Struct2012; 9: 657–673.
59.
RahmanNuAlamMN. Structural control of piezoelectric laminated beams under thermal load. J Therm Stress2015; 38: 69–95.
60.
BaratiMRZenkourAM. Electro-thermoelastic vibration of plates made of porous functionally graded piezoelectric materials under various boundary conditions. J Vib Control2018; 24: 1910–1926.
61.
SuZJinGYeT. Electro-mechanical vibration characteristics of functionally graded piezoelectric plates with general boundary conditions. Int J Mech Sci2018; 138: 42–53.
62.
SetoodehAShojaeeMMalekzadehP. Application of transformed differential quadrature to free vibration analysis of FG-CNTRC quadrilateral spherical panel with piezoelectric layers. Comput Methods Appl Mech Eng2018; 335: 510–537.
63.
SafarPourHGhanbariBGhadiriM. Buckling and free vibration analysis of high speed rotating carbon nanotube reinforced cylindrical piezoelectric shell. Appl Math Model2019; 65: 428–442.
64.
WangQ. On buckling of column structures with a pair of piezoelectric layers. Eng Struct2002; 24: 199–205.
65.
TauchertTR. Energy principles in structural mechanics, New York: McGraw-Hill, 1974.
66.
KeLWangYReddyJ. Thermo-electro-mechanical vibration of size-dependent piezoelectric cylindrical nanoshells under various boundary conditions. Compos Struct2014; 116: 626–636.
67.
KadoliRGanesanN. Buckling and free vibration analysis of functionally graded cylindrical shells subjected to a temperature-specified boundary condition. J Sound Vib2006; 289: 450–480.
68.
ZeighampourHBeniYT. Size-dependent vibration of fluid-conveying double-walled carbon nanotubes using couple stress shell theory. Physica E: Low-dimens Syst Nanostruct2014; 61: 28–39.
69.
OliaHTorabiMBahiraeiM, et al.Application of nanofluids in thermal performance enhancement of parabolic trough solar collector: state-of-the-art. Appl Sci2019; 9: 463.
70.
ZahabiHTorabiMAlamatianE, et al.Effects of geometry and hydraulic characteristics of shallow reservoirs on sediment entrapment. Water2018; 10: 1725.
71.
Shu C. Differential quadrature and its application in engineering. New York: Springer Science & Business Media, 2012.
72.
CivalekÖ. Application of differential quadrature (DQ) and harmonic differential quadrature (HDQ) for buckling analysis of thin isotropic plates and elastic columns. Eng Struct2004; 26: 171–186.
ReddyJ. Exact solutions of moderately thick laminated shells. J Eng Mech1984; 110: 794–809.
75.
ArmenàkasAEGazisDCHerrmannG. Free vibrations of circular cylindrical shellsNew York: Elsevier..
76.
LoyCLamK. Vibration of thick cylindrical shells on the basis of three-dimensional theory of elasticity. J Sound Vib1999; 226: 719–737.
77.
LoyCLamKShuC. Analysis of cylindrical shells using generalized differential quadrature. Shock Vib1997; 4: 193–198.
78.
EbrahimiFHajilakZEHabibiM, et al.Buckling and vibration characteristics of a carbon nanotube-reinforced spinning cantilever cylindrical 3D shell conveying viscous fluid flow and carrying spring-mass systems under various temperature distributions. Proc I MechE, Part C: J Mechanical Engineering Science2019.
79.
HabibiMHashemabadiDSafarpourH. Vibration analysis of a high-speed rotating GPLRC nanostructure coupled with a piezoelectric actuator. Eur Phys J Plus2019; 134: 307.
