An investigation on secondary force contacts of tooth pairs in conventional harmonic drives with involute toothed gear set

Abstract

Originally fixed and uniform circular pitches of flex spline (FS) teeth of a ‘Strain Wave Gearing’ or ‘Harmonic Drive’ (HD) experience variations in pitch lengths when teeth move on ‘strain wave generating’ oval-shaped cam. This is due to varying root deformations of teeth. In case of teeth with widely used involute profile, away from the contacts on line of action through pitch point, they definitely experience force closeness to or separation from the circular spline’s (CS) originally conjugate tooth. We have estimated the deformed pitch distances at no load considering that FS teeth remain rigid while the rim deforms. The geometry of the oval-shaped pitch curve which is parallel to the elliptical outer profile of the cam is also defined. Similarly to maintain an elliptical pitch curve of FS, the oval cam is also defined. Both cases of tooth mesh of undeformed FS with CS and tooth mesh of deformed FS with CS, with involute teeth, are considered to find out tooth positions. Geometries of involute teeth profiles in mesh are examined and compared considering oval-shaped (on deformation) base drum of FS, whereas the base circle of the CS remained circular.

Keywords

Harmonic drive involute flex spline strain wave generator cam deformed pitch curve unequal pitches secondary contacts

Get full access to this article

View all access options for this article.

References

Routh B and Maiti R. On a gearing problem in conventional harmonic drives with involute toothed gear set. In: ASME IDETC/CIE 2011 conference on PTG, Washington, DC, USA, 29–31 August 2011.

Musser CW. Strain wave gearing. Patent 2.906.143, USA, 1959. (Apparently submitted in 1955).

Musser

. Break through in mechanical drive design – the harmonic drive. Mach Des 1960; 14: 160–172.

Kiyosawa Y, Sesahara M and Ishikawa S. Performance of a strain wave gearing using a new tooth profile. In: Proceedings, ASME Intl. PTG Conference, Chicago, USA, April 1989, vol. II, pp.607–612.

Kondo

Takada

. Study on tooth profiles of the harmonic drive. ASME J Mech Des 1990; 112: 131–137.

Peter

. Investigation of engagement of harmonic drives – Part II. Acta Tehnica (Budapest) 1982; 94: 223–233.

Kayabasi

Erzincanli

. Shape optimization of tooth profile of a flexspline for a harmonic drive by finite element modeling. Mater Des 2007; 28: 441–447.

Tuttle

Seering

. A nonlinear model of a harmonic drive gear transmission. IEEE Trans Robotic Automat 1996; 12: 368–373.

Ghorbel

Gandhi

Alpeter

. On the kinematic errors in harmonic drive gears. ASME J Mech Des 2001; 123: 90–97.

10.

Xiao-Long

. Determination of load sharing factor for planetary gearing with small tooth number difference. Mech Mach Theor 1995; 30: 313–321.

11.

Chang

Lee

. Improvement of the dynamic properties of a steel-composite hybrid flexspline of a harmonic drive. Compos Struct 1997; 38: 251–260.

12.

Jean

. A study on stress and vibration analysis of a steel and hybrid flex spline for harmonic drive. Compos Struct 1997; 47: 827–833.

13.

Jeong

Lee

. Development of the composite flexspline for a cycloid-type harmonic drive using net shape manufacturing method. Compos Struct 1995; 32: 557–565.

14.

King

. The design and characteristics of piezomotors using flexure-hinged displacement amplifiers. Robot Autonomous Syst 1996; 19: 189–197.

15.

Zhu

Qin

. Dynamics of an Electromechanical integrated electrostatic harmonic drive. J Electrostat 2007; 65: 54–66.

16.

Zhu

Qin

. Parametric vibration for electromechanical integrated electrostatic harmonic drive. Mechatronics 2007; 17: 31–43.

17.

Maiti R. An improved drive system such as a two gear epicyclic drive similar to harmonic drive system. Patent 186322, India, 1995.

18.

Maiti

. A novel harmonic drive with pure involute tooth gear pair. ASME J Mech Des 2004; 126: 178–182.

19.

Maiti R and Roy MC. Design, development and performance study of a new concept harmonic drive. Project (Ref. SR/S3/RM-04/2002, dated: 11-07-2002 of Department of Science and Technology, Government of India) Completion report, March 2005.

20.

Biswas I. Some studies on stresses in thin rimmed gears with specific reference to its application in ‘Harmonic Drives’. MS Thesis, IIT Kharagpur, 2005.

21.

Maiti R. An improved split cam assembly and an improved harmonic drive (strain wave gearing) system comprising the cam assembly. Patent 1457/KOL/2009, India, 2009.

22.

Maiti

Biswas

Nema

. Design and development of strain wave generating cam for a new concept ‘Harmonic Drive’. Proc IMechE, Part C: J Mechanical Engineering Science 2013; 227: 1870–1884.

23.

Maiti

Roy

. Minimum tooth difference in internal external involute gear pair. Mech Mach Theory 1996; 31: 475–485.

24.

Vladis

. Analytical investigation of the change in phase angle between the wave generator and the teeth meshing zone in high-torque mechanical harmonic drives. Mech Mach Theory 1997; 32: 533–538.

25.

Dong

Ting

K-L

Wang

. Kinematic fundamentals of planar harmonic drives. ASME J Mech Des 2011; 133: 1–8.

26.

Park

Jeong

J-H

Ryu

J-H

. Development of speed reducer with planocentric involute gearing mechanism. J Mech Sci Tech 2007; 21: 1172–1177.

27.

Elkholy

. Tooth load sharing in high contact ratio spur gears. ASME J Mech Transmis Automat Des 1985; 107: 11–16.

28.

Tsai S-J, Hwang G-L and Yeh S-Y. An Analytical approach for load sharing analysis of planetary gear drives. In: 13th World Congress in Mechanism and Machine Science, Guanajuato, México, 19–25 June 2011, paper no. A9_270.

29.

Terauchi

Nagamura

. Study on deflection of spur gear teeth: 2nd Report, Calculation of tooth deflection for spur gears with various tooth profiles. Bull JSME 1981; 24: 447–452.

30.

Oda

Miyachika

Shimizu

. Practical formula for tooth deflection of internal spur gear. Bull JSME 1986; 29: 3905–3910.