In this study, investigation results on the effect of heat treatment conditions on the mechanical properties, internal stresses, magnetic characteristics, and electrical resistivity of powder steel 50Ni2Mo are presented. Coercive force and maximum magnetization are shown to be applicable as magnetic test parameters to reveal underheating for quenching. Heating for quenching above the critical point up to 910°С has an insignificant effect on the mechanical characteristics of the steel tested. It has been demonstrated that the use of the coercive force measured on minor magnetic hysteresis loops is preferable when estimating the level of applied tensile stresses in heat-treated powder steel 50Ni2Mo.
GurevichY.RakhmanovV.Heat treatment ofpowder steels, 1985, p. 80 (Metallurgiya, Moscow) Russian.
2.
GorkunovE.UlyanovA.Magnetic techniques and devices for testing the quality of powder metallurgy products, 1996, p. 200 (Publishing House of UB RAS, Ekaterinburg) Russian.
3.
GorkunovE.ZadvorkinS.SmirnovS.MitropolskayaS.VichuzhaninD.Correlation between the stress-strain state parameters and magnetic characteristics of carbon steels. FMM, 2007, 13(3), 1–6. Russian.
4.
UlyanovA.SterkhovG.KorobeinikovaV.ErmolaevV.SidorovI.Nondestructive testing of the quality of heat-treated sintered steel 30NM. Poroshkov. Metallur., 1985, 8, 75–80. Russian.
5.
UlyanovA.FaizullinR.PetrovR.NovikovS.ArsentyevaN.Testing the quality of hardened sintered carbon steels by magnetic methods. Poroshkov. Metallur., 1991, 6, 83–87. Russian.
6.
UlyanovA.KorobeinikovaV.SterkhovG.SidorovN.The effect of porosity on the adequate magnetic testing of the quality of heat-treated sintered steels. Poroshkov. Metallur., 1987, 7, 45–49. Russian.
7.
UlyanovA.FaizullinR.PetrovR.Nondestructive technique for detecting fixed carbon in iron-carbon powder steel. Poroshkov. Metallur., 1994, 11–12, 51–54, Russian.
8.
RusakovA.Radiography of metals. Textbook for colleges and universities, 1977, p.480 (Atomizdat Russian, Moscow).
9.
LakhtinY.Physical metallurgy and heat treatment of metals, 1969, p. 446 (Metallurgiya, Moscow) Russian.
10.
GudremonE.Special steels, 1959, p. 952 (Metallurgizdat, Moscow) Russian.
11.
SchastlivtsevV.MirzaevD.YakovlevaI.OkishevK.TabatchikovaT.KhlebnikovaY.Pearlite in carbon steels, 2006, p. 311 (Publishing House of UB RAS, Ekaterinburg) Russian.
12.
BidaG.GorkunovE.ShevninV.Magnetic testing of the mechanical properties of rolling stock, 2002, p. 252 (Publishing House of UB RAS, Ekaterinburg) Russian.
13.
BlanterM.Phase transformations in steel during heat treatment, 1962, p. 268 (Metallurgizdat, Moscow) Russian.
14.
KurdyumovG.UtevskyL.EntinR.Transformations in iron and steel, 1985, p. 237 (Metallurgiya, Moscow) Russian.
15.
KerstenM.Zur Theorie der Koerzitivkraft. Zs Phys., 1948, 124, 714–742. German.
16.
MikheevM.GorkunovE.Magnetic methods of structural analyses and nondestructive testing, 1993, p. 252 (Nauka, Moscow) Russian.
17.
KuleevV.TsarkovaT.Peculiarities of steel coercivity as dependent on elastic tensile stresses after plastic deformations and heat treatment. FMM, 2007, 104(5), 479–486. Russian.
18.
KuleevV.TsarkovaT.NichipurukA.VoroninV.BergerI.Investigation into the reasons for essential differences in the values of coercive force, residual magnetization and initial magnetic permeability of loaded and unloaded ferromagnetic steels under plastic tension. FMM, 2007, 103(2), 136–146. Russian.
19.
GorkunovE.ZadvorkinS.MitropolskayaS.SubachevY.UlyanovA.Effect of elastic-plastic deformation on the magnetic characteristics of structural powder steel with different residual porosity. Russ. J. Nondestruct. Test., 2007, 43(12), 817–826.
