The heat-conducting, dielectric, and bonding properties of a composite adhesive have been enhanced using toluene diisocyanate (TDI) to chemically modify the interface between graphene oxide (GO) and epoxy resin (EP), which was characterized using Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy. The thermal conductivity of TDI10-GO0.5/EP was 0.624 W·m−1·K−1 (166% of EP and 117% of GO0.5/EP), with its TDI10-GO0.5/EP interfacial thermal resistance being reduced by a factor of 36 times GO0.5/EP. The insulating properties of the adhesive in small resistors and capacitors were improved by the inclusion of GO, with the dielectric strength of the adhesive shown to be 25.96 kV·mm−1 and its volume resistivity found to be 1.50 × 1014 Ω·m.
ChenBWangXJWangXZ. Research progress of toughening modification of epoxy resin. Chin Adhes2017; 2: 55–58.
2.
AbadyanMBagheriRKouchakzadehMA. Fracture toughness of a hybrid-rubber-modified epoxy. I. Synergistic toughening. J App Polym Sci2012; 3: 2467–2475.
3.
LiuQLuoWChenY. Enhanced mechanical and thermal properties of CTAB-functionalized graphene oxide-polyphenylene sulfide composites. High Perform Polym2017; 8: 889–898.
4.
LiangCBSongPGuHB. Nanopolydopamine coupled fluorescent nanozinc oxide reinforced epoxy nanocomposites. Compos Part A Appl Sci Manuf2017; 102: 126–136.
5.
GuanLZGongLXTangLC. Mechanical properties and fracture behaviours of epoxy composites with phase-separation formed liquid rubber and preformed powdered rubber nanoparticles: A comparative study. Polym Compos2015; 36: 785–799.
6.
AbadyanMBagherRHaddadpourH. Investigation of the fracture resistance in hoop wound composites modified with two different reactive oligomers. Mater Design2009; 8: 3048–3055.
7.
HuangNJZangJZhangGD. Efficient interfacial interaction for improving mechanical properties of polydimethylsiloxane nanocomposites filled with low content of graphene oxide nanoribbons. RSC Adv2017; 7: 22045–22053.
8.
GongLXTangLCLiuHY. Balanced electrical, thermal and mechanical properties of epoxy composites filled with chemically reduced graphene oxide and rubber nanoparticles. Compos Sci Technol2015; 121: 104–114.
9.
ChenJJChenXNMengFB. Super-high thermal conductivity of polyamide-6/graphene-graphene oxide composites through in situ polymerization. High Perform Polym2017; 5: 585–594.
10.
TangLCWanYJPengK. Fracture toughness and electrical conductivity of epoxy composites filled with carbon nanotubes and spherical particles. Compos Part A Appl Sci Manuf2013; 45: 95–101.
11.
TangLCWangXWanYJ. Mechanical properties and fracture behaviors of epoxy composites with multi-scale rubber particles. Mater Chem Phys2013; 141: 333–342.
12.
AhmedYMZEI-SheikhSMAbd AllahAAEB. Thermal properties and formation mechanism of h-BN nanoneedles synthesized via carbothermic reduction reaction. Int J Appl Ceram Technol2018; 1: 42–52.
MaLWangGJDaiJF. Preparation and properties of graphene oxide/polyimide composites by in situ polymerization and thermal imidization process. High Perform Polym2017; 2: 187–196.
15.
ZhouW. Thermal and dielectric properties of the AlN particles reinforced linear low-density polyethylene composites. Thermochim Acta2011; 512: 183–188.
16.
ZhangYCYuWZhangLY. Thermal conductivity and mechanical properties of low-density silicone rubber filled with Al2O3 and graphene nanoplatelets. J Therm Sci Eng App2018; 1: 11014.
17.
WangCYLanYFLiX. Improving the mechanical, electrical, and thermal properties of polyimide by incorporating functionalized graphene oxide. High Perform Polym2017; 7: 800–808.
18.
ZhengZYCoxMCLiB. Surface modification of hexagonal boron nitride nanomaterials: a review. J Mater Sci2018; 1: 66–99.
