Dynamical behaviors and control of planar crank–slider mechanism considering the effects of joint clearance and link flexibility are studied. A control scheme for maintaining continuous contact is proposed. It was observed that using one actuator for control scheme might cause the actuator to reach its saturation limit, a problem that was bypassed by installing an additional actuator on connecting rod. In one actuator case, only continuous contact can be obtained, while with the aid of two actuators, point contact can be achieved. Great improvements in the performance of mechanism and reduction of vibrations are observed in the case of using an additional actuator.
EarlesSWEWuCLS. Motion analysis of a rigid link mechanism with clearance at a bearing using Lagrangian mechanics and digital computation. Mech Instn Mech Engrs Lond1973, pp. 83–89.
2.
Earles SWE and Wu CLS. Predicting the occurrence of contact loss and impact at a bearing from a zero-clearance analysis. In: Proceedings of 4th world congress, IFToMM, Newcastle Upon Tyne, England, 1975, pp.1013–1018.
3.
DubowskySFreudensteinF. Dynamic analysis of mechanical systems with clearances, Part 1, Formulation of dynamic model. ASME J Eng Ind1971; 93: 305–309.
4.
DubowskyS. On predicting the dynamic effects of clearances in planar mechanisms. ASME J Eng Ind Ser B1974; 96: 317–323.
5.
HertzH. Über die Berührung fester elastischerKörper. J Reine Angew Math1881; 92: 156–171.
6.
LankaraniHMNikraveshPE. A contact force model with hysteresis damping for impactanalysis of multibody systems. J Mech Des1990; 112: 369–376.
7.
QiangTChengLMachadoM. A new model for dry and lubricated cylindrical joints with clearance in spatial flexible multibody systems. Nonlin Dyn2011; 64: 25–47.
8.
FloresPLankaraniHM. Spatial rigid-multibody systems with lubricated spherical clearance joints: Modeling and simulation. Nonlin Dyn2010; 60: 99–114.
9.
KoshyCSFloresPLankaraniHM. Study of the effect of contact force model on the dynamic response of mechanical systems with dry clearance joints: Computational and experimental approaches. Nonlin Dyn2013; 73: 325–338.
10.
FloresPKoshyCSLankaraniHM. Numerical and experimental investigation on multibody systems with revolute clearance joints. Nonlin Dyn2011; 65: 383–398.
11.
TangYChangZDongX. Nonlinear dynamics and analysis of a four-bar linkage with clearance. Front Mech Eng2013; 8: 160–168.
12.
HoufekMHoufekL. Bifurcation and chaos in couplings with clearance. Adv Mater Res2014; 936: 2120–2124.
13.
KakizakiTDeckJFDubowskyS. Modeling the spatial dynamics of robotic manipulators with flexible links and joint clearances. J Mech Des1993; 115: 839–847.
14.
Gu P, Dubowsky S and Mavroidis C. The design implications of chaotic and near-chaotic vibrations in machines. In: ASME design engineering technical conference, Atlanta, GA, USA, 1998.
15.
SchwabALMeijaardJPMeijersP. A comparison of revolute joint clearance model in the dynamic analysis of rigid and elastic mechanical systems. Mech Mach Theory2002; 37: 895–913.
16.
KhemiliIRomdhaneL. Dynamic analysis of a flexible slider–crank mechanism with clearance. Eur J Mech A-Solids2008; 27: 882–898.
17.
ErkayaSUzmayİ. Effects of balancing and link flexibility on dynamics of a planar mechanism having joint clearance. Scient Iran B2012; 19: 483–490.
18.
ErkayaS. Investigation of joint clearance effects on welding robot manipulators. Robot Comput-Integr Manufac2012; 28: 449–457.
19.
BaucghauOARodriguezJ. Modeling of joints with clearance in flexible multibody systems. Int J Solids Struct2002; 39: 41–63.
20.
Wu J, Xu G and Yin Z. Residual vibration reduction for a flexible positioning system using input shaping technique. In: Proceedings of the seventh world congress on intelligent control and automation, 2008, pp.443–448.
21.
LeeTFHuangAC. Vibration suppression in belt-driven servo systems containing uncertain nonlinear dynamics. J Sound Vib2011; 330: 17–26.
22.
LesieutreGADavisCL. An actively tuned solid-state vibration absorber using capacitive shunting of piezoelectric stiffness. J Sound Vib2000; 232: 601–617.
23.
AmbrósioJAC. Impact of rigid and flexible multibody systems: Deformation description and contact models. Virt Nonlin Multibody Syst Nato Adv Study Inst2002; 103: 15–33.
FloresPAmbrósioJClaroJCP. A study on dynamics of mechanical systems including joints with clearance and lubrication. Mech Mach Theory2006; 41: 247–261.
26.
TianQZhangYChenL. Dynamics of spatial flexible multibody systems with clearance and lubricated spherical joints. Comput Struct2009; 87: 913–929.
27.
YoonYSShimJSLeeSB. Reduction of the joint clearance effect for a planar flexible mechanism. J Mech Sci Technol1995; 9: 312–322.
28.
ParkCBKwakBM. Counterweight optimization for reducing dynamic effects of clearance at a revolute joint. Mech Mach Theory1987; 22: 549–556.
29.
ErkayaSUzmayİ. Modeling and simulation of joint clearance effects on mechanisms having rigid and flexible links. J Mech Sci Technol2014; 28: 2979–2986.
30.
SardashtiADanialiHMVarediSM. Optimal free-defect synthesis of four-bar linkage with joint clearance using PSO algorithm. Meccanica2013; 48: 1681–1693.
31.
ChunmeiJLingFYangQ. The vibration control of a flexible linkage mechanism with impact. Commun Nonlin Sci Numer Simul2004; 9: 459–469.
32.
ChengLQiangTHaiyanH. Dynamics and control of a spatial rigid-flexible multibody system with multiple cylindrical clearance joints. Mech Mach Theory2012; 52: 106–129.
33.
Flores P, Ambrósio J, Claro JCP, et al. Kinematics and dynamics of multibody systems with imperfect joints, Models and case studies. Lecture Notes in Applied and Computational Mechanics. 4th ed. New York: Springer, 2008.
34.
RaoSS. Vibration of continuous systems, 1st ed. London: Wiley, 2007.
