A new diamine containing an imidazole structure, 4,4′-(4,5-diphenyl-1H-imidazole-1,2-diyl)dianiline (DIMA), was synthesized to prepare photoconductive polyimides (PIs) with four types of dianhydrides such as 3,3′,4,4′-biphenyltetracarboxylic dianhydride, 4,4′-oxyduphthalic anhydride, 4,4′-(hexafluoroisopropylidene) diphthalic anhydride, and cyclobutane-1,2,3,4,-tetracarboxylic dianhydride, based on the fact that the imidazole ring is a useful n-type block with high electron-donating property and good thermal stability. The imidazole-containing diamine possesses high electron-donating properties due to the lone pair electrons at nitrogen, which affords a high hole-transport property. All the PIs prepared from DIMA were amorphous due to the large side group and kink structure of the diamine, optically transparent (transmittances of 92–98% at 450 nm), and exhibited high thermal stability (10% weight loss temperatures ranged 453–558°C).
QinSQiuSCuiM, et al.Synthesis and properties of polyimide nanocomposite containing dopamine-modified graphene oxide. High Perform Polym2019; 31(3): 331–340.
2.
TanJHuangJLiuY, et al.Novel high-barrier polyimide containing rigid planar dibenzofuran moiety in main chain. High Perform Polym2018; 30(5): 539–548.
3.
IsodaSShimadaHKochiM, et al.Molecular aggregation of solid aromatic polymers. I. Small-angle x-ray scattering from aromatic polyimide film. J Polym Sci B Polym Phys1981; 19: 1293–1473.
4.
YenHJChenCJLiouGS. Flexible multi-colored electrochromic and volatile polymer memory devices derived from starburst triarylamine-based electroactive polyimide. Adv Funct Mater2013; 23: 5307–5316.
5.
LingQDLiawDJZhuC, et al.Polymer electronic memories: materials, devices and mechanisms. Prog Polym Sci2008; 33: 917–978.
6.
AleksandrovaELNosovaGIRomashkovaKA, et al.New photosensitive polyimide composites for optical technologies. J Opt Technol2002; 69: 70–710.
7.
MeierHAlbrechtWHanackM. Correlations between photoconductivity and molecular structure of bridged polymeric phthalocyanines. Mol Cryst Liq Cryst1991; 194: 75–83.
8.
GiangHNKinashiKSakaiW, et al.Triphenylamine photoconductive polymers for high performance photorefractive devices. J Photoch J Photobio A2014; 291: 26–33.
9.
YangYJinPLiuJ, et al.Ternary memory property of novel polyimide with backbone carbazole moiety and pendant triphenylamine moiety. High Perform Polym2019; 31(6): 640–650.
10.
SvetlichnyiVAleksandrovaELMatyushinaNV. Molecular design of optoelectronic structures based on carbazole- and indolocarbazole-containing polyphenylquinolines. High Perform Polym2017; 29(6): 730–749.
11.
GhaemyMAlizadehR. Synthesis of soluble and thermally stable polyimides from unsymmetrical diamine containing 2, 4, 5-triaryl imidazole pendent group. Eur Polym J2009; 45: 1681–1688.
12.
ZhaoHYuanWZTangL, et al.Hybrids of triphenylamine-functionalized polyacetylenes and multiwalled carbon nanotubes: High solubility, strong donor−acceptor interaction, and excellent photoconductivity. Macromolecules2008; 41: 8566–8574.
13.
TsutsumiNMuraoTSakaiW. Photorefractive response of polymeric composites with pendant triphenylamine moiety. Macromolecules2005; 38: 7521–7523.
14.
GhaemyMMovagharnezhadN. Synthesis and properties of polyimides derived from a new diamine containing bulky-flexible pendent group. Polym Sci Ser B2011; 53: 332–340.
15.
DebusHLiebigsS. Synthesis of 2, 2’-imidazole. Liebigs Ann Chem1858; 107: 199–208.
16.
LindnerJP. Imidazolium-based polymers via the poly-Radziszewski reaction. Macromolecules2016; 49: 2046–2053.
17.
MaHZhangZJinY, et al.Triphenylamine-decorated BODIPY fluorescent probe for trace detection of picric acid. RSC Adv2015; 5: 87,157–87,167.
18.
ShibanoYUmeyamaTMatanoY, et al.Electron-donating perylene tetracarboxylic acids for dye-sensitized solar cells. Org Lett2007; 9: 1971–1974.
