Abstract
The effects of thermal cycling on a polymerized monomeric reactant (PMR) type polyimide (TriA X) reinforced with carbon fibers were investigated. Composite specimens were subjected to 2000 thermal cycles between −54°C and 232°C. At 400-cycle intervals, laminates were inspected for microcracks, and glass transition temperature (T g) and short-beam shear (SBS) strength were measured. The composites did not exhibit microcracks after thermal cycling, although after 2000 thermal cycles, mechanical properties of the matrix declined slightly. The matrix degradation decreased the resistance to microcracking upon further loading. No effects of thermal oxidative aging were observed from thermal cycling, and thermally driven fatigue and creep were identified as the primary and secondary factors inducing mechanical degradation of the matrix. T g of the composites exhibited no change after 2000 cycles, while the SBS strength decreased slightly (3–9%). The results highlight the potential for use of TriA X composites as long-term structural components in high-temperature service environments.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
