In this paper, a dynamic load identification iteration algorithm based on Newmark-β is proposed. Aiming at the problem of excessive iteration error in the process of calculation, a self-filtering algorithm is proposed and added to the load identification algorithm. After adding the self-filtering algorithm, the recognition accuracy of the algorithm has been improved significantly. The recognition result of the proposed method and explicit Newmark-β method is compared by simulations and experiment. The results show that the recognition precision and calculation efficiency of this algorithm are higher, especially in the aspect of calculation efficiency, the proposed method has obvious advantages. Under the same conditions, the proposed method can save a lot of computation time.
LiuJSunXSMengXH, et al.A novel shape function approach of dynamic load identification for the structures with interval uncertainty. Int J Mech Mater Des2016; 12: 375–386.
2.
LiKLiuJHanX, et al.Identification of oil-film coefficients for a rotor-journal bearing system based on equivalent load reconstruction. Tribol Int2016; 104: 285–293.
3.
LiuYShepardS. Dynamic force identification based on enhanced least squares and total least-squares schemes in the frequency domain. J Sound Vib2005; 282: 37–60.
4.
QiaoBJZhangXWWangCX, et al.Sparse regularization for force identification using dictionaries. J Sound Vib2016; 368: 71–86.
5.
LiuJMengXHZhangDQ, et al.An efficient method to reduce ill-posedness for structural dynamic load identification. Mech Syst Signal Process2017; 95: 273–285.
6.
LageYEMaiaNMMNevesMM, et al.Force identification using the concept of displacement transmissibility. J Sound Vib2013; 332: 1674–1686.
7.
ChaoMHongxingHFengX. The identification of external forces for a nonlinear vibration system in frequency domain. Proc IMechE, Part C: J Mechanical Engineering Science2014; 228: 1531–1539.
8.
O'BrienEJMcgetrickPJGonzálezA. A drive-by inspection system via vehicle moving force identification. Smart Struct Syst2014; 13: 821–848.
9.
LiYGZhangJPWangLQ. A fault feature extraction method for rotor rubbing based on load identification and measured impact response. Procedia Eng2011; 24: 793–797.
10.
TangXJ. Dynamic load identification by time domain method. J Dalian Inst Technol1987; 26: 21–27.
11.
LiuJSunXHanX, et al.Dynamic load identification for stochastic structures based on Gegenbauer polynomial approximation and regularization method. Mech Syst Signal Process2015; 56–57: 35–54.
12.
ZhangFZhuDM. A new theoretical study of dynamic load identification based on generalized polynomial expansion. J Nanjing Univ Aeronaut Astronaut1996; 28: 755–760.
13.
LiuJMengXJiangC, et al.Time-domain Galerkin method for dynamic load identification. Int J Numer Methods Eng2016; 105: 620–640.
14.
LiuKLawSSZhuXQ, et al.Explicit form of an implicit method for inverse force identification. J Sound Vib2014; 333: 730–744.
15.
XuXOuJ. Force identification of dynamic systems using virtual work principle. J Sound Vib2015; 337: 71–94.
16.
ThiteANThompsonDJ. The quantification of structure-borne transmission paths by inverse methods. Part 1: improved singular value rejection methods. J Sound Vib2003; 264: 411–431.
17.
ThiteANThompsonDJ. The quantification of structure-borne transmission paths by inverse methods. Part 2: use of regularization techniques. J Sound Vib2003; 264: 433–451.
18.
ChoiHGThiteANThompsonDJ. A threshold for the use of Tikhonov regularization in inverse force determination. Appl Acoust2006; 67: 700–719.
19.
InoueHKishimotoKShibuyaT, et al.Estimation of impact force by an inverse analysis. Inverse problem in engineering mechanics, Basel: Switzerland, 1993, pp. 169–178.
20.
InoueHKishimotoKShibuyaT, et al.Regularization of numerical inversion of the Laplace transform for the inverse analysis of impact force. JSME Int J Ser A1998; 41: 473–479.
21.
JacquelinEBennaniAHamelinP. Force reconstruction: analysis and regularization of a deconvolution problem. J Sound Vib2003; 265: 81–107.
22.
AdamsRDoyleJF. Multiple force identification for complex structures. Exp Mech2000; 42: 25–37.
23.
JiaYYangZHGuoN, et al.Random dynamic load identification based on error analysis and weighted total least squares method. J Sound Vib2015; 358: 111–123.
24.
EggerHEnglHW. Tikhonov regularization applied to the inverse problem of option pricing: convergence analysis and rates. Inverse Prob2005; 21: 1027–1045.
25.
HuYWangZ. Finite element analysis and applications, Beijing: Tsinghua University Press, 2009.
26.
ZhongY. Identification of dynamic parameters for a cantilever beam and design of PD controller. Autom Instrum2011; 2: 36–37.
