The molecular dynamics of flax-reinforced ethylene–propylene–diene monomer (EPDM) composites, with increasing quantities of flax (EPDM0–EPDM20), was investigated by dynamic mechanical analysis. Multifrequency experiments were also performed in order to distinguish between the relaxation and the kinetic events. Also the time–temperature superposition was applied to the multifrequency results for obtaining the master curves. They were used to anticipate the behavior of the composites in time and to calculate the activation energies using the Williams–Landel–Ferry equation.
YanLChouwNJayaramanK. Flax fibre and its composites – A review. Compos Part B-Eng2014; 56: 296–317.
2.
MüssigJHaagK. The use of flax fibres as reinforcements in composites. In: FarukOSainM (eds) Biofiber Reinforcements in Composites. Cambridge: Woodhead Publishing Series in Composites Science and Engineering, Elsevier, 2015, pp. 35–85.
3.
BosHL. The potential of flax fibres as reinforcement for composite materials. PhD Thesis, Eindhoven University of Technology, Eindhoven, The Netherlands, 2004.
4.
BosHLMüssigJvan den OeverMJA. Mechanical properties of short-flax-fibre reinforced compounds. Compos Part A-Appl S2006; 37: 1591–1604.
5.
van den OeverMJABosHLMolenveldK. Flax fibre physical structure and its effect on composite properties: impact strength and thermomechanical properties. Angew Makromol Chem1999; 272: 71–76.
6.
WilliamsMLLandelRFFerryJD. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids. J Am Chem Soc1955; 77: 3701–3707.
7.
FerryJD. Viscoelastic properties of polymers. 3rd ed. New York: John Wiley & Sons, 1980.
8.
ChartoffRPMenczelJDDillmanSH. Dynamic mechanical analysis. In: MenczelJDPrimeRB (eds) Thermal Analysis of Polymers. Fundamentals and Applications. New Jersey: John Wiley & Sons, Inc., 2009, pp. 387–495.
9.
CapodagliJLakesR. Isotermal viscoelastic properties of PMMA and LDPE over 11 decades of frequency and time: a test of time-temperature superposition. Rheol Acta2008; 47: 777–786.
10.
WielageBLampkeTUtschickH. Processing of natural-fibre reinforced polymers and the resulting dynamic mechanical properties. J Mater Process Tech2003; 139: 140–146.
11.
SiengchinSDangtungeeR. Effect of woven flax structures on morphology and properties of reinforced modified polylactide composites. J Thermoplast Compos2013; 26: 1424–1440.
12.
CheremisinoffNP. Spotlight on EPDM elastomers. Polym Plast Technol1992; 31: 713–744.
WypychG. Handbook of polymers. Toronto: ChemTecPub, 2012.
15.
WazzanAA. Influence of fillers and curing system on the physical mechanical properties and stability of EPDM vulcanizates. Int J Polym Mater2005; 54: 783–794.
16.
DuncanJ. Principles and applications of mechanical thermal analysis. In: GabbottP (ed.) Principles and Applications of Thermal Analysis. Oxford: Blackwell Publishing Ltd., 2008, pp. 119–163.
NazhatSN. Thermal analysis of biomaterials. In: GabbottP (ed.) Principles and Applications of Thermal Analysis. Oxford: Blackwell Publishing Ltd., 2008, pp. 256–285.
19.
ChailanJFBoiteuxGChauchardJ. Viscoelastic and dielectric study of thermally aged ethylene-propylene diene monomer (EPDM) compounds. Polym Degrad Stabil1995; 47: 397–403.
20.
SevereGHarrisDMacoskoC. Dynamic mechanical analysis of aromatic polyamide/ethylene-propylene-diene terpolymer laminates. In: 59th Annual Technical Conference & Exhibition ANTEC 2001 Conference Proceeding, Vol. II, Dallas, Texas, 6–10 May 2001, pp. 1910–1914. Brookfield, Connecticut: Society of Plastics Engineers.
21.
Delor-JestinFLacosteJBarrouis-OudinN. Photo-, thermal and natural ageing of ethylene-propylene-diene monomer (EPDM) rubber used in automotive applications. Influence of carbon black, crosslinking and stabilizing agents. Polym Degrad Stabil2000; 67: 469–477.
AkibaMHashimAS. Vulcanization and crosslinking in elastomers. Prog Polym Sci1997; 22: 475–521.
24.
CristeaMIonitaDSimionescuBC. A new insight in the dynamo-mechanical behavior of poly(ethylene terephthalate). Eur Polym J2010; 46: 2005–2012.
25.
LeeCYCGoldfarbIJ. The glass transition temperature of partially cured polymers as a non-equilibrium parameter and its effect on observed dynamic mechanical behavior. Polym Eng Sci1981; 21: 951–957.
26.
CristeaMIonitaDDorofteiF. Effect of long-term and short-term dynamic mechanical evaluation of networks based on urethane and soybean oil. J Mech Behav Biomed Mater2013; 17: 317–326.
27.
ChakravartulaAKomvopouosK. Viscoelastic properties of polymer surfaces investigated by nanoscale dynamic mechanical analysis. Appl Phys Lett2006; 88: 131901/1–131901/3.
28.
FloresAPierucciniMNöchelU. Recrystallization studies on isotropic cold-crystallized PET: influence of heating rate. Polymer2008; 49: 965–973.
29.
AlvesNMManoJFGomez RibellesJL. Departure from the Vogel behaviour in the glass transition-thermally stimulated recovery, creep and dynamic mechanical analysis studies. Polymer2004; 45: 1007–1017.
30.
HeY. Thermomechanical and viscoelastic behavior of a no-flow underfill material for flip-chip applications. Thermochim Acta2005; 439: 127–134.
31.
RamaniRAlamS. The effect of an organophosphonite antioxidant on poly(ether ether ketone)/poly(ether imide) blend as studied by quasi-isothermal modulated scanning calorimetry and dynamic mechanical thermal analysis methods. High Perform Polym2014; 26: 347–356.
32.
MustoPAbbateMLavorgnaM. Microstructural features, diffusion and molecular relaxations in polyimide/silica hybrids. Polymer2006; 47: 6172–6186.
