The present paper focuses on the employment of a global-local approach for the simulation of moisture-induced swelling and stress in a 2D textile carbon fiber/epoxy matrix composite material. The approach is based on the development of a robust image-based finite element model built starting from X-ray microtomography scans of a repetitive unit cell of the textile material: simulations aim at investigating both the global (sample scale) level and the local micromechanical (interfaces between matrix and fibrous tows, matrix inside a tow) level behaviour. Three models at the different cited scales are first built (ply level model, tow level and fiber level model): then a non-concurrent (node-based) approach is used for coupling the models at different scales. The results of numerical simulation of moisture-induced swelling and stress are discussed, with emphasis on the identification of the most critical zones at which maximal stress values are calculated, at different scales.
MaromGThe role of water transport in composite materials. In: JComyn (ed). Polymer permeability▪▪. Chapter 9. London: Elsevier Applied Science, 1985, pp.341–374.
2.
VieilleBAucherJTalebL. Comparative study on the behavior of woven-ply reinforced thermoplastic or thermosetting laminates under severe environmental conditions. Mater Des2012; 35: 707–719.
3.
WeitsmanY. Coupled damage and moisture-transport in fiber-reinforced, polymeric composites. Int J Solids Struct1987; 23: 1003–1025.
4.
TangXet al.Micromechanics modeling of moisture diffusion in woven composites. Compos Sci Technol2005; 65: 817–826.
5.
TabatabaeiSALomovSVVerpoestI. Assessment of embedded element technique in meso-FE modelling of fibre reinforced composites. Compos Struct2014; 107: 436–446.
6.
HaMHCauvinLRassineuxA. A methodology to mesh mesoscopic representative volume element of 3D interlock woven composites impregnated with resin. Compt Rend Mécan2016; 344: 267–283.
7.
NaouarNet al.Meso-scale FE analyses of textile composite reinforcement deformation based on X-ray computed tomography. Compos Struct2014; 116: 165–176.
8.
SencuRMet al.Generation of micro-scale finite element models from synchrotron X-ray CT images for multidirectional carbon fibre reinforced composites. Composites Part A2016; 91(1): 85–95.
9.
MehdikhaniMet al.Full-field strain measurements at the micro-scale in fiber-reinforced composites using digital image correlation. Compos Struct2016; 40: 192–201.
10.
KimJHSwanCC. Voxel-based meshing and unit-cell analysis of textile composites. Int J Numer Meth Eng2003; 56: 977–1006.
BotschMKobbeltL. A remeshing approach to multiresolution modeling. Symp Geomet Process2004, pp. 185–192.
15.
ReitingerBBornikABeichelR. Constructing smooth non-manifold meshes of multi-labeled volumetric datasets. WSCG2005, pp. 227–234.
16.
BischoffSKobbeltL. Extracting consistent and manifold interfaces from multi-valued volume data sets. Bildverarbeitung fur die Medizin2006, pp. 281–285.
FarhatCet al.FETI‐DP: a dual–primal unified FETI method – part I: a faster alternative to the two‐level FETI method. Int J Numer Meth Eng2001; 50: 1523–1544.
19.
GuidaultP-Aet al.A multiscale extended finite element method for crack propagation. Comput Meth Appl Mech Eng2008; 197: 381–399.
20.
LadevèzePLoiseauODureisseixD. A micro–macro and parallel computational strategy for highly heterogeneous structures. Int J Numer Meth Eng2001; 52: 121–138.
21.
KanoutéPet al.Multiscale methods for composites: a review. Arch Comput Meth Eng2009; 16: 31–75.
22.
GhoshSLeeKMoorthyS. Multiple scale analysis of heterogeneous elastic structures using homogenisation theory and Voronoi cell finite element method. Int J Solids Struct1995; 32: 27–62.
23.
SaidaBEet al.Multi-scale modelling of strongly heterogeneous 3D composite structures using spatial Voronoi tessellation. J Mech Phys Solids2016; 88: 50–71.
24.
ReinosoJet al.Experimental and three-dimensional global local finite element analysis of a composite component including degradation process at the interfaces. Compos Part B2012; 43: 1929–1942.
Sinchuk Y, et al. Computed-tomography based modeling and simulation of moisture diffusion and induced swelling in textile composite materials. Int. J Solids Struct 2017.
27.
Minervino M. Effets de la thermo oxydation sur le comportement mécanique de matériaux composites pour applications aéronautiques. Thèse de docteur, ENSMA, Poitiers, France, 2013.
28.
TriasDet al.Random models versus periodic models for fibre reinforced composites. Comput Mater Sci2006; 38: 316–324.
29.
BarberoEJ. Introduction to composite materials design, New York: CRC Press, 1998.
30.
WrightWW. The effect of diffusion of water into epoxy resins and their carbon-fibre reinforced composites. Composites1981; 12: 201–205.
31.
Tohotenax Product Data Sheet, Tenax® HTS filament yarn, www.tohotenax.com/ (2014, accessed 1 October 2017).
32.
Ciba data sheet. Matrix systems for aerospace composites, www.lindberg-lund.com/ (1998, accessed 1 October 2017).
33.
Whitney JM and Mc Cullough RL. Micromechanical materials modeling. In: Carlsson LA and Gillespie JW (eds) Delaware composites design encyclopedia. Vol. 2. Westport, CT: Technomic Publishing Company Inc, 1990.
34.
GouJJet al.Numerical prediction of effective thermal conductivities of 3D four-directional braided composites. Compos Struct2015; 125: 499–508.
PodshivalovLFischerABar-YosephPZ. 3D hierarchical geometric modeling and multiscale FE analysis as a base for individualized medical diagnosis of bone structure. Bone2011; 488: 693–703.
