Abstract
Carbon fiber reinforced polymer (CFRP) material has superior mechanical properties, often utilized in the aerospace industry. However, its prone to surface defects such as burrs and delamination under the influence of machining vibration, thereby compromising component quality. This study evaluated the relevant vibration signal features via signal processing methods, and investigated the effect of machining parameters on machining stability during robotic milling of CFRP composite. Specifically, the study assessed machining status by analyzing milling signals and compared surface quality between vibration and stable machining stages, the former corresponds to a larger Sa on the machined surface, with more pronounced profile fluctuations. Machining vibration manifests distinct characteristics in laser vibrometer signals, exhibiting in time-frequency plots with short-term signal enhancements at multiple frequencies. This phenomenon occurs more frequently during entry and exit stages. The results indicated that feed speed has a limited effect on milling stability within the selected parameter range, and severe machining vibration occurred at lower spindle speed (12,000 rpm) and higher milling depth (2 mm). Corresponding surface defects formation mechanisms were discussed, revealing that the formation of uncut burrs at the top was related to axial milling force, while interlayer debonding cracks stemmed from variations in fiber orientation between adjacent layers.
Get full access to this article
View all access options for this article.