In this paper the performances of different cutting fluids and grinding wheel types were analysed in the grinding of SAE HVN-3 workpieces. The resulting residual stress, wheel wear and roughness were evaluated. The influence of the cutting fluid jet velocity vj was also analysed. As a conclusion, the lubrication ability seems to be the governing factor in the cutting fluid performance. The use of CBN wheels can significantly reduce the thermal damage in grinding, leading to compressive residual stresses. The CBN wheel and the cutting oil give an optimum combination for performing this grinding operation.
MoulikP. N.YangH. T. Y.ChandrasekarS.Simulation of thermal stresses due to grinding. Int. J. Mech. Sci., 2001, 43, 831–851.
2.
ShawM. C.Grinding temperatures. In Proceedings of the 12th North American Research Conference, 1984, p. 304 (Society of Manufacturing Engineers, Dearborn, Michigan).
3.
ChenX.RoweW. B.McCormackD. F.Predicting the transitional boundary of tensile residual stress in grinding. Abrasives Mag., February-March 2000, 28–35.
4.
SnoyesR.PetersJ.Thermally induced damage in grinding. Ann. CIRP, 1978, 27(2), 571–581.
5.
PetersJ.Contribution of CIRP research to industrial problem in grinding. Ann. CIRP, 1984, 32(2), 451–468.
6.
RoweW. B.MorganM. N.BlackS. C. E.MillsB.A simplified approach to control of thermal damage in grinding. Ann. CIRP, 1996, 45(1), 299–302.
7.
WebsterJ. A.Selection of coolant type and application technique in grinding. In Supergrind 1995, November 1995, pp. 205–218 (University of Connecticut and the Industrial Diamond Association).
8.
HitchinerM. P.Precision grinding systems for production grinding with vitrified CNB. SME Technical Paper MR90-507, 1990, pp. 1–11.
9.
MalkinS.Grinding mechanisms and grinding temperatures and thermal damage. In Grinding Technology: Theory and Applications of Machining with Abrasives, 1st edition, 1989, pp. 108–171 (Ellis Horwood, Chichester, West Sussex).
10.
LavineA. S.MalkinS.The role of cooling in creep-feed grinding. Int. J. Advd Mfg Technol., 1990, 5, 99–111.
11.
YasuiH.TsukudaS.Influence of fluid type on wet grinding temperature. Bull. Japan Soc. Precision Engng, 1983, 2(17), 133–134.
12.
RouseH.AsceM.HoweJ. W.MetzlerD. E.Experimental Investigation of Fire Monitors and Nozzles, 117th ASCE Transactions, 1952 (American Society of Civil Engineers, New York).
13.
WebsterJ. A.Optimization of coolant flowrate, pressure and nozzle design in high productivity grinding processes. In Proceedings of the International Manufacturing Technology Show (IMTS 2002), Chicago, Illinois, 4–11 September 2002, p. 53 (Society of Manufacturing Engineers, Dearborn, Michigan).
14.
KlockeF.BausA.BeckT.Coolant induced forces in high-speed grinding with shoe nozzles. Ann. CIRP, 2000, 49(1), 241–244.
15.
WebsterJ. A.CiuC.Flow rate and jet velocity determination for design of a grinding cooling system. In Proceedings of the 1st International Machining and Grinding Conference, Dearborn, Michigan, 1995, p. 23.
16.
MindekR. B.WebsterJ. A.Minimizing thermal damage of aerospace components using coolant nozzle and coolant system optimization. In Proceedings of the 5th International Gas Turbine Institute of the ASME, Oregon, 1994.
17.
AndrewC.HowesT. D.PearceT. R. A.Creep-feed Grinding, 1985 (Industrial Press, New York).
18.
PowellJ. W.Application of grinding fluid in creep-feed grinding, PhD thesis, University of Bristol, 1979.
19.
KohliS. P.GuoC.MalkinS.Energy partition for grinding with aluminum oxide and CBN abrasive wheels. Trans. ASME, J. Engng for Industry, 1995, 117, 160–168.
20.
MalkinS.Current trends in CBN grinding technology. Ann. CIRP, 1985, 34(1), 557–560.
21.
BrinksmeierE.CammettJ. T.KönigW.LeskovarP.PetersJ.TönshoffH. K.Residual stresses–measurement and causes in machining processes. Ann. CIRP, 1982, 31(2), 491–510.
22.
TönshoffH. K.GrabnerT.Cylindrical and profile grinding with boron nitride wheels. In Proceedings of the 5th International Conference on Production Engineering, Tokyo, Japan, 1984, pp. 326–343.
23.
VansevenantI. R. E.An improved mathematical model to predict residual stresses in surface plunge grinding. Ann. CIRP, 1989, 36, 413–416.
24.
SAE J784a Residual Stress Measurement by X-ray Diffraction, 2nd edition, 1971, pp. 1–119 (Society of Automotive Engineers, New York).
25.
LealJ.La Filtración en los processes de retificado com muelas de borazon. Filtration News, 1993, VIII, 1–8.
26.
CariusA.Effects of fluid type and delivery on CBN wheel performance. In Proceedings of the Modern Grinding Technology Conference, 10–12 October 1989 (Society of Manufacturing Engineers, Dearborn, Michigan).
27.
KumarK. V.IshikawaT.KoskeyJ.Superabrasive grinding of superalloys. SME Technical Paper MR91-216, 1991, pp. 1–16.