19.
ChenDSuSJCaoYJ. Nitrogen heterocycle-containing materials for highly efficient phosphorescent OLEDs with low operating voltage. J Mater Chem C2014; 2: 9565–9578.
20.
AloisiGGPignataroS.Molecular complexes of substituted thiophens with σ and π acceptors. Charge transfer spectra and ionization potentials of the donors. J Chem Soc1973; 1: 34–539.
21.
KangETEhrlichPBhattAP, et al.Photoconductivity in trans-poly (phenylacetylene) and its charge-transfer complexes. Macromolecules1984; 17: 1020–1024.
22.
LiWSYamamotoYFukushimaT, et al.Amphiphilic molecular design as a rational strategy for tailoring bicontinuous electron donor and acceptor arrays: photoconductive liquid crystalline oligothiophene−C60 dyads. J Am Chem Soc2008; 130: 8886–8887.
23.
WadaTZhangYChoYS, et al.Photoconductive crystals for nonlinear optics: molecular design and crystal structure. J Phys D Appl Phys1993; 26: 221–224.
24.
SimonsJ. Equations of motion (EOM) methods for computing electron affinities and ionization potentials. In: GernotCDFrankingGKimKScuseriaG (ed) Theory and applications of computational chemistry. Amsterdam: Elsevier, 2005, p. 461.
25.
JeongKMLiYYooDG, et al.Effects of crosslinking agents on the physical properties of polyimide/amino-functionalized graphene oxide hybrid films. Polym Int2018; 67: 588–597.
26.
TapaswiPKChoiMCNagappanS, et al.Synthesis and characterization of highly transparent and hydrophobic fluorinated polyimides derived from perfluorodecylthio substituted diamine monomers. J Polym Sci Part A Poly Chem2015; 53: 479–488.
27.
NiHJLiuJGWangZH, et al.A review on colorless and optically transparent polyimide films: chemistry, process and engineering applications. J Ind Eng Chem2015; 28: 16–27.
28.
SeymourRWAllegrezzaJR AECooperSL. Segmental orientation studies of block polymers. I. Hydrogen-bonded polyurethanes. Macromolecules1973; 6: 896–902.
29.
SatohMTakahashiMSakamotoT, et al.Structural analysis of the titin gene in hypertrophic cardiomyopathy: identification of a novel disease gene. Biochem Biophys Res Commun1999; 262: 411–417.
30.
KamparsENeilandsOY. The electron affinities of organic electron acceptors. Russ Chem Rev1977; 46: 503.
31.
YouNHHigashiharaTAndoS, et al.Highly refractive polymer resin derived from sulfur-containing aromatic acrylate. J Polym Sci Part A Polym Chem2010; 48: 2604–2609.
32.
YouNHHigashiharaTAndoS, et al.Synthesis of sulfur-containing poly (thioester) s with high refractive indices and high Abbe numbers. Polym Chem2010; 1: 480–484.
33.
LiouJGUedaM.High refractive index polymers: fundamental research and practical applications. J Mater Chem2009; 19: 8907–8919.
34.
GhaemyMHassanzadehMTaghaviM, et al.Synthesis and characterization of trifluoromethylated poly(ether–imidazole–imide)s based on unsymmetrical diamine bearing carbazole and imidazole chromophores in ionic liquids: study of electrochemical properties by using nanocomposite electrode. J Fluorine Chem2012; 142: 29–40.
35.
HasegawaMKochiMMitaI, et al.Molecular aggregation and fluorescence spectra of aromatic polyimides. Eur Polym J1989; 25: 349–354.
36.
AmininasabSMEsmailiSTaghaviM, et al.Fabrication and characterization of novel high-performance fluorinated polyimides with xanthene pendent architecture: study of thermal, photophysical, antibacterial and heavy metal ion adsorption behavior. J Fluo Chem2016; 192: 48–57.
37.
LiQHorieKYokotaR.Absorption, fluorescence and thermal properties of transparent polyimides based on 2, 3, 5-tricarboxycyclopentylacetic acid dianhydride. J Photopolym Sci Tec1998; 11: 237–244.
38.
TakizawaKFukuchiSTakemasaC, et al.Enhancing photoconductivity of aromatic polyimide films by incorporating fluorinated dianhydrides and main chain triphenylamine structure. Polymer2018; 157: 122–130.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
