Taking into account different drag torque, this paper investigates the influence of the lubricant films located in the backlash between meshing gear teeth pair on the gear dynamical behaviors. Numerical simulations show that the influence of the lubricant film on the coast side is significant under low loading, but under increased drag torques the influence is diminished. The shape of the hysteresis loop of double-sided films suggests that this model can make more sense. The sensitive of the drag torque is studied to illustrate the inverse relationship between drag torque and gear rattle: increased drag torque loading will increase to possibility of metal–metal contact which could generate noise, while decreased drag torque loading can promote noise due to rattle.
AmabiliMRivolaA. Dynamic analysis of spur gear pairs: steady-state response and stability of the SDOF model with time-varying meshing damping. Mech Syst Signal Process1997; 11: 375–390.
PatirNChengH. An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication. J Tribol1978; 100: 12–17.
5.
PatirNChengH. Application of average flow model to lubrication between rough sliding surfaces. J Tribol1979; 101: 220–229.
6.
LarssonR. Transient non-Newtonian elastohydrodynamic lubrication analysis of an involute spur gear. Wear1997; 207: 67–73.
7.
PeiranWYouqiangYXuejuanY. Transient thermal micro-elastohydrodynamic lubrication analysis of an involute spur gear. Chin J Mech Eng2007; 43: 142–148.
8.
Grubin AN. Fundamentals of the hydrodynamic theory of lubrication of heavily loaded cylindrical surfaces. In: Ketova KhF (ed.) Investigations of the contact of machine components. Moscow: TsNIITMASh, (D.S.I.R., London, Translation 337), Book 30, 1949, pp.115–166.
9.
DowsonDHigginsonG. A numerical solution to the elasto-hydrodynamic problem. J Mech Eng Sci1959; 1: 6–15.
10.
DowsonDHigginsonGRArchardJ. Elasto-hydrodynamic lubrication: the fundamentals of roller and gear lubrication, Oxford: Pergamon Press, 1966.
11.
KahramanASinghR. Non-linear dynamics of a spur gear pair. J Sound Vib1990; 142: 49–75.
12.
BrancatiRRoccaERussoR. A gear rattle model accounting for oil squeeze between the meshing gear teeth. Proc IMechE, Part D: J Automobile Engineering2005; 219: 1075–1083.
13.
AmarnathMSujathaCSwarnamaniS. Experimental studies on the effects of reduction in gear tooth stiffness and lubricant film thickness in a spur geared system. Tribol Int2009; 42: 340–352.
14.
BrancatiRRoccaERussoR. An analysis of the automotive driveline dynamic behaviour focusing on the influence of the oil squeeze effect on the idle rattle phenomenon. J Sound Vib2007; 303: 858–872.
15.
RussoRBrancatiRRoccaE. Experimental investigations about the influence of oil lubricant between teeth on the gear rattle phenomenon. J Sound Vib2009; 321: 647–661.
16.
Gill-JeongC. Analysis of the nonlinear behavior of gear pairs considering hydrodynamic lubrication and sliding friction. J Mech Sci Technol2009; 23: 2125–2137.
17.
BarbieriMLubrechtAAPellicanoF. Behavior of lubricant fluid film in gears under dynamic conditions. Tribol Int2013; 62: 37–48.
18.
Venner C and Lubrecht A. Multilevel Methods in Lubrication. Netherlands: Elsevier Press, 2000.
19.
XueJ-hLiWQinC. The scuffing load capacity of involute spur gear systems based on dynamic loads and transient thermal elastohydrodynamic lubrication. Tribol Int2014; 79: 74–83.
20.
BairSHabchiWSperkaP. Quantitative elastohydrodynamic film forming for a gear oil with complex shear-thinning. Proc IMechE, Part J: J Engineering Tribology. Epub ahead of print 2015. DOI: 1350650115600185.
21.
TheodossiadesSDe la CruzMRahnejatH. Prediction of airborne radiated noise from lightly loaded lubricated meshing gear teeth. Appl Acoust2015; 100: 79–86.
CruzMDTheodossiadesSKingP. Transmission drive rattle with thermo-elastohydrodynamic impacts: numerical and experimental investigations. Int J Powertrain2011; 1: 137–161.
25.
AndersonNELoewenthalSH. Spur-gear-system efficiency at part and full load, NASA technical paper, 1980.
26.
KimT-CSinghR. Dynamic interactions between loaded and unloaded gear pairs under rattle conditions, SAE technical paper, 2001.
27.
DoanSRyborzJBertscheB. Rattling and clattering noise in automotive transmissions – simulation of drag torque and noise. Tribol Ser2003; 43: 109–121.
28.
LuTLiHZhangJ. Supervisor control strategy of synchronizer for wet DCT based on online estimation of clutch drag torque. Mech Syst Signal Process2016; 66: 840–861.
29.
KhabouMBouchaalaNChaariF. Study of a spur gear dynamic behavior in transient regime. Mech Syst Signal Process2011; 25: 3089–3101.
