This study proposed a type of innovative imprint replica process technique, by first developing a magnetic-aided roller microtransfer replica process equipment, and then using polydimethylsiloxane soft mould composite magnetic powder to create a roller for transfer imprint. Using the advantage of the even pressing of a magnetic roller, a microstructure array was used in this innovative manufacturing process for transfer replication study. Research results showed that, the magnetic-aided roller microtransfer machine developed in this study could successfully transfer a roller structure to polycarbonate film, thus resulting in an imprint effect. This study successfully applied this innovative manufacturing technology on a rolling microstructure array, and examined its replicability.
DobrevT.DimovS. S.ThomasA. J.Laser milling: modelling crater and surface formation. Proc IMechE Part C J. Mech. Eng. Sci., 2006, 220(11), 1685–1696.
2.
WengY.-J.YangS.-Y.Applying magnetic soft mold imprint technology with ultraviolet light-emitting-diode array on the fabrication of microlens arrays. Polym. Adv. Technol., Accepted. Published Online: 12 Nov 2009. DOI : 10.1002/pat.1580.
3.
PhamD. T.IvanovA.BigotS.PopovK.DimovS. S.A study of micro EDM electrode wear. Proc IMechE Part C J. Mech. Eng. Sci., 2007, 221(5), 605–612.
4.
HuangT. -C.WuJ.-T.YangS.-Y.HuangP.-H.ChangS. -H.Direct fabrication of microstructures on metal roller using stepped rotating lithography and electroless nickel plating. Microelectron. Eng., 2009, 86, 615–618.
5.
PopovK. B.DimovS. S.PhamD. T.IvanovA.Micromilling strategies for machining thin features. Proc IMechE Part C J. Mech. Eng. Sci., 2006, 220(11), 1677–1684.
6.
JiangL.-T.HuangT. -C.CiouC. -R.ChangC.-Y.YangS.-Y.HuangP.-H.Direct fabrication of rigid microstructures on a metallic roller using a dry film resist. J. Micromech. Microeng., 2008, 18(1), 501–506.
Truffier-BoutryD.BeaurainA.GalandR.PelissierB.BousseyJ.ZelsmannM.XPS study of the degradation mechanism of fluorinated anti-sticking treatments used in UV nanoimprint lithography. Microelectron. Eng., 2010, 87, 122–122.
9.
YaoC. H.ChangC. H.HsiehC. W.SungC. K.Effects of mold shape and sidewall roughness on nanoimprint by molecular dynamics simulation. Microelectron. Eng., 2010, 87, 864–868.
10.
WengY. J.WengY. C.FangH. S.YangS. Y.Application of vacuum-assisted filling system with ultraviolet-light-emitting diode array to fabrication of waveguide microstructures. Jpn. J. Appl. Phys, 2009, 48, 116502–116502.
WengY. J.WengY. C.YangS. Y.WangL. A.Fabrication of optical waveguide devices using gas-assisted UV micro/nanoimprinting with soft mold. Polym. Adv. Technol., 2007, 18, 876–882.
13.
ChouS. Y.KeimelC.GuJ.Ultrafast and direct imprint nanostructures in silicon. Nature, 2002, 417, 835–837.
14.
WengY. J.YangS. Y.WengY. C.WangL. A.Fabrication of buried waveguide microstructure using gas-assisted micro/nanoimprinting with soft mold. Polym. Adv. Technol., 2007, 18, 993–998.
15.
JinH. C.AbelsonJ. R.ErhardtM. K.NuzzoR. G.Soft lithographic fabrication of an image sensor array on a curved substrate. J. Vac. Sci. Technol. B, 2004, 22, 2548–2551.
WengY. J.WengY. C.YangS. Y.Development and research for applying innovative magnetic soft mold imprinting techniques in microstructure component manufacturing. Polym. Adv. Technol., 2008, 19, 1177–1184.
18.
MartinJ. I.NoguesJ.LiuK.VicentJ. L.SchullerI. K.Ordered magnetic nanostructures: Fabrication and Properties J. Magn. Magn. Mater., 2003, 256, 449–501.
19.
WengY. J.WengY. C.YangS. Y.WongJ. L.A novel electromagnetism-assisted imprinting technology to replicate microstructures onto a large-area curved surface using a flexible magnetic mold. Polym. Adv. Technol., 2009, 20, 92–97.
WengY.-J.WengY.-C.Technological development of advanced asymmetric magnetic soft mold micro-imprint lithography. Polym. Plast. Technol. Eng., 2010/07, 49(07), 713–717.
22.
Pina-HernandezC.KimJ. S.GuoL. J.FuP.-F.High throughput and etch selective nanoimprinting and stamping based on fast thermal-curable polydimethysiloxanes Adv. Mater., 2007, 19, 1222–1227.
