Highly porous ultralightweight cellular metal foams with open cells have attractive mechanical, thermal, acoustic and other properties and are currently being exploited for hightemperature applications (e.g. acoustic liners for combustion chambers). In such circumstances, thermal radiation in the metal foam becomes a significant mechanism of heat transfer. This paper presents results from experimental measurements on radiative transfer in Fe-Cr-Al-Y (a steel-based high-temperature alloy) foams having high porosity (95 per cent) and different cell sizes, manufactured at low cost from the sintering route. The spectral transmittance and reflectance are measured at different infrared wavelengths ranging from 2.5 to 50 μ, which are subsequently used to determine the extinction coefficient and foam emissivity. The results show that the spectral quantities are strongly dependent on the wavelength, particularly in the short-wavelength regime (less than 25 μ). While the extinction coefficient decreases with increasing cell size, the effect of cell size on foam reflectance is not significant. When the temperature is increased, the total extinction coefficient increases but the total reflectance decreases. The effective radiative conductivity of the metal foam is obtained by using the guarded hot-plate apparatus. With the porosity fixed, the effective radiative conductivity increases with increasing cell size and increasing temperature.
LuT. J.StoneH. A.AshbyM. F.Heat transfer in open-celled metal foams. Acta Mater., 1998, 46, 3619–3635.
2.
LuT. J.ChenC.Thermal transport and fire retardance properties of cellular aluminium alloys. Acta Mater., 1999, 47, 1469–1485.
3.
CalmidiV. V.MahajanR. L.The effective thermal conductivity of high porosity fibrous metal foams. Trans. ASME. J. Heat Transfer, 1999, 121, 466–471.
4.
CalmidiV. V.MahajanR. L.Forced convection in high porosity metal foams. Trans. ASME. J. Heat Transfer, 2000, 122, 557–565.
5.
PaekJ. W.KangB. H.KimS. Y.HyunJ. M.Effective thermal conductivity and permeability of aluminium foam materials. Int. J. Thermophysics, 2000, 21, 453–464.
6.
BoomsmaK.PoulikakosD.On the effective thermal conductivity of a three-dimensionally structured fluid-saturated metal foam. Int. J. Heat Mass Transfer, 2001, 44, 827–836.
7.
BoomsmaK.PoulikakosD.The effects of compression and pore size variations on the liquid flow characteristics in metal foams. Trans. ASME. J. Fluid Engng, 2002, 124, 263–272.
8.
ZhaoC. Y.KimT.LuT. J.HodsonH. P.Modelling on thermal transport in cellular metal foams. In Proceedings of the 8th Joint AIAA-ASME Thermophysics and Heat Transfer Conference, St Louis, Missouri, June 2002, AIAA paper 2002–3014.
9.
ZhaoC. Y.KimT.LuT. J.HodsonH. P.Thermal transport in high porosity cellular metal foams. J. Thermophysics Heat Transfer, 2004 (in press).
10.
LuT. J.Ultralight porous metals: From fundamentals to applications. Acta Mechanica Sinica, 2002, 18, 457–479.
11.
EvansA. G.HutchinsonJ. W.AshbyM. F.Multifunctionality of cellular metal systems. Prog. Mater. Sci., 1999, 43, 171–221.
12.
KimT.FullerA. J.HodsonH. P.LuT. J.An experimental study on thermal transport in lightweight metal foams at high Reynolds numbers. In Proceedings of the International Symposium on Compact Heat Exchangers, Grenoble, France, 2002, pp. 227–232.
13.
HaackD.ButcherK.KimT.HodsonH. P.LuT. J.Novel lightweight metal foam heat exchanger. Heat Exchangers Applications for Change of Phase Media and Fuel Cells Systems. In Proceedings of the ASME International Mechanical Engineering Congress and Exposition Book 100548, 2001, PID-4B-Vol. 3 (American Society of Mechanical Engineers, New York).
14.
HuntM. L.TienC. L.Effects of thermal dispersion on forced convection in fibrous media. Int. J. Heat Mass Transfer, 1988, 31, 301–309.
15.
YounisL. B.ViskantaR.Experimental determination of the volumetric heat transfer coefficient between stream of air and ceramic foam. Int. J. Heat Mass Transfer, 1993, 36, 1425–1434.
