Preparation and curing behavior of high-stress solid propellant binder based on polydicyclopentadiene

Abstract

The ring-opening metathesis polymerization reaction of dicyclopentadiene (DCPD) was carried out using Grubbs first generation catalyst. Fourier transform infrared (FTIR), dynamic-thermo mechanical analysis (DMA), and Raman spectroscopy were used to investigate the curing behavior of this polymer. The FTIR results showed that DCPD had not cured completely and the polymers were composed of linear and cross-linked polydicyclopentadiene (PDCPD). The DMA test showed that the polymer possesses the glass transition temperature of linear PDCPD and cross-linked PDCPD, which had also proved the FTIR result. Furthermore, in order to explain the strange phenomenon that the band at 3004 cm⁻¹ should have been detected in infrared spectrum, the Raman spectrum of PDCPD was applied to analyze the bonding mechanism of =C–H bond in the process of polymerization. Moreover, the real-time FTIR result cure formula showed that the cure degree increases first then constants trend with cure time of increasing, the cure degree reached the maximum value (96.76%) at 60°C for 192 h.

Keywords

PDCPD FTIR DMA cure behavior electronegative theory cure degree

Get full access to this article

View all access options for this article.

References

Bielawski

Grubbs

. Living ring-opening metathesis polymerization. Prog Polym Sci 2007; 32: 1–29.

Davidson

. The polymerization of dicyclopentadiene an investigation of mechanism. J Mol Catal A-Chem 1998; 133: 67–74.

Knorr

Masser

Elder

. Overcoming the structural versus energy dissipation trade-off in highly crosslinked polymer networks: ultrahigh strain rate response in polydicyclopentadiene. Compos Sci Technol 2015; 114: 17–25.

Aldridge

Shankar

Zhen

. Combined experimental and simulation study of the cure kinetics of DCPD. J Compos Mater 2010; 18: 1827–1835.

Jeong

Kessler

. Toughness enhancement in ROMP functionalized carbon nanotube/polydicyclopentadiene composites. Chem Mater 2008; 20: 7060–7068.

Bluestone

Heister

Son

. Development of composite solid propellants based on dicyclopentadiene binder. In: 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Nashville, TN, 25–28 July 2010, paper no. AIAA 2010-6589, pp. 850–864. Tennessee: 46th AIAA/ASME/SAE/ASEE.

Corpening

Heister

Palmer

. Combustion of advanced non-toxic hybird propellants. Intern J Alter Propul 2007; 20: 154–173.

Ruiz

Machado

LDB

Vanin

. Cure degree estimation of photocurable coatings by DSC and differential photocalorimetry. J Therm Anal Cal Orim 2002; 2: 335–341.

Dds

ülker

Dds

. Silorane-based composite: depth of cure, surface hardness, degree of conversion, and cervical microleakage in class II cavities. J Esthet Restor Dent 2011; 5: 324–335.

10.

Shin

Schwartz

. Determination of the degree of cure of dental resins using Raman and FT-Raman spectroscopy. Dent Mater J 1993; 5: 317–324.

11.

Rohde

Robertson

. Concurrent curing kinetics of an anhydride-cured epoxy resin and polydicyclopentadiene. Polymer 2015; 69: 204–214.

12.

O’Neil

Heister

. Investigation of the effect of gelling agents on dicyclopentadiene’s rheological characteristics for improvement of composite solid propellant quality. In: 48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Atlanta, Georgia, 30 July–01 August 2012, paper no: AIAA 2012-4319, pp. 1–12. Georgia: 48th AIAA/ASME/SAE/ASEE.

13.

Muhlebach

Schaaf

Hafner

. Thermal stability and degradation of hydrocarbon metathesis polymers. J Mole Cata A Chem 1998; 132: 181–188.

14.

Kovačič

Krajnc

Slugovc

. Inherently reactive polyHIPE material from dicyclopentadiene. Chem Commun 2010; 46: 7504.

15.

Aldridge

Shankar

Zhen

. Combined experimental and simulation study of the cure kinetics of DCPD. J Compos Mater 2011; 45: 1827–1835.

16.

Liu

Sheng

Lee

. Isothermal cure characterization of dicyclopentadiene - The glass transition temperature and conversion. J. Therm Anal Cal 2007; 89: 453–457.

17.

Barnes

. Raman spectroscopic studies of the cure of dicyclopentadiene. Spectrochim Acta A 2005; 61: 2946–2952.

18.

Schaubroeck

Brughmans

Vercaemst

. Qualitative FT-Raman investigation of the ring opening metathesis polymerization of dicyclopentadiene. J Mole Cata A-Chem 2006; 254: 180–185.

19.

Shuxin

. Ring-opening polymerization. Beijing: Chemical Industry Press of China, 1987.

20.

Xiuxiong

. Polymerization thermodynamics. Beijing: Science Press of China, 1985.

21.

Schrader

. Infrared and raman spectroscopy: methods and applications. Weinheim: Wiley VCH, 1995.

22.

Lenhardt

Kim

Nelson

. Increasing the oxidative stability of poly(dicyclopentadiene) aerogels by hydrogenation. Polymer 2013; 54: 542–547.

23.

Sanderson

. Electronegativities in inorganic chemistry. J Chem Educ 1954; 11: 539–544.

24.

Sanderson

. Carbon—carbon bond lengths. Science 1952; 116: 41–42.

25.

Carter

. Molecular symmetry and group theroy. New York: Wiley Interscience, 1998.

26.

Bluestone

. Development of composite solid propellent using dicyclopentadien binder. West Lafayette: Purdue University, 2010.

27.

Hinkelman

. Development and testing of dicyclopentadiene based solid composite propellants. Indiana: Purdue University, 2011.

28.

Sheng

Lee

Kessler

. Influence of cross-link density on the properties of ROMP thermosets. Polymer 2009; 50: 1264–1269.

29.

Hine

Leejarkpai

Khosravi

. Structure property relationships in linear and cross-linked poly(imidonorbornenes) prepared using ring opening metathesis polymerisation (ROMP). Polymer 2001; 23: 9413–9422.