To obtain a high temporal resolution of mass flow data, a flowmeter based on the differential pressure method has been developed. It is capable of detecting negative flow for investigations of dynamic effects in small centrifugal compressors used for turbocharging automotive internal combustion engines. Experiments were performed at a hot gas test bench focusing on the surge characteristics at different turbocharger speeds and the influence of volume modifications downstream of the compressor. Instantaneous operating points could be traced in the compressor map including the typical orbits at deep surge resulting from the cyclic character of the phenomenon.
GreitzerEM. Surge and rotating stall in axial flow compressors. J Eng Power1976; 98: 190–217.
2.
GalindoJSerranoJRClimentHet al.Experiments and modelling of surge in small centrifugal compressor for automotive engines. Exp Therm Fluid Sci2008; 32: 818–826.
3.
Kabalyk K, Liskiewicz G, Horodko L, et al. Use of pressure spectral maps for analysis of influence of the plenum volume on the surge in centrifugal blower. In: Proceedings of ASME Turbo Expo 2014, Düsseldorf, Germany, 16–20 June 2014, paper no. GT2014-26931.
4.
Grigoriadis P. Experimentelle Erfassung und Simulation instationärer Verdichterphänomene bei Turboladern von Fahrzeugmotoren. PhD Thesis, Technische Universität Berlin, Germany, 2008.
5.
PucherHZinnerK. Aufladung von Verbrennungsmotoren, 4th ed. Berlin: Springer Vieweg, 2012.
6.
GajanPMottramRCHebrardPet al.The influence of pulsating flows on orifice plate flowmeters. Flow Meas Instrum1992; 3: 118–129.
7.
Doblhoff-DierKKudlatyKWiesingerMet al.Time resolved measurement of pulsating flow using orifices. Flow Meas Instrum2011; 22: 97–103.
Laurantzon F. Flow measuring techniques in steady and pulsating compressible flows. Technical Report, KTH Mechanics, Stockholm, Sweden, 2010.
10.
Reuter S. Erweiterung des Turbinenkennfelds von Pkw-Abgasturboladern durch Impulsbeaufschlagung. PhD Thesis, Technische Universität Dresden, Germany, 2010.
11.
ISO 5167-1:2003. Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full – Part 1: General principles and requirements, Geneva, Switzerland: ISO, 2003.
12.
ISO 5167-4:2003. Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full – Part 4: Venturi tubes, Geneva, Switzerland: ISO, 2003.
13.
MottramRC. Damping criteria for pulsating gas flow measurement. Flow Meas Instrum1989; 1: 15–23.
Schäfer C, Sandor I and Baar R. Improvement of the performance prediction of a small centrifugal compressor for automotive applications using computational fluid dynamics. In: Proceedings of the 12th international symposium on experimental and computational aerothermodynamics of internal flows, Lerici, Italy, 13–16 July 2015, paper no. ISAIF12-004.
16.
Pucher H and Mai H. TC mapping – Parameterstudie zur Turbolader-Kennfeldvermessung. Final Report, VFI, 2010.
