This paper presents a method of friction compensation for a linear electric motor in a model in the loop suspension test rig. The suspension consists of a numerically modeled spring and damper, with inputs of suspension motion. The linear motor is force controlled using a force sensor to track the output of the numerical model. The method uses a Coulomb friction model and applies a feedforward step signal when velocity zero crossing occurs. Velocity zero crossing estimation is achieved using an algorithm based on measured feedback velocity and force. Experimental results indicate reduction of force tracking error caused by Coulomb friction leading to improved test rig accuracy.
PlummerAR. Model-in-the-loop testing. Proc IMechE, Part I: J Systems and Control Engineering2006; 220: 183–199.
2.
WallaceMWaggDNeildS. An adaptive polynomial based forward prediction algorithm for multi-actuator real-time dynamic substructuring. Proc Royal Soc A: Math Phys Eng Sci2005; 461: 3807–3826.
3.
HoriuchiTInoueMKonnoT. Real-time hybrid experimental system with actuator delay compensation and its application to a piping system with energy absorber. Earthquake Eng Struct Dynam1999; 28: 1121–1141.
4.
WilliamsMBlakeboroughA. Laboratory testing of structures under dynamic loads: an introductory review. Philos Transact Royal Soc Lon Ser A: Math Phys Eng Sci2001; 359: 1651–1669.
5.
OlssonHAastromKCanudas De WitC. Friction models and friction compensation. Eur J Contrl1998; 4: 176–195.
6.
Bernstein N, Lawrence D and Pao L. Friction modelling and compensation for Haptic interfaces. In: Proceedings of the first joint Eurohaptics conference and symposium on Haptic interfaces for virtual environment and teleoperator systems, Washington, DC, 2005, pp.290–295. USA: IEEE.
7.
WangYXiongZDingH. Robust controller based on friction compensation and disturbace observer for a motion platform driven by a linear motor. Proc IMechE, Part I: J Systems and Control Engineering2006; 220: 33–39.
8.
ChenGSMeiXSTaoT. Friction Compensation using a double pulse method for a high-speed high-precision table. Proc IMechE, Part C: J Mechanical Engineering Science2011; 225: 1263–1272.
9.
Zhang Y, Liu G and Goldenberg AA. Friction compensation with estimated velocity. In: Proceedings. ICRA ‘02. IEEE international conference on robotics and automation, Washington, DC, 11–15 May 2002, pp.2650–2655. USA: IEEE.
10.
MitsunagaKMatsuoT. Adaptive compensation of friction forces with differential filter. Int J Comput Commun Contrl2008; 3: 80–89.
11.
BorghesanGMelchiorriC. Model and modeless friction compensation: application to a defective Haptic interface. Lect Notes Comput Sci5024; 2008: 94–103.
12.
YaoJJiaoZYaoB. Robust control for static loading of electro-hydraulic load simulator with friction compensation. Chinese J Aeronaut2012; 25: 954–962.
KitchingKJColeDJCebonDD. Performance of a semi-active damper for heavy vehicles. J Dyn Sys Meas Control1998; 122: 498–506.
15.
AhnH-SChenYQDouH. State-periodic adaptive compensation of cogging and Coulomb friction in permanent magnet linear motors. Magnet IEEE Transact2005; 41: 90–98.
16.
ChenS-LTanKKHuangS. Modeling and compensation of ripples and friction in permanent-magnet linear motor using a hysteretic relay. Mechatron IEEE/ASME Transact2010; 15: 586–594.
17.
TanKKHuangSNLeeTH. Robust adaptive numerical compensation for friction and force ripple in permanent-magnet linear motors. Magnet IEEE Transact2002; 38: 221–228.
