Blends of Nitrile Polymers and Polar Moieties Containing Polyolefins

Abstract

The phase behaviour of blends of poly(acrylonitrile:methyl acrylate: butadiene) (B210) and polyolefins modified with polar groups, either by copolymerization or grafting reactions, was examined using differential scanning calorimetry (DSC). Enhanced or complete miscibility was attained by synthetically incorporating molecular features which promote intermolecular attraction. Miscibility over the entire range of compositions was found for binary blends of B210 and poly(ethylene-co-maleic anhydride) (PEMA). For other blends such as B210 and poly(propylene-g-acrylic acid) (PP-g-AcA) or poly(ethylene-g-maleic anhydride) (PE-g-MA), miscibility was limited to the amorphous phase. Several equations commonly used in the literature to express the glass transition temperature-composition relationship have been applied to describe the miscible blend systems. Gordon-Taylor and Kwei equations best represent the T_g data of these polymer mixtures. The deviation from linearity of both experimental and predicted values was attributed to the existence of specific intermolecular interactions between the constituents of the individual polymer chains. This work has shown that it is possible to combine the desirable features of polyolefins (low permeability to moisture) and acrylonitrile-based polymers (good gas barrier properties) by creating a miscible blend through molecular modification.

Get full access to this article

View all access options for this article.

References

1. D.R. Paul , in Multicomponent Polymer Materials, Advances in Chemistry Series 211, p. 3, D.R. Paul and L.H. Sperling , Eds., ACS, Washington, D.C. (1986).

2. P.M. Subramanian and V. Mehra , Polym. Eng. Sci., 27, 663 (1987).

3. S. Krause , in Polymer Blends, D.R. Paul and S. Newman , Eds., Academic Press, New York, 1987.

4. A.L. Brody , in Encycl. Polym. Sci. Eng., Vol. 10, p. 710, H.F. Mark , N.M. Bikales , C.G. Overberger and G. Menges , Eds., John Wiley & Sons Inc., New York (1987).

5. O. Olabisi , L.M. Robeson and M.T. Shaw , in Polymer Miscibility, p. 19, Academic Press, New York (1979).

6. G. Ruggeri , M. Aglietto , A. Petragnani and F. Ciardelli , Eur. Polym. J., 19, 863 (1983).

7. M. Aubin and R.E. Prud'homme , Macromolecules, 13, 365 (1980).

8. G. DeVito , N. Lanzetta , G. Maglio , M. Malinconico , P. Musto and R. Palumbo , J. Polym. Sci. Chem. Ed., 22, 1335 (1984).

9. M. Gordon and J.S. Taylor , J. Appl. Chem., 2, 495 (1952).

10.

10. T.G. Fox , Bull. Am. Phys. Soc.; 1, 123 (1956).

11.

11. T.K. Kwei , J. Polym. Sci., Polym. Lett. Ed., 22, 307 (1984).

12.

12. J.M. Rodriguez-Parada and V. Percec , Macromolecules, 19, 55 (1986).

13.

13. C. Pugh and V. Percec , Macromolecules, 19, 65 (1986).

14.

14. T.K. Kwei , E.M. Pearce , J.R. Pennachia and M. Chartoon , Macromolecules, 20, 1174 (1987).

15.

15. G. Fairley and R.E. Prud'homme , Polym. Eng. Sci., 27, 1495 (1987).