19.
ZhangXMZhangJJLiCH. Endowing the high efficiency thermally conductive and electrically insulating composites with excellent antistatic property through selectively multilayered distribution of diverse functional fillers. Chem Eng J2017; 328: 609–618.
20.
SunYYChenLLinJ. Thermal conductivity of epoxy composites filled by thermally reduced graphite oxide with different reduction degree. J Compos Mater2017; 51: 1743–1752.
LiuFDWuLSongYJ. Effect of molecular chain length on the properties of amine-functionalized graphene oxide nanosheets/epoxy resins nanocomposites. RSC Adv2015; 57: 45987–45995.
23.
LeiLQShanJYHuJH. Co-curing effect of imidazole grafting graphene oxide synthesized by one-pot method to reinforce epoxy nanocomposites. Compos Sci Technol2016; 128: 161–168.
24.
WangFZDrzalLTQinY. Mechanical properties and thermal conductivity of graphene nanoplatelet/epoxy composites. J Mater Sci2015; 3: 1082–1093.
25.
BaoRYanSLWangRG. Experimental and theoretical studies on the adjustable thermal properties of epoxy composites with silver-plated short fiberglass. J Appl Polym Sci2017; 48: 1–7.
26.
BalandinAAGhoshSBaoWZ. Superior thermal conductivity of single-layer graphene. Nano Lett2008; 3: 902–907.
27.
MortazaviBRabczukT. Multiscale modeling of heat conduction in gaphene laminates. Carbon2015; 85: 1–7.
28.
LiuZJZhangY. Enhanced mechanical and thermal properties of SBR composites by introducing graphene oxide nanosheets decorated with silica particles. Compos Part A Appl Sci Manuf2017; 102: 236–242.
29.
AmamouWLinZSBarenJV. Contact induce spin relaxation in graphene spin with Al2O3 and MgO tunnel barriers. APL Mater2016; 4: 032503.
30.
ChatterjeeSNafezarefiFTaiNH. Size and synergy effects of nanofiller hybrids including graphene nanoplatelets and carbon nanotubes in mechanical properties of epoxy composites. Carbon2012; 50: 5380–5386.
31.
LuHFZhangJLuoJ. Enhanced thermal conductivity of free-standing. 3D hierarchical carbon nanotube-graphene hybrid paper. Compos Part A Appl Sci Manuf2017; 102: 1–8.
32.
SafdriMAl-HaikMS. Synergistic Electrical and thermal transport properties of hybrid polymeric nanocomposites based on carbon nanotubes and graphite nanoplatelets. Carbon2013; 64: 111–121.
33.
SunYFTangBHuangWQ. Preparation of graphene modified epoxy resin with high thermal conductivity by optimizing the morphology of filler. Appl Thermal Eng2016; 103: 892–900.
34.
FuYXHeZXMoDC. Thermal conductivity enhancement of epoxy adhesive using graphene sheets as additives. Int J Therm Sci2014; 86: 276–283.
35.
GuJWYangXTLvZY. Functionalized graphene nanoplatelets/epoxy resin nanocomposites with high thermal conductivity. Int J Heat Mass Transf2016; 92: 15–22.
KausarARrfiqueIAnwarZ. Perspectives of epoxy/graphene oxide composite: significant features and technical applications. Polym Plast Technol Eng2016; 55: 704–722.
38.
SahaMTambePPalS. Thermodynamic approach to enhance the dispersion of graphene in epoxy matrix and its effect on mechanical and thermal properties of epoxy nanocomposites. Compos Interface2016; 23: 255–272.
39.
AnFLiXFMinP. Highly anisotropic graphene/boron nitride hybrid aerogels with long-range ordered architecture and moderate density for highly thermally conductive composites. Carbon2018; 126: 119–127.
40.
TangBWangMCLiuRM. A heat-resistant preceramic polymer with broad working temperature range for silicon carbide joining. J Eur Ceram Soc2018; 1: 67–74.
41.
