Thermal and mechanical properties of cyanate ester resin modified with acid-treated multiwalled carbon nanotubes

Abstract

Multiwalled carbon nanotubes (MWCNTs) that were treated with mixed acids were used to reinforce the cyanate ester resin. Meanwhile, the relationship among structure, morphology, and property of the modified resin was investigated. The treated MWCNTs were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis, and X-ray photoelectron spectroscopy (XPS). The XPS results showed that the oxygen content in the treated MWCNTs was higher than that of untreated MWCNTs and the FTIR results indicated the presence of oxygen-containing functional groups on the treated MWCNTs. The microstructure of the resin was characterized by scanning electron microscopy and transmission electron microscopy. The results showed that the dispersion properties of the treated MWCNTs in the resin matrix were improved and compared with the untreated analogue. Addition of MWCNTs to the resin had little effect on the thermodynamic properties of the resin system. Upon addition of 0.8 wt% of MWCNTs to the resin, the glass transition temperature of the cured resin changed from 298°C to 285°C, maintaining a relatively high value. For the resins containing 0.6 wt% of treated MWCNTs, the plane strain critical stress intensity factor and plane strain critical strain energy release rate in the system were determined to be 1.39 Pa·m^0.5 and 364 J m⁻², respectively, and the fracture toughness is increased by 45.7 and 76.0%, respectively. Furthermore, the modified resin system exhibits excellent toughness and thermal properties. Therefore, the modified resin may be suitable for future applications involving high performance composites and adhesives.

Keywords

Cyanate ester carbon nanotubes blending modification fracture toughness

Get full access to this article

View all access options for this article.

References

Wang

Liang

Jiao

. Two-layer materials of polyethylene and a carbon nanotube/cyanate ester composite with high dielectric constant and extremely low dielectric loss. Carbon 2013; 54: 224–233.

Han

Liang

. Carbon nanotubes/cyanate ester composites with low percolation threshold, high dielectric constant and outstanding thermal property. Compos Part A Appl S 2010; 41: 1321–1328.

Liang

. Thermally conductive aluminum nitride–multiwalled carbon nanotube/cyanate ester composites with high flame retardancy and low dielectric loss. Ind Eng Chem Res 2013; 52: 3342–3353.

Yuan

Feng

Judeh

. Use of polyimide-graft-bisphenol a diglyceryl acrylate as a reactive noncovalent dispersant of single-walled carbon nanotubes for reinforcement of cyanate ester/epoxy composite. Chem Mater 2011; 22: 6542–6554.

Wang

Qin

Liang

. High-k materials with low dielectric loss based on two superposed gradient carbon nanotube/cyanate ester composites. J Phys Chem C 2013; 117: 15487–15495.

Gao

Scrivens

. Nanomechanical characterization of single-walled carbon nanotube reinforced epoxy composites. Nanotechnology 2004; 15: 1416–1423.

Coleman

Khan

Gun′ko

. Mechanical reinforcement of polymers using carbon nanotubes. Adv Mater 2006; 18: 689–706.

Liang

. Novel permittivity gradient carbon nanotubes/cyanate ester composites with high permittivity and extremely low dielectric loss. J Mater Chem 2011; 21: 14838–14848.

Liu

Rinzler

Dai

. Fullerene pipes. Science 1998; 280: 1253–1256.

10.

Fang

Wang

. Structure and properties of multiwalled carbon nanotubes/cyanate ester composites. Polym Eng Sci 2006; 46: 670–679.

11.

Scarpa

Peng

. Design of a hybrid carbon fibre/carbon nanotube composite for enhanced lightning strike resistance. Aerosp Sci Technol 2015; 47: 367–377.

12.

Ganguli

Bhuyan

Allie

. Effect of multi-walled carbon nanotube reinforcement on the fracture behavior of a tetrafunctional epoxy. J Mater Sci 2005; 40: 3593–3595.

13.

Tang

Kong

. Reinforced cyanate ester resins with carbon nanotubes: surface modification, reaction activity and mechanical properties analyses. Polym-Plast Technol 2009; 48: 359–366.

14.

Lago

Tsang

. Filling carbon nanotubes with small palladium metalcrystallites: the effect of surface acid groups. J Chem Soc Chem Commun 1995; 13: 1355–1356.

15.

Chen

. Effect of functionalization of multi-walled carbon nanotube on mechanical and viscoelastic properties of polysulfide-modified epoxy nanocomposites. High Perform Polym 2016; 28: 1–10.

16.

Liu

Shen

Zhu

. Organizing single-walled carbon nanotubes on gold using a wet chemical self-assembling technique. Langmuir 2000; 16: 3569–3573.

17.

Baishya

Maji

. Functionalization of MWCNT and their application in properties development of green wood nanocomposite. Carbohyd Polym 2016; 149: 332–339.

18.

Sreekanth

Ghosh

Biswas

. Improved field emission from indium decorated multi-walled carbon nanotubes. Appl Surf Sci 2016; 383: 84–89.

19.

Wang

. Effect of functionalized multi-walled carbon nanotubes on the curing behavior and thermal stability of epoxy resin. High Perform Polym 2012; 24: 97–104.

20.

Meng

Wang

Zhang

. Fabrication and properties of polyamide-6,6-functionalized carboxylic multi-walled carbon nanotube composite fibers. High Perform Polym 2010; 22: 848–862.

21.

Hussain

Abbas

Kausar

. New polyaniline/polypyrrole/polythiophene and functionalized multiwalled carbon nanotube-based nanocomposites: layer-by-layer in situ polymerization. High Perform Polym 2013; 25: 70–78.

22.

Zhao

Wang

. Bis[4-(4-maleimidephen-oxy)phenyl]propane/N, N -4,4′-bismaleimidodiphenylmethyene blend modified with diallyl bisphenol A. J Appl Polym Sci 2014; 131: 40395(1–8).

23.

Han

Zhou

. Toughness reinforcement of bismaleimide resin using functionalized carbon nanotubes. High Perform Polym 2014; 26: 874–883.

24.

Abdolmaleki

Mallakpour

Rostami

. The fabrication and characterization of nanocomposites containing new poly(amide-imide) based on 4,4-methylenebis(3-chloro-2,6-diethyl trimellitimidobenzene) and carboxylic acid-functionalized multiwalled carbon nanotubes. High Perform Polym 2016; 28: 255–262.

25.

Dittanet

Pearson

. Effect of bimodal particle size distributions on the toughening mechanisms in silica nanoparticle filled epoxy resin. Polymer 2013; 54: 1832–1845.

26.

Chandrasekaran

Sato

Tölle

. Fracture toughness and failure mechanism of graphene based epoxy composites. Compos Sci Technol 2014; 97: 90–99.

27.

Yong

Qian

Chan

. Epoxy toughening with low graphene loading. Adv Funct Mater 2014; 25: 575–585.

28.

Gojny

Wichmann

Köpke

. Carbon nanotube-reinforced epoxy-composites: enhanced stiffness and fracture toughness at low nanotube content. Compos Sci Technol 2004; 64: 2363–2371.

29.

Hsieh

Kinloch

Taylor

. The effect of carbon nanotubes on the fracture toughness and fatigue performance of a thermosetting epoxy polymer. J Mater Sci 2011; 46: 7525–7535.

30.

Liang

. Bismaleimide/carbon nanotube hybrids for potential aerospace application: I. Static and dynamic mechanical properties. Polym Adv Technol 2007; 18: 835–840.