The preload relaxation is always caused by elastic interaction in the process of the wind turbine bolt tightening. To address the problem, the effects of the initial preload level, the tightening sequence on the preload are investigated based on theory calculation and finite element (FE) analysis. Moreover, this study proposes a preload optimization method based on the improved elastic interaction coefficient method (EICM), and the effectiveness of the method is verified by using FE analysis. The result shows that the improved EICM can be employed to analyze the interaction between the bolts, predict the variation of preload and confirm the initial preload that satisfies the pre-tighting conditions, as well as improve the practicality of the EICM and the calculation efficiency.
ZhangYLiHQinX, et al. Analysis of vibration response and machining quality of hybrid robot based UD-CFRP trimming. Proc IMechE, Part B: J Engineering Manufacture2021; 235(6-7): 974–986.
2.
GongHLiuJDingX. Study on the mechanism of preload decrease of bolted joints subjected to transversal vibration loading. Proc IMechE, Part B: J Engineering Manufacture2019; 233(12): 2320–2329.
3.
YaoCFMaLFDuYX, et al. Surface integrity and fatigue behavior in shot-peening for high-speed milled 7055 aluminum alloy. Proc IMechE, Part B: J Engineering Manufacture2017; 231(2): 243–256.
4.
ChenCFanSQHanXL, et al. Experimental research on the compressed joints with different geometrical parameters. Proc IMechE, Part B: J Engineering Manufacture2019; 233(1): 174–181.
5.
Van CampenDH. A systematic bolt-tighting procedure for reactor vessel flanges. Delft, The Netherlands: Univ. of Tech, 1969.
6.
BibelGDEzellRM. An improved flange bolt-up procedure using experimentally determined elastic interaction coefficients. J Press Vessel Technol1992; 114(4): 439–443.
7.
TakakiTFukuokaT. Effective bolting up procedure using finite element analysis and elastic interaction coefficient method. In: Proceedings of the ASME/JSME 2004 Pressure vessels and piping conference. Analysis of bolted joints, San Diego, CA, 25–29 July 2004, pp.155–162. New York, NY: ASME.
8.
AlkelaniAANassarSAHousariBA. Formulation of elastic interaction between bolts during the tightening of flat-face gasketed joints. J Mech Design2009; 131(2): 519–528.
9.
WangYQWuJKLiuHB, et al. Modeling and numerical analysis of multi-bolt elastic interaction with bolt stress relaxation. Proc IMechE, Part C: J Mechanical Engineering Science2016; 230(15): 2579–2587.
10.
WangYQWuJKLiuHB, et al. Analysis of elastic interaction stiffness and its effect on bolt preloading. Int J Mech Sci2017; 130: 307–314.
11.
FukuokaTTakakiT. Finite element simulation of bolt-up process of pipe flange connections. J. Press Vessel Technol2001; 123(3): 282–287.
12.
CoriaIAbasoloMOlaskoagaI, et al. A new methodology for the optimization of bolt tightening sequences for ring type joints. Ocean Eng2017; 129: 441–450.
13.
BasavaSHessDP. Bolted joint clamping force variation due to axial vibration. J Sound Vib1998; 210(2): 255–265.
14.
NassarSAGanganalaM. Effect of separating load eccentricity on the clamp load loss in a bolted joint using a strain hardening model. J Press Vessel Technol2011; 133(2): 021206.
15.
LiuJOuyangHPengJ, et al. Experimental and numerical studies of bolted joints subjected to axial excitation. Wear2016; 346: 66–77.
16.
YuGAQinZWRongXM, et al. Effects of defects on connection performance forwind turbine blades. Acta Energ Sol Sin2019; 40(11): 3244–3249.
17.
ShiWBDuJGongGW. Fatigue damage analysis of bolts connection between mainshaft and flange on wind turbine. Mach Design Manuf2020; 350(4): 233–236.
18.
YingHDLiuHWChenZY, et al. Fracture failure analysis and optimization of blade bolts in large wind turbine. J Mech Electr Eng2021; 38(2): 216–221.
19.
AljubouryMRizviMJGroveS, et al. Manufacturing and development of a bolted GFRP flange joint for oil and gas applications. Proc IMechE, Part B: J Engineering Manufacture2021; 235(9): 1507–1517.
20.
QinXCaoXLiH, et al. Effects of countersunk hole geometry errors on the fatigue performance of CFRP bolted joints. Proc IMechE, Part B: J Engineering Manufacture2022; 236(4): 337–347.
21.
LiuBYanCWangH. Effects of countersunk hole’s geometrical deviation on the strength of bolted carbon fiber–reinforced plastic/polymer metal joints under tensile loading. Proc IMechE, Part B: J Engineering Manufacture2020; 234(3): 621–628.
22.
OuyangHOldfieldMJMottersheadJE. Experimental and theoretical studies of a bolted joint excited by a torsional dynamic load. Int J Mech Sci2006; 48(12): 1447–1455.
23.
DaoukSLoufFCluzelC, et al. Study of the dynamic behavior of a bolted joint under heavy loadings. J Sound Vib2017; 392: 307–324.
24.
YangFLLiZZhangDC, et al. Experimental study on the transversal vibration of double-nut bolted joints of transmission towers. J Vib Shock2018; 37: 164–171.
25.
LiYLiuZWangY, et al. Research on preload of bolted joints tightening sequence-related relaxation considering elastic interaction between bolts. J Constr Steel Res2019; 160: 45–53.
26.
BraithwaiteJMehmanparastA. Analysis of tightening sequence effects on preload behaviour of offshore wind turbine M72 bolted connections. Energies2019; 12(23): 4406.
27.
WuC. Measurement and control for pre-tightening force of bolts in wind turbine based on the method of ultrasound. J Mech Electr2020; 299(1): 84–88.
