In this study, the transfer matrix method is used to predict bending critical speeds of hydrogenerator shaft lines. A computer routine was developed for the calculations and this code is applied to two industrial hydrogenerators. The obtained results are compared with the data/guarantees from the equipments’ manufacturers. It is concluded that the present approach is a useful tool for rotor dynamics analysis at early design phases of hydrogenerator shaft lines.
MacintyreAJ. Máquinas motrizes hidráulicas, Rio de Janeiro: Guanabara Dois, 1983.
3.
RaoJS. Rotor dynamics, New Delhi: New Age International Publishers, 1996.
4.
VanceJM. Rotordynamics of turbomachinery, New York: John Wiley & Sons, 1988.
5.
ChildsDW. Turbomachinery rotordynamics, New York: John Wiley & Sons, 1993.
6.
ThomsonWT. Theory of vibration with applications, Detroit, MI: Prentice-Hall, 1972.
7.
VazLE. Método dos elementos finitos em análise de estruturas, São Paulo: Campus, 2010.
8.
AlmeidaMT. Vibrações mecânicas para engenheiros, 2a Edição. São Paulo: Edgard Blücher, 1990.
9.
TesárAFilloL. Transfer matrix method, Berlin: Springer, 1988.
10.
QuitzrauLE. Dynamic analysis of rotors of turbo and hydrogenerator groups by the transfer matrices method. (in Portuguese). MSc Thesis, Federal University of Rio Grande do Sul, Porto Alegre, Brazil, 2002.
11.
GustavssonR. Modelling and analysis of hydropower generator rotors, Licentiate Thesis: Luleå University of Technology, Luleå, Sweden, 2005.
12.
PopovEP. Introduction to mechanics of solids, Englewood cliffs, NJ: Prentice-Hall, 1968.
