Modelling and simulation of gear synchronisation and shifting in dual-clutch transmission equipped powertrains

Abstract

Dual-clutch transmissions have increased in prevalence through the combination of high efficiency and shift quality. This is achieved through the automation of conventional manual transmission synchronisers for gear selection with automated clutch-to-clutch shift control, minimising loss of traction to the road. This article derives a suitably detailed model of a dual-clutch transmission equipped powertrain for the transient simulation and analysis of combined synchroniser engagement and gear shifts. Models are derived for a powertrain equipped with a wet dual-clutch transmission with particular focus on a detailed synchroniser mechanism model, including speed synchronisation, ring unblocking and indexing stages of engagement. To demonstrate the combination of synchroniser engagement with clutch-to-clutch shifting, several simulations are conducted to study the variation of chamfer alignment, vehicle speed and synchroniser engagement timing on powertrain response. Results indicate that vehicle speed and chamfer alignment have only limited impact on the quality of shifting. Synchroniser timing can have a more significant influence on shift quality, stressing the need for independence of these processes.

Keywords

Dual-clutch transmission synchroniser shift transient powertrain dynamics

Get full access to this article

View all access options for this article.

References

Goetz M. Integrated powertrain control for twin clutch transmissions. PhD Thesis, University of Leeds, UK, 2005.

Kulkarni

Shim

Zhang

. Shift dynamics and control of dual-clutch transmissions. Mech Mach Theory 2007; 42(2): 168–182.

Liu Y, Qin D and Jiang H. A systematic model for dynamics and control of dual clutch transmissions. ASME J Mech Des 2010; 131(6): paper no. 061012.

Goetz

Levesley

Crolla

. Dynamics and control of gearshifts on twin-clutch transmission. Proc IMechE Part D: J Automob Eng 2005; 219(8): 951–963.

Goetz

Levesley

Crolla

. Dynamic modelling of a twin clutch transmission for controller design. Mater Sci Forum 2003; 440–441: 253–261.

Goetz

Levesley

Crolla

. A gearshift controller for twin clutch transmissions. VDI Ber 2003; 1786: 381–400.

Xuexun G, Chang F, Jun Y, et al. Modeling and simulation research of dual clutch transmission based on fuzzy logic control. SAE paper 2007-01-3754, 2007.

Cheng X and Wang, Y. The intelligent down-shift control for wet dual clutch transmission. In: 2011 International conference on mechatronic science, electrical engineering and computer, Beihua University, Jilin, China, 12–22 August, 2011, pp.189–192.

Kim

Cho

Choi

. Gear shift control of dual clutch transmissions with a torque rate limitation trajectory. 2011 American control conference. 29 June–1 July 2011. San Francisco, CA. 3338–3343.

10.

Walker

Zhang

Tamba

. Control of gear shifts in dual clutch transmission powertrains. Mech Syst Signal Process 2011; 26(6): 1923–1936.

11.

Galvagno

Velardocchia

Vigliani

. Dynamic and kinematic model of a dual clutch transmission. Mech Mach Theory 2011; 46(6): 794–805.

12.

Liu

Tseng

. Simulation and analysis of synchronisation and engagement on manual transmission gearbox. Int J Veh Des 2007; 43(1–4): 200–220.

13.

Hoshino H. Analysis on synchronisation mechanism of transmission. SAE paper 1999-01-0734, 1999.

14.

Walker

Zhang

. Parameter study of synchroniser mechanisms applied to dual clutch transmissions. Int J Powertrains 2011; 1(2): 198–220.

15.

Socin RJ and Walters LK. Manual transmission synchronizers. SAE paper 680008, 1968.

16.

De la Cruz

Theodossiades

Rahnjeat

. An investigation of manual transmission drive rattle. Proc IMechE Part K: J Multi-body Dyn 2009; 224(2): 167–181.

17.

Fredriksson J and Karlsson J. Cylinder-by-cylinder engine models vs. mean value engine models for use in powertrain control applications. SAE paper 1999-01-0906, 1999.

18.

Vasca

Iannelli

Senatore

. Transmissibility assessment for automotive dry-clutch engagement. IEEE/ASME T Mech 2011; 16(3): 564–573.

19.

Crowther

Zhang

Liu

. Analysis and simulation of clutch engagement judder and stick-slip in automotive powertrain systems. Proc IMechE Part D: J Automob Eng 2004; 218(12): 1427–1446.

20.

Paffoni

Progri

Gras

. The hydrodynamic phase of gearbox synchromesh operation: the influence of radial and circumferential grooves. Proc IMechE Part J: J Eng Tribol 1997; 211(2): 107–116.

21.

Walker PD, Zhang N and Tamba R. Dynamics and simulations of shifting in a dual clutch transmission. In 6th Australasian congress on applied mechanics, Institute of Engineers Australia, Perth, Australia, 12–15 December 2010, paper no. ACAM-1110.