Influence of polytetrafluoroethylene (PTFE) content on mechanical and tribological properties of poly(ether ether ketone)/PTFE coatings prepared by electrostatic powder spraying technique
Restricted accessResearch articleFirst published online February, 2015
Influence of polytetrafluoroethylene (PTFE) content on mechanical and tribological properties of poly(ether ether ketone)/PTFE coatings prepared by electrostatic powder spraying technique
Poly(ether ether ketone) (PEEK)/polytetrafluoroethylene (PTFE) composite coatings with different PTFE contents were successfully fabricated using electrostatic spraying. The crystalline structure of the PEEK/PTFE coatings was characterized by X-ray diffraction analysis. The effects of PTFE addition in the composite coatings on the hardness, adhesion, and tribological performance were discussed. The hardness and adhesion level of PEEK/PTFE coatings were not significantly affected by the addition of PTFE, which indicated that the coating possesses excellent mechanical properties. The PEEK/PTFE coatings showed better tribological performance than traditional PEEK coating. The PTFE/PTFE-3 (3 wt% mass fraction of PTFE in composite coating) coating has a friction coefficient of 0.133 (PEEK is 0.149) and wear rates of 3.8 × 10−5 mm3 N−1 m−1 (PEEK is 4.4 × 10−5 mm3 N−1 m−1).
AttwoodTEDawsonPCFreemanJL. Synthesis and properties of polyaryletherketones. Polymer1981; 22: 1096–1103.
2.
WilliamsDFMcNamaraATurnerRM. Potential of polyetheretherketone (PEEK) and carbon-fibre-reinforced PEEK in medical applications. J Mater Sci Lett1987; 6: 188–190.
3.
TanKHChuaCKLeongKF. Scaffold development using selective laser sintering of polyetheretherketone–hydroxyapatite biocomposite blends. Biomaterials2003; 24: 3115–3123.
4.
FriedrichKAlmajidAA. Manufacturing aspects of advanced polymer composites for automotive applications. Appl Compos Mater2013; 20: 107–128.
5.
BishopSM. The mechanical performance and impact behaviour of carbon-fibre reinforced PEEK. Compos Struct1985; 3: 295–318.
6.
SarasuaJRRemiroPMPouyetJ. The mechanical behaviour of PEEK short fibre composites. J Mater Sci1995; 30: 3501–3508.
7.
KuoMCTsaiCMHuangJC. PEEK composites reinforced by nano-sized SiO2 and Al2O3 particulates. Mater Chem Phys2005; 90: 185–195.
8.
Rahail ParvaizMThoratPVMahanwarPA. Dynamic mechanical analysis and morphological studies of fly ash/mica reinforced poly (ether-ether-ketone)-based hybrid composites. Polym Compos2014; 35: 68–78.
9.
BriscoeBJYaoLHStolarskiTA. The friction and wear of poly(tetrafluoroethylene)–poly(etheretherketone) composites: an initial appraisal of the optimum composition. Wear1986; 108: 357–374.
10.
HanchiJEissNSJr. The tribological behavior of blends of polyetheretherketone (PEEK) and polyetherimide (PEI) at elevated temperatures. Tribol Trans1994; 37: 494–504.
11.
KuoCFJSuTL. Optimization of multiple quality characteristics for polyether ether ketone injection molding process. Fibers Polym2006; 7: 404–413.
12.
GadowRSchererD. Composite coatings with dry lubrication ability on light metal substrates. Surf Coat Technol2002; 151: 471–477.
13.
TaloAPassiniemiPForsenO. Polyaniline/epoxy coatings with good anti-corrosion properties. Synth Met1997; 85: 1333–1334.
14.
BaeumlFWelschT. Improvement of the long-term stability of polyimide-coated fused-silica capillaries used in capillary electrophoresis and capillary electrochromatography. J Chromatogr A2002; 961: 35–44.
15.
ZhangGLiaoHYuH. Correlation of crystallization behavior and mechanical properties of thermal sprayed PEEK coating. Surf Coat Technol2006; 200: 6690–6695.
16.
LiJLiaoHCoddetC. Friction and wear behavior of flame-sprayed PEEK coatings. Wear2002; 252: 824–831.
17.
ZhangGLiaoHLiH. On dry sliding friction and wear behaviour of PEEK and PEEK/SiC-composite coatings. Wear2006; 260: 594–600.
18.
NormandBTakenoutiHKeddamM. Electrochemical impedance spectroscopy and dielectric properties of polymer: application to PEEK thermally sprayed coating. Electrochim Acta2004; 49: 2981–2986.
19.
WuJMunroePRWithyB. Study of the splat–substrate interface for a PEEK coating plasma-sprayed onto aluminum substrates. J Therm Spray Technol2010; 19: 42–48.
20.
CorniINeumannNEiflerD. Polyetheretherketone (PEEK) coatings on stainless steel by electrophoretic deposition. Adv Eng Mater2008; 10: 559–564.
21.
BoccacciniARPetersCRoetherJA. Electrophoretic deposition of polyetheretherketone (PEEK) and PEEK/Bioglass® coatings on NiTi shape memory alloy wires. J Mater Sci2006; 41: 8152–8159.
22.
SimoninLLiaoH. Characterization of flame-sprayed PEEK coatings by FTIR-ATR, DSC and acoustic microscopy. Macromol Mater Eng2000; 283: 153–162.
23.
PalathaiTTharajakJSombatsompopN. Hardness, adhesion index and microstructure of PEEK coating on Al or Fe substrate by LVOF flame spray. Mater Sci Eng A2008; 485: 66–73.
24.
HedayatiMSalehiMBagheriR. Tribological and mechanical properties of amorphous and semi-crystalline PEEK/SiO2 nanocomposite coatings deposited on the plain carbon steel by electrostatic powder spray technique. Prog Org Coat2012; 74: 50–58.
25.
ZhangGGuessasmaSLiaoH. Investigation of friction and wear behaviour of SiC-filled PEEK coating using artificial neural network. Surf Coat Technol2006; 200: 2610–2617.
