Abstract
2,7-Diphenyloxynaphthalene with large conjugated structure has been introduced into the main chain of silicon-containing arylacetylene resin and then poly(dimethylsilylene-ethynylenephenoxynaphthyloxyphenylene-ethynylene) (m-PPNSA-MM) was synthesized. The m-PPNSA-MM resin shows good solubility and a wide processing window. A stable three-dimensional cross-linking network formed due to thermal crosslinking reactions of acetylene groups and intermolecular π–π stacking interactions after m-PPNSA-MM was cured through the process of 180°C/2 h + 220°C/2 h + 260°C/4 h. The flexural strength and modulus of the cured m-PPNSA-MM resin at room temperature are 49.2 MPa and 2.75 GPa, respectively. The cured m-PPNSA-MM resin show high thermal stabilities, the 5% temperature of weight loss (Td5) reaches 560°C in nitrogen.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