16.
LeeY. C.ZhangW.XieH.MahajanR. L.Cooling of a FCHIP package with 100 w, 1 cm2 chip. In Proceedings of the 1993 ASME International Electronic Packaging Conference, Vol. 1, 1993, pp. 419–423 (American Society of Mechanical Engineers, New York).
17.
KimS. Y.PaekJ. W.KangB. H.Flow and heat transfer correlations for porous fin in a plate-fin heat exchanger. J. Heat Transfer, 2000, 122, 572–578.
18.
SatheS. B.PeckR. E.TongT. W.A numerical analysis of heat transfer and combustion in porous radiant burners. Int. J. Heat Mass Transfer, 1990, 33 (6), 1331–1338.
19.
TongT. W.SatheS. B.PeckR. E.Improving the performance of porous radiant burners through use of submicron size fibers. Int. J. Heat Mass Transfer, 1990, 33 (6), 1339–1346.
20.
ZhaoC. Y.LuT. J.HodsonH. P.JacksonJ. D.The temperature dependence of effective thermal conductivity of open-celled steel alloy foams. Mater. Sci. Engng, 2004, A367, 123–131.
21.
TongT. W.TienC. L.Analytical models for thermal radiation in fibrous media, J. Thermal Insulation, 1980, 4, 27–44.
22.
TongT. W.TienC. L.Radiative transfer in fibrous insulations. Part I: Analytical study. J. Heat Transfer, 1983, 105 (1), 70–75.
23.
LeeS. C.Radiative transfer through a fibrous medium: Allowance for fiber orientation. J. Quantitative Spectrosc. Radiative Transfer, 1986, 36 (3), 253–263.
24.
LeeS. C.Radiation heat transfer model for fibers oriented parallel to diffuse boundaries. J. Thermophysics Heat Transfer, 1988, 2 (4), 303–308.
25.
LeeS. C.Effect of fiber orientation on thermal radiation in fibrous media. Int. J. Heat Mass Transfer, 1989, 32 (2), 311–319.
26.
DoermannD.SacaduraJ. F.Heat transfer in open cell foam insulation. J. Heat Transfer, 1996, 118, 88–93.
27.
BaillisD.RaynaudM.SacaduraJ. F.Spectral radiative properties of open-cell foam insulation. J. Thermophysics Heat Transfer, 1999, 13 (3), 292–298.
28.
BaillisD.RaynaudM.SacaduraJ. F.Determination of spectral radiative properties of open cell foam: Model validation. J. Thermophysics Heat Transfer, 2000, 14 (2), 137–143.
29.
GlieksmanL. R.SchuetzM.SinofskyM.Radiation heat transfer in foam insulation. Int. J. Heat Mass Transfer, 1987, 30 (1), 187–197.
30.
GlicksmanL. R.MargeA. L.MorenoJ. D.Radiation heat transfer in cellular foam insulation. In Developments in Radiative Heat Transfer, 1992, HTD-Vol. 203, pp. 45–54 (American Society of Mechanical Engineers, New York).
31.
KuhnJ.EbertH. P.Arduini-SchusterM. C.ButtnerD.FrickeJ.Thermal transport in polystyrene and polyurethane foam insulations. Int. J. Heat Mass Transfer, 1992, 35 (7), 1795–1801.
32.
LeeS. C.CunningtonG. R.Heat transfer in fibrous insulations: Comparison of theory and experiment. J. Thermophysics Heat Transfer, 1998, 12 (3), 297–303.
33.
LeeS. C.CunningtonG. R.Conduction and radiation heat transfer in high-porosity fiber thermal insulation. J. Thermophysics Heat Transfer, 2000, 14 (2), 121–136.
34.
CapsR.HeinemannU.FrickeJ.Thermal conductivity of polyimide foams. Int J. Heat Mass Transfer, 1997, 40 (2), 269–280.
35.
ClarkeF. J. J.LarkinJ. A.Measurement of total reflectance, transmittance and emissivity over the thermal IR spectrum. Infrared Physics, 1985, 25(1–2), 359–367.
36.
ChunnilallC. J.ClarkeF. J. J.ShawM. J.Diffuse reflectance scales at NPL, 2003 (in preparation).
