In this paper a solution method is presented for the transient isothermal elastohydrodynamic lubrication of point contact conjunctions, based upon the Newton-Raphson scheme and low iteration relaxation. The numerical results are compared with the numerical and experimental observations of others for the circular point contact of a ball against a flat glass disc under oscillating conditions. Good agreement has been found with other numerical solutions. The comparison with the experimental results shows good qualitative agreement.
ChristensenH.The oil film in a closing gap. Proc. R. Soc. (Lond.) A. Math. Phys. Sci., 20 March 1962, 266(1326), 312–328.
2.
HerrebrughK., Elastohydrodynamic squeeze between two cylinders in normal approach. Trans. ASME, J. Lubric. Technol., April 1970, 92(2), 292–302.
3.
ChristensenH.Elastohydrodynamic theory of spherical bodies in normal approach. Trans. ASME, J. Lubric. Technol., January 1970, 92(1), 145–164.
4.
ConwayH. D.The rate of change of film thickness in the elastohydrodynamic squeeze film process. Trans. ASME, J. Lubric. Technol., 1973, 95, 391.
5.
LeeK. M.ChengH. S.The pressure and deformation profiles between two normally approaching lubricated cylinders. Trans. ASME, J. Lubric. Technol., 1973, 95, 308–317.
6.
BedewiM. A. A.DowsonD.TaylorC. M.The squeeze-film lubrication of ellipsoids. J. Phys., D: Appl. Phys., 1992, 25, A133–A140.
7.
RahnejatH.Influence of vibration on the oil film in concentrated contacts. PhD thesis, Imperial College of Science and Technology, 1984.
8.
RahnejatH.Computational modelling of problems in contact dynamics. J. Engng Analysis, 1985, 2(4), 192–197.
9.
MostofiA.GoharR.Oil film thickness and pressure distribution in elastohydrodynamic point contacts. Trans. ASME, J. Lubric. Technol., April 1982, 24(4), 173–182.
10.
RahnejatH.GoharR.The vibrations of radial ball bearings. Proc. Instn Mech. Engrs, Part C, Journal of Mechanical Engineering Science, 1985, 199(C3), 181–193.
11.
DowsonD.WangD.An analysis of the normal bouncing of a solid elastic ball on a oily plate. Wear, 1994, 179(1-2), 29–37.
12.
SafaM.GoharR.Pressure distribution under a ball impacting a thin lubricant layer. Trans. ASME, J. Lubric. Technol., 1986, 108(3), 372–376.
13.
WijnantY. H.VennierC. H.Analysis of an EHL circular contact incorporating rolling element vibration. In Proceedings of 23rd Leeds-Lyon Symposium on Tribology, September 1996, pp. 445–456 (Elsevier).
14.
AiX. L.YuH. Q.A full numerical solution for general transient elastohydrodynamic line contacts and its application. Wear, 1988, 121, 143–159.
15.
RenN.ZhuD.WenS. Z.Experimental method for quantitative analysis of transient EHL. Tribology Int., 1991, 24(4), 225–230.
16.
OhK.P.The numerical solution of dynamically loaded elastohydrodynamic contact as a nonlinear complementarity problem. Trans. ASME, J. Tribology, 1984, 106, 88–95.
17.
JohnsonK. L.Contact Mechanics, 1985, Ch. 3, p. 54 (Cambridge University Press).
18.
DowsonD.HigginsonG. R.A numerical solution to the elastohydrodynamic problem. J. Mech. Engng Sci., 1959, 1, 6–15.
19.
RoelandsC. J. A.Correlation aspects of viscosity-temperature-pressure relationship of lubricating oils. PhD thesis, Delft University of Technology, The Netherlands, 1966.
