In this paper the dynamical behaviour of a flexible part and an actively controlled fixture system is studied. Four active clamps are used for the control of the part-fixture system. Advanced finite element (FE) analyses have been carried out to model the part and the adaptive clamps. An accurate small-sized model of the part is established using the Craig—Bampton reduction method. A second-order model has been established for the adaptive clamps on the basis of the FE model. The supports and part-fixture contacts are modelled as spring-dashpot elements. Piezoelectric actuators are utilized to provide the forces required for the adaptive clamping scheme. A model-based control architecture has been incorporated and proportional—integral (PI) controllers are established for the individual clamps. After investigating the performance of the controllers for dynamic compensation, analysis shows that PI control can be used effectively to minimize the reaction forces on the supports, induced by deflection caused by machining forces.
NeeA. Y. C.TaoZ. J.Senthil KumarA.Advanced treatise on fixture design and planning Series on Manufacturing Systems and Technology, 2004 (World Scientific Publishing Company, Singapore).
KlärnerM.LeopoldJ.KrollL.Analysis of clamping within a fixing system. In (Eds XiongC.LiuHHuangYXiongY.). Lecture Notes in Computer Science, Intelligent Robotics and Applications2008 (Springer-Verlag, (Berlin/ Heidelberg). 356–367.
4.
BehzadiM. R.ArezooB.Static and dynamic models for predicting the effects of supports on machining flatness and roughness. Proc. IMechE, Part B: J. Engineering Manufacture2002, 216(5), 735–742 DOI: 10.1243/0954405021520427.
5.
DeiabI. M.ElbestawiM. A.Effect of workpiece/fixture dynamics on the machining process output. Proc. IMechE, Part B: J. Engineering Manufacture2004, 218(11), 1541–1553 DOI: 10.1243/0954405042418455.
6.
AsanteJ. N.A small displacement torsor model for tolerance analysis in a workpiece-fixture assembly. Proc. IMechE, Part B: J. Engineering Manufacture2009, 223(8), 1005–1020 DOI: 10.1243/09544054JEM1337.
7.
LiaoY. G.HuS. J.An integrated model of a fixture-workpiece system for surface quality prediction. Int. J. Advd. Mf. Technol.2001, 17, 810–818.
8.
NeeA. Y. C.Senthil KumarA.TaoZ. J.An intelligent fixture with a dynamic clamping scheme. Proc. IMechE, Part B: J. Engineering Manufacture2000, 214, 183–196.
9.
GaoY.ZhangD.YuC. W.Dynamic modeling of a novel workpiece table for active surface grinding control. Int. J. Mach. Tools Mf.2001, 41, 609–624.
10.
ZhangD.ChetwyndD. G.LiuX.TianY. Y.Investigation of a 3-DOF micro-positioning table for surface grinding. Int. J. Mech. Sci.2006, 48, 1401–1408.
11.
AbeleE.HanselkaH.HaaseF.SchloteD. SSchifflerA.Development and design of an active work piece holder driven by piezo actuators. Prod. Engng. Res. Dev.2008, 2(4), 437–442.
12.
RashidA.NicolescuC. M.Active vibration control in palletised workholding system for milling. Int. J. Mach. Tools Mf.2006, 46, 1626–1636.
13.
CulpepperM. L.VaradarajanK. M.DiBiasioC., Design of integrated eccentric mechanisms and exact constraint fixtures for micron-level repeatability and accuracy. Precision Engng2005, 29, 65–80.
14.
DaimonM.YoshidaT.KojimaN.YamamotoH.HoshiT.Study for designing fixtures considering dynamics of thin-walled plate- and box-like workpieces. CIRP Annls Mf. Technol.1985, 34(1), 319–322.
15.
MittalR. O.Cohen GilmoreB. J.Dynamic modeling of the fixture-workpiece system. Robotics Computer Integ. Mfg1991, 8(4), 201–217.
16.
ShawkiG. S. A.Abdel-AalM. M.‘Rigidity considerations in fixture design - contact rigidity at locating elements’Int. J. Mach. Tool Des. Res.1996, 6, 31–43.
17.
ShawkiG. S. A.Abdel-AalM. M.Rigidity considerations in fixture design - rigidity of clamping elements. Int. J. Mach. Tool Des. Res.1966, 6, 207–209.
18.
RatchevS.PhuahK.LiuS.‘FEA-based methodology for the prediction of part fixture behaviour and its applications’J. Mater. Processing Technol.2007, 191, 260–264.
19.
YehJ. H.LiouF. W.Contact condition modelling for machining fixture setup processes. Int. J. Mach. Tools Mf.1999, 39, 787–803.
BakkerO. J.PopovA. A.RatchevS. M.Fixture control by hydraulic actuation using a reduced workpiece model. Proc. IMechE, Part B: J. Engineering Manufacture2009, 223(12), 1553–1566 DOI: 10.1243/09544054JEM1540.
22.
BakkerO. J.PopovA. A.RatchevS. M.Model-based control of an advanced actuated part-fixture system. Proceedings of 2009 ASME International Manufacturing Science and Engineering Conference2009, MSEC2009-84175 (ASME, New York).
23.
LeopoldJ.ClauβD.KlärnerM.PoppitzA.BaldoliM.MerloA.GiménezM.LarranagaJ.Investigations to new fixturing principles for aerospace structures. International Conference on Applied Production Technology, (Ed. VollertsenF.) 2007, pp. 173–189 (BIAS, Bremen).
24.
LeopoldJ.PoppitzA.KlärnerM.SchmidtA.-K.BergerJ.Interaction between machining and new fixturing principles for aerospace structures. Int. J. Mater. Forming2008, 1, 531–533, ESAFORM2008 Conference on Material forming. Lyon, France, Symposium MS09: machining and cutting.
25.
TimoshenkoS. P.GoodierJ. N.Theory of elasticity Engineering Mechanics Series, International Edition, 1970 (McGraw-Hill, Singapore).
26.
CraigR.R.Jr.BamptonM. C. C.The coupling of substructures for dynamic analyses. AAIA Journal1968, 6(7), 1313–1319.
27.
CraigR.RJr.KurdilaA. J.Fundamentals of structural dynamics2006, (Wiley, Hoboken, NJ.).
IEEE Standard on Piezoelectricity, ANSI/IEEE Std 176-1987, 1988.
30.
GiurgiutiuV.LyshevskiS. E.Micromechatronics: modeling, analysis, and design with Matlab®2009, (CRC Press, Boca Raton, Fl).
31.
MoheimaniS. O. R.FlemingA. J.Piezoelectric transducers for vibration control and damping, Advances in industrial control2006 (Springer-Verlag, London).
32.
AdriaensH. J. M. T. A.de KoningW. L.BanningR.Modeling piezoelectric actuators. IEEE-ASME Trans. Mechatrononics2000, 5(4), 331–341.
33.
GoldfarbM.CelanovicN.Modeling piezoelectric stack actuators for control of micromanipulation. IEEE Control Systems1997, 17(3), 69–79.