PanYTWanJTZhaoXL. Interfacial growth of MOF-derived layered double hydroxide nanosheets on graphene slab towards fabrication of multifunctional epoxy nanocomposites. Chem Eng J2017; 330: 1222–1231.
42.
ChenLLiuYJLengJS. Microwave responsive epoxy nanocomposites reinforced by carbon nanomaterials of different dimensions. J Appl Polym Sci2018; 2: 45676.
43.
GuXZhangZJYuanL. Developing high performance cyanate ester resin with significantly reduced postcuring temperature while improved toughness, rigidity, thermal and dielectric properties based on manganese-Schiff base hybridized graphene oxide. Chem Eng J2016; 298: 214–224.
44.
MaLLiNWuG. Interfacial enhancement of carbon fiber composites by growing TiO2 nanowires onto amine-based functionalized carbon fiber surface in supercritical water. Appl Surf Sci2018; 433: 560–567.
LiKYKuanCFKuanHC. Preparation and properties of novel epoxy/graphene oxide nanosheets (GON) composites functionalized with flame retardant containing phosphorus and silicon. Mater Chem Phys2014; 3: 354–362.
47.
HwangYHeoYYooY. The addition of functionalized graphene oxide to polyetherimide to improve its thermal conductivity and mechanical properties. Polym Adv Technol2014; 25: 1155–1162.
48.
LinPMengLHHuangYD. Simultaneously functionalization and reduction of graphene oxide containing isocyanate groups. Appl Surf Sci2015; 1: 784–790.
49.
WanYJTangLCGongLX. Grafting of epoxy chains onto graphene oxide for epoxy composites with improved mechanical and thermal properties. Carbon2014; 69: 467–480.
ZhouHZhangSMYangMS. The effect of heat-transfer passages on the effective thermal conductivity of high filler loading composite materials. Compos Sci Technol2007; 67: 1035–1040.
52.
AgariYUnoT. Estimation on thermal-conductivity of filled polymers. J Appl Polym Sci1986; 32: 5702–5712.
53.
CaseroEParra-AlfambraAMPetit-DominguezMD. Differentiation between graphene oxide and reduced graphene by electrochemical impedance spectroscopy (EIS). Electrochem Comm2012; 20: 63–66.
54.
SuHFWangTZhangSY. Facile synthesis of polyaniline/TiO2/graphene oxide composite for high performance supercapacitors. Solid State Sci2012; 6: 677–681.
55.
ParhizkarNShahrabiTRamezanzadehB. A new approach for enhancement of the corrosion protection properties and interfacial adhesion bonds between the epoxy coating and steel substrate through surface treatment by covalently modified amino functionalized graphene oxide film. Corros Sci2017; 123: 55–75.
56.
LeiQQTianFQYangC. Modified isothermal discharge current theory and its application in the determination of trap level distribution in polyimide films. J Electrostat2010; 68: 243–248.
57.
LiaoWHYangSYWangJY. Effect of molecular chain length on the mechanical and thermal properties of amine-functionalized graphene oxide/polyimide composite films prepared by in situ polymerization. ACS Appl Mater Interf2013; 5: 869–877.
58.
GongLXPeiYBHanQY. Polymer grafted reduced graphene oxide sheets for improving stress transfer in polymer composites. Compos Sci Technol2016; 134: 144–152.
59.
ZangJWanYJZhaoL. Fracture behaviors of TRGO-filled epoxy nanocomposites with different dispersion/interface levels. Macromol Mater Eng2015; 300: 737–749.
60.
GuanLZWanYJGongLX. Toward effective and tunable interphases in graphene oxide/epoxy composites by grafting different chain lengths of polyetheramine onto graphene oxide. J Mater Chem A2014; 2: 15058–15069.
61.
WanYJGongLXTangLC. Mechanical properties of epoxy composites filled with silane-functionalized graphene oxide. Compos Part A Appl Sci Manuf2014; 64: 79–89.
62.
WanYJTangLCYanD. Improved dispersion and interface in the graphene/epoxy composites via a facile surfactant-assisted process. Compos Sci Technol2013; 82: 60–68.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
