Sage Journals: Discover world-class research

Abstract

To improve the security and reliability of equipment and reduce their failure rate, a data-driven state detection algorithm was proposed. The concepts of multi-scale system, multi-scale entropy and multi-scale exergy were defined. The algorithm is used for multi-scale systems whose state parameters change over time and have the characteristic of increasing monotonically on a dominant scale. An abrasion index for the middle speed roller ring mill was constructed, which was used to monitor the states of the instruments. Noise that affected the accuracy of the results was analyzed. The results of simulation experiments demonstrate the effectiveness of the algorithm, which can provide a technical basis for condition maintenance.

Keywords

State detection multi-scale system multi-scale entropy multi-scale exergy abrasion index ash deposition index

Get full access to this article

View all access options for this article.

References

Zhang

. Improved multi-scale kernel principal component analysis and its application for fault detection. Chem Eng Res Des 2012; 90: 1271–1280.

Javier

Ricardo

. Gear dynamics monitoring using discrete wavelet transformation and multi-layer perceptron neural networks. Appl Soft Comput 2012; 9: 2867–2878.

Mogens

Michkl

Jan

. Diagnosis and fault-tolerant control, Berlin: Springer, 2006.

Shen

Steven

Adel

. A comparison study of basic data-driven fault diagnosis and process monitoring methods on the benchmark Tennessee Eastman process. J Process Control 2012; 9: 1567–1581.

Sirkka

Jamsa

. Future trends in process automation. Annu Rev Control 2007; 31: 211–220.

Chiang

Russel

Braatz

. Fault detection and diagnosis in industrial systems, Berlin: Springer, 2001.

Qin

. Survey on data-driven industrial process monitoring and diagnosis. Annu Rev Control 2012; 36: 220–234.

Kresta JV, MacGregor JF and Marlin TE. Multivariable statistical monitoring of process operating performance. In: AICHE annual meeting, San Francisco, CA, USA, 5–10 November 1989.

Storer

Georgakis

. Disturbance detection and isolation by dynamic principal component analysis. Chemom Intell Lab Syst 1995; 30: 179–196.

10.

Dong

Mcavoy

. Nonlinear principal component analysis-based on principal curves and neural networks. Comput Chem Eng 1996; 20: 65–78.

11.

Kramer

. Non-linear principal component analysis using autoassociative neural networks. AlChE J 1991; 37: 233–243.

12.

Cho

Lee

Choi

. Fault identiﬁcation for process monitoring using kernel principal component analysis. Chem Eng Sci 2005; 60: 279–288.

13.

Zhang

. Multivariate process monitoring and analysis based on multi-scale KPLS. Chem Eng Res Des 2011; 89: 2667–2678.

14.

Bakshi

. Multiscale PCA with application to multivariate statistical process monitoring. AlChE J 1998; 44: 1596–1610.

15.

Bakshi BR. Multiscale PCA with application to multivariate statistical process monitoring. AlChE J 1998; 44: 1596–1610.

16.

Lawa

Kima

Willey

. An approach based on wavelet packet decomposition and Hilbert–Huang transform (WPD–HHT) for spindle bearings condition monitoring. Mech Syst Signal Process 2012; 33: 197–211.

17.

Lawa LS, Kima JH, Willey YH, et al. An approach based on wavelet packet decomposition and Hilbert-Huang transform (WPD-HHT) for spindle bearings condition monitoring. Mech Syst Sig Process 2012; 33: 197–211.

18.

Kechida R and Menacer A. DWT wavelet transform for the rotor bars faults detection in induction motor. In: 2010 IEEE international conference on power and energy, Shenzhen, China, 15–17 November 2010.

19.

Zeng

Liu

. Application of wavelet multi-scale analysis for wear characteristics. Proc CSEE 2012; 23: 126–131.

20.

Jiwe

Delinag

Xinjun

. Abstracting trend component of wear characteristics based on wavelet transform. J North China Electric Power Univ (Nat Sci Ed) 2011; 38: 37–42.

Data-driven state detection algorithm for multi-scale systems and its application

Abstract

Keywords

Get full access to this article

References